Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,200 lbs
(803 reviews)
Price: $62.76
In Stock
Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,200 lbs
Item # MJ-1200B
Retail:$70.85
Our Price: $62.76
You Save: 11%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (803)
- Q & A (0)
- Photos
etrailer Trailer Jack - MJ-1200B
- Boat Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 11 Inch Lift
- With Wheel
- Steel
- etrailer
Corrosion-resistant, clear zinc swivel jack with 5-3/4" wheel is perfect for marine use as well as other recreational applications. Jack has an extended height of 23-1/2", a retracted height of 12-1/2", and a capacity of 1,200 lbs.
Features:
- Marine jack lets you raise and lower your boat or recreational trailer
- Swivel design lets you swing jack up for storage, down for use
- 4-Bolt mounting plate provides extra side load support
- Convenient 1/2", spring-loaded pull pin secures and releases jack
- Plastic wheel lets you easily move your trailer
- Inner tube rotates with wheel allowing you to move in any direction
- Sidewind handle has comfortable, grooved grip
- Corrosion-resistant clear zinc finish for durability
- Bolt-on installation to the side of your trailer
- Mounting bracket and hardware included
Specs:
- Application: trailers with a frame height from 2" to 4"
- Bracket height (from bottom of wheel to center of bracket):
- 12-1/2" Retracted
- 23-1/2" Extended
- Travel: 11"
- Outer tube diameter: 2"
- Inner tube diameter: 1-3/4"
- Wheel dimensions: 5-3/4" diameter x 2" wide
- Mounting bracket dimensions: 6-7/8" long x 5-3/4" wide
- Bolt dimensions: 3-15/16" long from bottom of the bolt head to the end of the threads
- 2" From bottom of the bolt head to the first thread
- Handle radius: 6-5/8"
- Lift capacity: 1,200 lbs
- 1-Year warranty
MJ-1200B Ram Round Swivel Marine Jack - Bolt On - Zinc - Side Wind - 11" Travel - 1,200 lbs
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- etrailer mistake
- Did not arrive in time
- Alternate product found
Customer Reviews
Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,200 lbs - MJ-1200B
Average Customer Rating: 4.8 out of 5 stars (803 Customer Reviews)
Corrosion-resistant, clear zinc swivel jack with 5-3/4" wheel is perfect for marine use as well as other recreational applications. Jack has an extended height of 23-1/2", a retracted height of 12-1/2", and a capacity of 1,200 lbs.by: Joe08/01/2018
Very nice! Very easy to install. I never thought it would be so easy to reposition my boat in the garage. Moves so smoothly raising/lowering my trailer on/off my hitch. My only wish is that I would have replaced my old jack sooner! I highly recommend this wheel jack...
by: KC04/21/2017
I purchased my Mj-1200B trailer jack last year for my DJ equipment trailer. The quality is great and more heavy duty than I probably need for a small 4x6' trailer but I couldn't be without it. No issues what so ever and so I'm very happy with the purchase!
by: Al S.09/26/2022
So this boat trailer had an Atwood jack and the mounting bracket was actually welded on the frame. Got lucky as the round hole after removing all the mounting hardware fit on the welded bracket. Had to drill out catch holes but all is well!
by: RichardG09/12/2022
The swivel jack w/wheel was exactly what I was looking for...it is being used on my ATV wagon...the swivel jack has a large wheel for easy maneuverability...large load capability...
by: Robert 03/26/2024
Always the best company to do business with. Highest quality
by: Jan 07/13/2023
Ordered this trailer jack for a small 8x10 cargo trailer/camper. Fits perfectly, solid build and is exactly what we were looking for. Great customer support from Etrailer with this order. Thank you!!
by: Don05/15/2020
Got it installed. Could have used a 2nd pair of hands however it appears like it will solve the issue of having to lift the trailer up. Very happy with it
by: Luke 10/01/2022
Haven't used it yet, but seems solid!
by: Burt04/06/2019
This Jack is the perfect fit for any trailer and makes it so much easier to move around on smooth surfaces.
by: Floridaman09/30/2023
Great replacement fo the stock jack
by: Stephen 04/15/2021
Easy to install. Makes hitching up so much easier, especially on the back. Works great.
