bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Swivel Jack
Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs

Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs

Item # FXP15
Retail:$168.75
Our Price: $108.73
You Save: $60.02
Trailer Jack
Shipping Weight: 19 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
With 1,500 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this bolt-on swivel jack is perfect for lightweight marine applications. Has 12-1/2" of clearance above your trailer frame and 15-1/2" retracted height. Great Prices for the best trailer jack from Fulton. Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs part number FXP15 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (755)
  • Q & A (0)
  • Photos

Fulton Trailer Jack - FXP15

  • Boat Trailer
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Bolt-On
  • Leveling Jacks
  • Tongue Jacks
  • 10 Inch Lift
  • With Wheel
  • Steel
  • Fulton

With 1,500 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this bolt-on swivel jack is perfect for lightweight marine applications. Has 12-1/2" of clearance above your trailer frame and 15-1/2" retracted height.


Features:

  • Ideal for marine and recreational use
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Z-Max 600 zinc finish provides superior corrosion resistance
    • 600-Hour salt spray rating is about 30% more corrosion resistant than Dacromet
  • Bolt-Thru mount provides minimum deflection and maximum support
    • 3-D Formed, heavy-gauge steel stampings
    • Proprietary bushing material
  • Heavy-gauge steel construction
  • Sidewind crank handle
  • Thermoplastic wheel and mounting bracket included


Specs:

  • Application: 3" x 3" or 3" x 4" trailer frames
  • Bracket height:
    • 15-1/2" Retracted
    • 25-1/2" Extended
  • Lift: 10"
  • Clearance: 12-1/2" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 8"
  • Lift capacity: 1,500 lbs
  • Uses an 8 pitch acme screw
    • Takes 8 turns of the handle to raise or lower the jack an inch
  • Limited 5-year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



XP15 0101 Fulton Marine and Recreational Bolt-Thru Swivel Jack, Sidewind, 10" Travel, 1,500 lbs




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs - FXP15

Average Customer Rating:  4.8 out of 5 stars   (755 Customer Reviews)

With 1,500 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this bolt-on swivel jack is perfect for lightweight marine applications. Has 12-1/2" of clearance above your trailer frame and 15-1/2" retracted height.

by:

Very nice quality, well made, heavy duty jack for my 22’ bay boat trailer. Large wheel rolls easily. Easy installation.



by:

The product seems good quality however the Shipping was not so good. The box that the Fulton Marine Jack came was ripped apart by the freight company during shipping. Not happy with the way it came in.

Etrailer Expert

Jenny N.

2/7/2022

I will have our customer service team reach out to you.



by:

Great service with fast shipping Correct parts the first time and fit perfectly



by:

The hitch jack attached easily and now I can move my teardrop camper around with ease.

Kani

5/21/2023

It works great allowing nw to easily move my small trailer around by hand.



by:

This is a very sturdy trailer tongue jack that does its job well. The second most important feature isn't yet knowable, that being it's ability to resist corrosion in a saltwater setting, but the presence of a grease nipple fitting will make it easier to maintain.



by:

I had ordered a trailer jack from another company. I needed it for my boat trailer. I called the company 3 days later to check on delivery date. I was told it was cancelled and I had been sent an email to the fact. I told them No one had told me and I was in a mess because of a fishing tournament this weekend. I was told they could not help. At this point I looked up Fulton Jacks and found etrailer.I had never heard of this company but decided to call them. I dialed the # and a "very nice" lady answered and wanted to know how she could help. I gave her my order and paid for 2 day delivery. She said she would take the order to shipping Dept. as soon as she hung up. In 2 days I had my jack-installed and on the water. I know who etrailer is and their Great Employee PAT Is and will tell my fishing buddies! It is hard to find a company and employee who give this great service! Thanks Pat for great service, tracking info and delivery on time. I am a happy camper and will think of you guys first next time.

Frank F.

5/23/2018

Jack doing great. Thanks for following up. I was in sales for 40 years and service and product knowledge is still tops. Hope that never changes. Price is not my number 1 concern.



by:

This jack replaced an old Fulton. Well made product and the installation was easy! As always, the shipping was fast.

Al A.

8/9/2021

Very heavy duty product. Working great!



by:

Since knowing upfront from the beginning,that when I ordered my utility trailer,I wanted without a jack installed. I knew prior to this etrailers jacks,Jack's, quality of them,the excellent customer service,I knew my experience ordering was going to be awesome..In which it was..Was immediately informed my order was received, and tracking information to follow, with customer services telephone number..Received jack promptly, and in undamaged. Reviews don't lie,and peps,u can't go wrong dealing with etrailer. I 100% recommend.. off the front of my trailer,there is etrack single mounts,in which I have down both sides of my trailer,in which with etrack loop hooks,gives me extra tie off points.Cant never have enough security tie offs.Stay strong America.



by:

Not only is the quality great,, but etrailer has enough description about the product, that I was sure it would fit when I got it.
Excellant service too!!

