Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks
(32 reviews)
Price: $23.27
In Stock
Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks
Item # F500349
Retail:$29.97
Our Price: $23.27
You Save: 22%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (32)
- Q & A (0)
- Videos (1)
- Photos
Fulton Accessories and Parts - F500349
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Fulton
Replaces the bolt-on mounting bracket and hardware for your Fulton XP Series jack (FXP15L or FXP15W). Includes bracket, bolt, nut, and washer.
Features:
- Replaces the bolt-on mounting bracket and hardware for your Fulton XP Series jack (FXP15L or FXP15W)
- Includes bracket, bolt, nut, and washer
500349 Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks
California residents: click here
Video of Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Fulton Replacement Bolt On Mounting Kit XP Series - F500349
Hi everybody. Andy here with etrailer.com. Let's take a look at this Fulton Replacement Bolt-On Mounting Kit. This is going to replace the bolt-on mounting bracket and hardware for your Fulton XP Series Jack. And on your screen, I am including the model numbers of the Fulton XB Series Jacks, that this is going to fit and work with. And it includes everything that you see here on the table before me, you're going to get this bracket, the bolt and the nut and washer.
And on your screen just to give you the further confirmation that this is going to work for you, I am including some measurements of the spacing of the bolt holes. Again, just so you can be confident that this is what you are going to need. And this is the direct replacement from Fulton so you can have the confidence that this is going to fit right in place of your original bolt-on mounting kit. You're not gonna have to worry about compatibility issues, fitment issues, or anything like that. So if you are needing to replace the bolt-on mounting bracket and hardware for your XP series jacks this is going to be exactly what you need.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks - F500349
Average Customer Rating: 4.7 out of 5 stars (32 Customer Reviews)
Replaces the bolt-on mounting bracket and hardware for your Fulton XP Series jack (FXP15L or FXP15W). Includes bracket, bolt, nut, and washer.by: Daniel07/25/2018
This mounting plate worked great. I needed it when I replaced the jack on my boat trailer.
by: Gary 08/25/2023
Received exactly what I ordered in a very timely manner
by: David 06/29/2022
THIS WAS A PART I NEEDED TO COMPLETE THE REPLACEMENT OF MY TRAILER JACK. I’M CERTAINLY HAPPY THAT ETRAILER CARRIED THIS PART. IT ARRIVED SOON AFTER ORDERING AND A WAS A PERFECT FIT TO THE JACK I BOUGHT FROM ETRAILER ALSO.
by: Paul12/09/2021
it is just an average quality part
by: Benjamin11/21/2020
I attempted to replace a bolt-on mount for a 2000 Champion boat trailer. This trailer came stock with the Fulton trailer jack. This was the closest to the measured mount holes available. I still needed to modify it with new bolt/mount holes. I also dislike the slop/wiggle at the pivot point. To me it appears to need a washer or shim.
by: Chad 03/19/2023
Holding up well. Still looks great!
by: Dale E.05/27/2022
I needed this mounting bracket to attach my Bulldog swivel jack to my cargo trailer. It works as intended.
by: Barrows Henken Racing05/28/2021
Purchased as a replacement for my Olympic Sailing Trailer and has been working really well so far!
by: Jaime11/03/2018
I love this accessory in allowed me to use my favorite Jack on another trailer
by: Peter 12/10/2022
Well made, and delivery was going to be late, but they let me know immediately and offered and alternative piece that was in stock. Will defiantly use them again
by: Robert 01/17/2021
Excellent replacement piece
by: Thomas 10/06/2021
good quality item if ever I would need to replace would buy again but the way it stands up I don't think I'll be needing to replace for quite sometime
by: Don09/01/2020
Excellent service. Part worked as advertised. Good value.
by: Darrin04/19/2019
Excellent product !!!
Strong heavy duty...
Worked great ....
Delivery was in a few days as described...