Stephen
4/16/2022
Works great, looks like new. Makes hitching up a breeze.
by: Jeffrey 11/09/2023
Worked as advertised
by: Craig B10/11/2017
Had a hard time finding a trailer jack for my boat. It was unique and did not what to place jack in a different place on the trailer frame. I sent in photos of what I had. Within in a day I had a response with the correct jack and they shipped it that day. Got it 2 days later installed at the lake today, it works perfect. These guys and gals know there stuff. Excellent customer service!!!
Craig B.
10/11/2018
Jack is working great. Make about 30 trips to the lake this year. Great product!!
by: Kevin L.06/27/2017
I attached this to my Casita Trailer and removed the factory installed one so that I could use my tailgate without hitting it on the hitch. Worked like a dream and was able to install with ease in 5 minutes.
Kevin L.
6/27/2018
Still very happy. I wish the wheel was detachable and a foot could be installed. Sometimes the wheel is a bit too tall for unhooking from my Tacoma.
by: Timothy 09/09/2023
Just what I needed.Easy to install. Sara wasc very helpful.
by: Dan 01/24/2023
i use e trailer for all my trailer and camper needs. i always receive great service and they provide quality parts. thanks e trailer!!
11
by: Kerry 08/21/2023
Great customer service
by: Juan 09/23/2023
just what we needed and at a really good price.
by: Jeff O.12/08/2020
This jack works great. It is so much easier to use than my old one.
I can recommend it.
by: David01/08/2023
Great stuff at a great price, I have 8 trailers and this is the only place to shop
by: Matt 12/29/2022
Inexpensive but perfect for kayak trailer. E trailer shopping, shipping and service is best in class.
by: Robert Scott C.01/13/2017
I wanted the ability to detach from my utility trailer while it was loaded. My KIA Soul's receiver was close to the road so required a swivel jack with a very low retracted position. Was looking for something in the 10.5" range. This Jack had the lowest advertised height of 12.5" to the center line of the tounge tube. It occurred to me that the 12.5" was derived from the pivot point assuming a 4" tounge and mine was a 3". This gained me .5" towards my goal. I also discovered that if I mounted the bracket upside down from the instructions I would gain an inch more. This, combined with a higher rise ball mount worked out great. I'm very satisfied with this product.
by: Dave L.04/21/2017
I bought this swivel jack for a utility trailer. It appears very well made and works well. Excellent value.
Dave L.
4/21/2018
Have used it for a year. Still like new!
by: Lee07/14/2017
I've had this tongue jack for about a year now. There's VERY little sign of rust after being exposed to the salt air and the jack still works as new. What killed the last one was the lock pin for the swivel action was not holding properly. The swivel plates, lock pin and lock pin spring are still in excellent shape on this unit.
by: Davisele01/21/2023
The unit works great. The galvanized finishing is even & a great weather barrier from the harsh elements.
25
803
Show More Reviews
See what our Experts say about this etrailer Trailer Jack
- Swivel Jack for a Heritage Boat Trailer with a 4,000-4,500 lb. BoatFor your Heritage boat trailer with 4,000-4,500 lb. boat you can use the Round Swivel Marine Jack w/ Wheel # MJ-1200B. This swivel jack will provide you with 11" of travel and a 1,200 lb. capacity. The capacity is factored by the tongue weight, so the 1,200 lb. capacity will be more than enough for your boat trailer. This jack features a bolt-on installation with the included mounting bracket and hardware.
view full answer... - Replacement Jack for Boat Trailer with Snap-Ring Mounting BracketThe best option to install a new trailer jack on a boat trailer with existing snap-ring mounting bracket would be to go with a bolt-on option, the Round Swivel Marine Jack part # MJ-1200B. I know you want to try and reuse the existing mounting bracket but the fact of the matter is that these snap-ring mounting brackets are not universal (different sizes) and most of the older options are not available anymore.
view full answer... - Is 1,500 lb Trailer Jack Enough for 21 ft Boat TrailerTrailer jacks are rated for the amount of tongue weight that the trailer has. Typically trailer tongue weight is around 10 percent of total trailer weight. So for a 1,500 lb jack to be at capacity the trailer would most likely weigh near 15,000 lbs. So a 21 ft boat trailer would have no problem with a 1,500 lb jack capacity. Our most popular swivel jack for a boat trailer is the part # MJ-1200B which has a 1,200 lb capacity and would work well.
view full answer... - Overall Height of the Round Swivel Marine Jack w/ Wheel # MJ-1200B The overall height of the Round Swivel Marine Jack w/ Wheel # MJ-1200B is 22-3/8 inches when fully retracted. It can swivel forward or back too.
view full answer...