Bill L.

9/1/2018

Every thing is working just great. I purchased these items so that I could tow my boat with my Sienna van. All the items fit perfectly and are preforming as I had hoped. Thanks



by:

I am entirely satisfied with my purchase! I can now maneuver my trailer around even with a full load prior to hitching up to my car. No more lifting!! I only wish that I had bought it 5 years sooner! Well worth the price.



by:

I have purchased from your company before. I have three trailers total and have bought the bolt on trailer jacks which enables the ease with which we can move the trailers around. The communication from your staff is always fast and comprehensive and I have never had any produce fail . I am a happy customer of etrailer! Debbie D



by:

Order product, had in 2 days. Pulled out of box and had it easily installed in about 10 minutes. Product was very heavy duty and a nice upgraded to an old weld-on jack that I had to cut off my boat. The bolt on was nice since I do not know how to weld and it seems very sturdy for a 24' pontoon trailer.



by:

Great product and most of all fantastic customer service. Thanks Suzanne. You did a wonderful job answering all of my questions and researching the product for me to make sure it was the right purchase.



by:

Super-fast fairly-priced shipping product is outstanding. No issues at all I have it installed now and it looks perfect.



by:

You get what you pay for. Well made product. Puts my factory trailer jack to shame.



by:

Very prompt service and great people to work with! Parts are great quality and no hassles if you have to return a part!



by:

East to install. Works great after a season. No corrosion from being outside for the winter.



by:

Thank you for your advise and excellent service. The product was delivered on time.



by:

I received exactly what I ordered on the exact delivery date at a reasonable cost. The online tutorials are great.



by:

Fit just like specs predicted thanks to your great on line explanations . a very sturdy jack ! thank you !



by:

Substantially built. Very nice piece of machinery.



by:

This company is excellent to work with. They really want and appreciate your business. Very polite and eager to please.



by:

Very employee you deal with here is great. Love doing business with ya’s.



by:

It looks great and works great.



by:

Good Product and good price. Fast Shipp ing.