- 1200 Ram Trailer Jack Sidewind Handle ReplacementYes you can use the replacement handle # MJ-1000B-HD with the 1,200 lb Ram jack # MJ-1200B.
view full answer... - Bolt-On Side Mount Caster Wheel Tongue Jack to Replace Fulton 1000-lb Jack We do sell replacement jack parts including the main screw like the one shown in your photo. Examples of these replacement jack screws are # TJD-12000-RODNUT, # BD500250 and # BD500217 which are shown on the linked page. Unless you can positively identify the model of Fulton jack you have I strongly recommend replacing the whole jack instead of trying to rebuild the old one. You may even save money by getting a new jack; you'll also get a new warranty and have the confidence of knowing...
view full answer...
- Similar Version of etrailer Side Mount Jack with at Swivel and Wheel CasterThe etrailer.com jack part # MJSQ-2500B is made by RAM jacks like the jack you have now. The most similar swivel jack with a wheel caster would be the etrailer.com part # MJ-1200B which has a 1,200 lb capacity, a wheel like you want, and swivels like you want it to as well.
view full answer... - Replacement for Shelby Trailer Jack on Four Winns Boat TrailerI do have an option for you but Shelby boat trailer jacks are discontinued and we don't offer any direct bolt-on replacements for them. That said, you can easily remove the old flange by cutting or simply place the new jack beside it and leave the old flange in place. I recommend the Round Swivel Marine Jack w/ Wheel part # MJ-1200B which offers a bolt-on install with wheel for easier maneuvering.
view full answer... - Recommended Trailer Jack Compatible with Welding to Trailer FrameThe Round Swivel Marine Jack w/ Wheel - Bolt On # MJ-1200B can be welded to your trailer if you so desire. You will compromise the corrosion resistant zinc finish by doing so instead of using the included mounting brackets and hardware. I recommend painting the weld to protect the metal if you choose to install in that manner. For a better alternative, I recommend the Fulton Round Snap-Ring Swivel Marine Jack - Weld On # FTJ120W0301. It will give you the mount intended for that weld-on...
view full answer... - Replacement Jack Handle for Ram Jack with 1,200 lb CapacitySounds like the jack that you have is the Round Swivel Marine Jack w/ Wheel # MJ-1200B which is a sidewind Ram Jack with a 1,200 lb capacity. So then the correct handle you'd need is the # MJ-1000B-HD.
view full answer... - How To Replace Welded-On Trailer Tongue Jack for Boat TrailerIn order to remove a welded-on trailer tongue jack you will need to cut off the old welds to release the mounting bracket. This can be done using an angle grinder. The jack can then be replaced with another welded-on option such as the Fulton Marine Jack part # FXP100W0301. If you don't have an angle grinder or the skills to use one you can always leave the mounting bracket attached and just install a bolt-on jack in front or behind it, I recommend the Round Swivel Marine Jack part # MJ-1200B.
view full answer... - Replacement Parts for etrailer or RAM 1,200 lbs Round Swivel Marine Jack w/ WheelFor your RAM Jack # MJ-1200B, you can replace the crank handle with part # MJ-1000B-HD and the top cap with part # MJ-1000B-CP. The handle side bushing is not currently available as a replacement part.
view full answer... - Recommended Trailer Jack with Lower Retracted Height for Landscaping TrailerI looked through our selection trying to find a similar jack to the MaxxTow MT70149 with a retracted height less than 14-3/4 inches and found a couple of good options for you. You didn't say exactly what height you need, however part # MJ-1200B has a retracted height of 12-1/2 inches. The weight capacity is slightly less, at 1,200 pounds but that's probably still plenty for your trailer. It also offers 11 inches of travel which is a 1/2 inch less than the MaxxTow. A second option is...
view full answer... - Weight of Dexter Trailer Hub and Drum Assemblies and Other Trailer AccessoriesThe Dexter Trailer Hub and Drum Assembly # 84557UC3-EZ weighs 24 pounds. The Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 has a total weight of around 20 pounds. The Timbren Axle-Less Trailer Suspension System # ASR2000S02 weighs around 72 pounds total. The TruRyde EZ Lube Spindle # TRU74FR weighs 6 pounds. The etrailer.com Round Swivel Marine Jack # MJ-1200B has a weight of 15 pounds. The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 weighs in at just 1-1/2...