25
755
Show More Reviews

See what our Experts say about this Fulton Trailer Jack

  • Is There a Bolt-On Replacement for Old Shelby Weld-On Trailer Jack
    I do have an option for you but if it's an old Shelby Trailer Jack with welded-on bracket then you'll be better off removing the jack, leaving the welded-on bracket in place, and attaching a bolt-on jack like the Fulton Bolt-Thru Swivel Marine Jack part # FXP15. Shelby Jacks are discontinued and there are no longer any direct bolt-on replacements for their brackets that I am aware of.
    view full answer...
  • Is the Mounting Bracket Included with the Fulton Bolt-Thru Swivel Marine Jack Part # FXP10W0301
    The Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 does not come with the bolt-thru swivel bracket you will need to attach it to the trailer. For this, you can use the part # P9012-00. The plate that you are referring to will attach to the above bracket. As you mentioned, you will need to cut/grind the old bracket off and weld the new one on in order to use this jack. I have attached a review video of the jack for you as well.
    view full answer...
  • Is Mounting Bracket of Fulton Jack FXP10 and FXP15 the Same
    Yes, the mounting brackets are the same between the Fulton jacks part # FXP10 and # FXP15 that you mentioned.
    view full answer...
  • How is Height Measured For Side Frame Mount Trailer Jack
    Good question, and the height of a side frame mount trailer jack is measured from the very bottom of the jack to the middle of the mounting bracket. So for example, the Fulton Bolt-Thru Swivel Marine Jack # FXP15 has a retracted height of 15-1/2 inches and extended height of 25-1/2 inches for 10 inches of lift. I have added a link below to our entire selection of side-frame mount jacks for you, or if you let me know the height you need I can make a recommendation for you.
    view full answer...
  • Differences Between The Fulton F2 And Bolt-Thru Trailer Jack
    In order to recommend an exact fit replacement boat jack for your 2007 Mastercraft single axle trailer, I would need to know the dimension of the bracket you have welded onto your trailer. In order for the Fulton F2 Swing-Up Trailer Jack part # F1413140334 to fit on the trailer, you would need a bracket with dimensions of 4-1/2" from the horizontal bolt holes and 3-7/8" from the vertical bolt holes. If you do not have these dimensions and would still like to use this jack, you will need...
    view full answer...
  • Can I Replace My Trailer Jack With A Jack That Has a Wheel
    The Fulton Bolt-Thru Swivel Marine Jack # FXP15 will be the replacement part you are looking for. It has a wheel and will fit the same bracket that you now have installed on your trailer. Please note that the Bulldog Trailer Jack # BD154107 that you mentioned has a lift capacity of 2,000 lbs, while the Fulton Bolt-Thru # FXP15 has a lift capacity of 1,500 lbs. You will want to make sure that you don't go over this limit while using this jack.
    view full answer...
  • Trailer Jack Recommendation for 25 Foot Roadrunner Trailer with a 7,000 Pound Boat
    If your boat and trailer together weigh 7,000 pounds, that could mean you have a tongue weight over 1,000 pounds. In this scenario, I would not recommend the Fulton Snap-Ring Swivel Marine Jack, # FEJ1000, as it has a max capacity of 1,000 pounds. Instead I would go with the next step up to be on the safe side. Take a look at the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10 inch Lift - 1,200 lbs, # FXP10. This is very similar to the jack you referenced but it has a capacity...
    view full answer...
  • Recommended Replacement Jack for 2006 Trailmaster Fulton 1,200lbs Magnum Jack
    Thanks for including your picture of the jack, it helped a lot. The Magnum series jacks have been discontinued and unfortunately there are no direct replacements so that you can use the remaining bracket, but I do have a solution for your 2006 Trailmaster. If you wanted to get the Fulton # FXP15W you would need the # P9012-00 weld-on mounting bracket. Another great option, if you don't want to hassle with removing your current bracket is to get a bolt-on jack like the # FXP15 and find...
    view full answer...
    Image 1 for
  • Recommended Replacement Jack & Wheel For 1962 Aristocrat Travel Trailer
    For your replacement trailer jack, I recommend the Pro Series Round, A-Frame Jack w/ External Gearbox - Sidewind - 14" Lift - 2,000 lbs # PSRV20000103. I recommend using the Ram Removable, 6" Poly Caster Assembly for 2" Jack Tube # JC-101 with this to give you the wheel you are currently missing as well, but that won't give you much clearance for travel when it is installed, so I recommend removing it for towing. This is easy with the included pin and clip. Another option is to change...
    view full answer...
    Image 1 for
  • Differences Between Fulton Jacks # FXP10 and # FXP15
    The Fulton Jack part # FXP10 does have a 6 inch wheel and a 1,200 lb capacity whereas the # FXP15 has an 8 inch diameter wheel and a 1,500 lb capacity. Aside from that they are very similar. They use the same mounting brackets and same sidewind crank. They both do have a retracted height of 12-3/4 inches.
    view full answer...
  • Bolt-On Trailer Jack that Will fit a 1-3/4 Inch by 4 Inch Trailer Frame
    For the 1-3/4 inch wide by 4 inch tall trailer frame I recommend Fulton Bolt-Thru bolt-on jack # FXPD15L. This jack has a 1,500 pound capacity, dual wheels, and a zinc finish to resist corrosion. I have included a link to a video review of this jack for you.
    view full answer...
  • Replacement Bolt-Thru Swivel Trailer Jack for 7,000 lb Trailer
    For a 7,000 lb trailer you need a jack that can handle at least 1,050 lbs (going by the 10% - 15% tongue weight rule). From what I can tell in your photo I believe the 1,500 lb Fulton Bolt-Thru Swivel Marine Jack # FXP15 will match up to your mounting bracket, and this jack offers a 10" lift if that works out for your trailering application. You just need to ditch the included mounting hardware and fit it to the welded-on bracket currently on your trailer. Attached are some photos showing...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Will Fulton FXP15 Fit 2" x 4" Frame On 2008 E Z Trailer?