view full answer... - Recommended Replacement for 1998 Coleman Fleetwood WestlakeI am not aware of any such trailer jack that we offer which will reuse your existing mounting bracket as they are typically brand specific, not universal. Therefore, this bracket will need to be removed, usually by cutting, and then replaced with a bolt-on option such as the Round Swivel Marine Jack w/ Wheel part # MJ-1200B which is a great cost effective replacement option for this.
view full answer... - Replacement Jack Options For a Shelby 4587 Trailer Jack On a Boat TrailerI have a couple options for you to consider as no one makes a jack that will bolt on in place with your Shelby 4587 jack bracket you have welded to your frame. First the Round Swivel Marine Jack w/ Wheel # MJ-1200B is the closest we have to the design of your jack. This will bolt to your trailer frame either just behind your current welded jack bracket or you can have the bracket cut off and install the jack in the same place. The Xtreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels...
view full answer...
- 1,200 lb Swivel Jack Recommendation with Wheel CasterI believe the jack you are looking for a replacement for is a frame mounted, swivel jack, sidewind, that has a 1,200 lb capacity and a wheel caster. The part # MJ-1200B would be a great option that fits all of that criteria.
view full answer... - Bolt Through Swing Away Trailer Jack For Limited Space Trailer TongueThe Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs # FXP15W. This jack is 12-3/4 inches retracted and has a clearance of 12-1/2 inches from mounting bracket to top of jack. This will be the closest jack to fitting your needs. If you don't need the bolt thru style, I recommend the Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,200 lbs # MJ-1200B which is bolt on and has the 12-1/2 inch retracted length. Unfortunately there...
view full answer... - Options For A Tongue Jack With Low Retracted Height For An ATV TrailerHello George. I believe I understand what you are describing. I really cannot recommend modifying a jack in the way you described though. If you need something with a retracted height of less than 10-1/2" we do have a few options for you. One is the Square Jack w/ Footplate # MJSQ-2500B. This jack has a 7-1/4" retracted height. As far at the bolt on tongue jacks we offer, this will have the lowest clearance of all of them. The only downside is that this jack has a footplate and not a wheel....
view full answer... - Replacement Jack for 2009 Ranger Boat TrailerTrailer makers don't maintain detailed specs on items like the jacks they supply on their new trailers but we do offer many types and capacities so we'll have one that will work for you. It is best to select a jack with more capacity than you actually need; the same is true for hitches and winches. Such items, when operated below their maximum capacity, typically last longer than ones used near their limits. I linked our main page for side-frame-mount jacks. You can click on your required...
view full answer... - Recommended Light Duty Trailer Jack for 2-1/2 Inch TongueFor your light duty jack I recommend the Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,200 lbs # MJ-1200B. For your 2-1/2 inch tongue, you will need to drill additional holes in the mounting brackets to center the swivel portion of the jack, but it will work very well for your application and give you a precise fit.
view full answer... - How To Add Tongue Weight To a Small Motorcycle TrailerThe issue you are having with excess sway is pretty common on light trailers. The sway issue might then be minimized when you have your motorcycle attached but odds are you are still going to have sway issues. The overall weight of the trailer is a concern but more importantly is the tongue weight. The best option you have to decrease trailer sway with your trailer would be to add as much weight as you can to the tongue. The best way to add the most amount of weight would be to make some...
view full answer...
- Is There a Replacement for a Shelby Jack 5856A That Uses Existing BracketI do have an option for you but the Shelby trailer jack mounting bracket that you have welded to your frame won't be able to be reused with any newer jack. The Shelby trailer jacks did use similar designs in regards to mounting like the bolt-through and snap ring that some current jacks have but they are simply not cross-compatible. The bolt-through option for example from Shelby has a flat plate whereas the current models have a recessed portion. Therefore, the best option for you would...
view full answer... - Replacement for Shelby 5764A Trailer Jack on 2000 Four Winns Horizon 180Swapping the mounting hardware on a jack can be done, but it will depend on the specific mounting hardware of the jacks. Shelby jacks and parts are becoming more difficult to locate, so I would recommend replacing your Shelby hardware with something more easily replaceable in the future like the etrailer Marine Jack # MJ-1200B, which has a 1200 lb capacity and 11" lift. If you want to try to match the existing Shelby mounting plate, we do have one jack that may work. The Fulton Bolt-Thru...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Mike S
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Luke
10/6/2023
The hitch receiver has been great for my application. DIY installation was easier than expected! Quality is holding up well! Recommend!