    Yes. While the Fulton # FXP15 was designed for a 3" x 3" or 3" x 4" frame, the included hardware has enough threads to allow you to secure it to the 2" x 4" frame on your 2008 E Z trailer.
    view full answer...
  • Fulton Magnum 1,200 lb Swivel Jack Replacement
    I spoke with my contact at Fulton and if your current jack pivots on a 1/2" bolt then you can use either part # FXP10 for a 1,200 lb option or part # FXP15 if you wanted a 1,500 lb option. These come with a bolt on bracket that can fit a 3" x 5" trailer frame that you can either choose to use for mounting in place of your current mounting option or you can disregard the bolt on bracket and they will fit directly to your current bracket. Demonstration videos have been linked for you to...
    view full answer...
    Image 1 for
  • Recommendation For Trailer Jack To Fit a 3 Inch Wide and 5 Inch Tall Aluminum I-Beam Trailer Frame
    I would recommend to use the correct trailer jack for the 3 x 5 inch trailer frame, instead of trying to modify something to work. The Fulton F2 Trailer Jack, part # F1413130334, that you have referenced is designed for 3 x 5 inch trailer frames. The Fulton Trailer Jack, part # FXP15, with a single wheel and the Fulton Trailer Jack, part # FXPD15L, with the dual wheels are both rated at 1,500 lbs. They are both designed to bolt-on to a 3 x 5 inch frame. It would work fine on your aluminum...
    view full answer...
  • What are the Inner and Outer Leg Diameters for Fulton Bolt-Thru Swivel Marine Jack FXP15
    When you see inner tube diameter and outer tube diameter on a trailer jack product page it refers to the outer diameter of either the inner leg or outer leg. So on jack # FXP15 for example the inner leg, the one that actually moves up and down, has an outer diameter of 2 inches. The fixed outer leg has an outer diameter of 2-1/4 inches. If you need the cap for this jack it is # F500324. If you have a different jack let me know what it is and I can determine the correct cap if it is available.
    view full answer...
  • Availability of a 1500 lb Capacity Bolt On Swivel Trailer Jack - Fits 5-1/2 x 3 Inch Trailer Tongue
    None of our bolt on jacks that meet your specifications would work on a 5-1/2 inch tall trailer tongue, all the bolt on offerings fit trailer tongues up to 5 inches tall. Your best bet would be to go with a weld-on application, like the Fulton # FXP15W. The weld-on bracket is sold separately as part # P9012-00.
    view full answer...
  • Replacement Swivel Jack for Boat Trailer with Welded On Bracket
    I do have an option for you but the reason the old owner just used a clamp-on is because a lot of the old weld-on trailer swivel jacks were made by Shelby who is no longer in business and no ones makes a direct replacement for the welded on bracket that I am aware of. Therefore, simply adding a new bolt-on jack is much easier than grinding off the old bracket and welding a new one on. I recommend the Fulton Bolt-Thru Swivel Marine Jack part # FXP15.
    view full answer...
  • Bolt-On Trailer Swivel jack that Mounts to a Trailer Using 1 Center Bolt
    The Fulton jack # FXP15, is not meant to be mounted through the center bolt. It is designed to use the included mounting hardware that fits around the trailer frame. This will allow it to operate correctly and support the weight it is rated for (1,500 pounds). You can use the Fulton jack, # FXP15W. This unit requires a mounting plate, # P9012-00, that welds to the trailer frame.
    view full answer...
  • Compatibility of Fulton FXP15 Trailer Jack with 3 x 2 Inch Trailer Frame
    The Fulton # FXP15 will indeed be compatible with a 3 x 2 inch trailer frame member. I've confirmed this with my Fulton representative.
    view full answer...
  • LED Trailer Lighting and Tongue Jack for Trailstar Trailer
    LED type lighting is a great way to update your trailer to both increase light output and reduce power demands on your tow vehicle's wiring. LEDs use about 1/10th the power of standard incandescent bulbs and they do not require periodic bulb replacement. You can use the link provided to see all of our LED trailer lighting items. Simply click on the filters to see specific types, shapes, colors, etc. The Trailstar website shows round amber marker lights on most of its trailers. For example,...
    view full answer...
  • Is the Mounting Pattern for the Fulton Jacks FXP15 and FXP10 the Same
    Yes, the mounting hardware between the Fulton Jacks # FXP10 and # FXP15 are the exact same.
    view full answer...
  • Recommended Replacement Fulton Jack With 1,200 Pounds Of Capacity
    This is actually something that has come up before. Fulton will typically only list the jack's capacity on the jack, but not a part or model number. Since you found the 1,200 pound capacity, measured it at 16", and mentioned it being a bolt though style, the closest we currently have will be the Fulton Bolt-Thru Swivel Marine Jack # FXP15. This will be slightly shorter at 15-1/2" when retracted, but will have a slightly higher capacity at 1,500 pounds. This also includes all the hardware...
    view full answer...
  • Recommended Replacement Swivel Jack with 10 Inch Lift and Bolt-On Attachment
    Atwood has been bought out and is no longer making the jacks. For your replacement, I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15W. This will come with the wheel, the 10 inches for lift and will bolt into place on your trailer to the welded plate. I've attached a video to assist. If you don't have a plate on your trailer, then # FXP15 will also include the bracket to mount.
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Ryan F
Updated by:
Ryan F
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.