Will order more products from these guys !!!
by: Paweå‚12/05/2021
Super
by: Jeff 03/05/2024
by: Ann Onymous04/29/2022
product was as expected.
by: Brad01/16/2017
Just what i needed.
by: Brigitte09/04/2019
JUST AS ADVERTISED
QUICKLY SHIPPED
by: Steven04/05/2022
QUICK SHIPPING
by: Jake 08/08/2020
Great experience with my order.
by: Wayne04/08/2019
very fast delivery time thanks
by: Michael 09/16/2023
by: Mark 11/18/2021
by: Adam 05/25/2023
25
32
Show More Reviews
See what our Experts say about this Fulton Accessories and Parts
- Replacement Trailer Jack for 2002 Shelby Boat Trailer with Single Bolt InstallationIt sounds like you're needing a jack like the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 which installs on trailers that already have the mount welded on with a single bolt attachment for the jack itself (like what we see with part # F500349). The head of the bolt should be welded onto the jack you just just have to remove the nut and washer to remove the old jack, and then reverse the steps to install this new one. Attached is a review video for you to check out!
view full answer... - Can The Bulldog Round, Bolt-Thru Swivel Jack # BD154102 be Bolted OnIf you used the Bulldog Round, Bolt-Thru Swivel Jack # BD154102 with the bolt on bracket # F500349 it would be considered a bolt on application. You'd also need the part # F500286 to complete the install.
view full answer... - Mounting Plate Needed to Mount Fulton Jack on TrailerI have attached a link to our selection of available Fulton mounting brackets for you to filter through. Among them is the mounting kit # F500349 which may be what you are talking about. Since I am not sure what Fulton jack you have or exactly how it installs on your trailer, if none of these parts are what you are looking for please send me a picture or a part number for your jack so I can see what we have available.
view full answer... - Hardware to Attach Fulton Bolt-Thru Swivel Marine JackIn regards to mounting the Fulton Bolt-Thru Swivel Marine Jack part # F1411300301 you'll need a mounting kit like the Bolt-On Mounting Kit for Fulton part # F500349 which contains the mount and the center bolt, nut, and tapered spacer. The only other thing you'll need are u-bolts. I have attached a photo below of the kit components which contains the tapered spacer.
view full answer...
- Bolt Hole Pattern of Replacement Bolt-On Mounting KitThe bolt holes of the Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks # F500349 measure 3" apart on center in order to line up with the Jack Mounting Bracket # P9012-00.
view full answer... - Finding The Correct Replacement Bolt-On Mounting Kit For A 2002 Boatmate TrailerWe do have plenty of replacement mounting hardware for the jack on your 2002 Boatmate Trailer like the Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks # F500349, however in order to find the correct replacement I would need to know what trailer jack you currently have. From here I would be more than happy to help you find what you're looking for.
view full answer... - Can The Bulldog Trailer Jack BD154102 Be Bolted To 3" x 5" Trailer Frame?Yes, The Bulldog Round, Bolt-Thru Swivel Jack # BD154102 you were looking at can indeed be bolted on to your 3" x 5" trailer frame by using the Replacement Mounting Plate # F500349 and Replacement Mounting Hardware # F500286. This jack has a 2000lb capacity and will be a nice, strong upgrade over your current 1200lb jack that is not cutting it. I included a video of the # BD154102 for you to take a look at.
view full answer... - How To Bolt-On the Bulldog Round, Bolt-Thru Swivel Jack To a Trailer FrameThe Bulldog Round, Bolt-Thru Swivel Jack part # BD154102 can be used with the Bolt-On Mounting Kit part # F500349 and Mounting Hardware part # F500286 to attach to a trailer frame without welding.
view full answer... - Replacement Jack Compatible with Welded Jack Plate on Ranger Boat TrailerFor your welded plate, the Replacement Bolt-On Mounting Kit for Fulton XP Series Jack # F500349 sounds like what you are describing but it isn't a welded plate. If that is similar to what you have, then I recommend the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301. The center bolt is the style that many jacks will work with. If you have this, then this will be a good fit. If that isn't what you have then the snap ring jack like the Fulton...
view full answer... - Dimensions for Fulton Replacement Bolt-On Mounting Kit # F500349I went out to our warehouse to take a look at the Fulton Replacement Bolt-On Mounting Kit # F500349 referenced in your question. I measured a distance between the two outside bolt holes, horizontally, of right at 5-1/2 inches. Vertically the distance between two bolt holes is 1 inch and the distance between the top and bottom holes is just under 4-1/2 inches (4-7/16 inches to be exact). I have attached an image with these dimensions labeled that you can also check out.
view full answer...
- Bolt On Mounting Bracket & Hardware Needed To Mount Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301You will be able to use the Bolt-On Mounting Kit # F500349 with the Mounting Hardware # F500286 to bolt on the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301.
view full answer... - How To Bolt-On Bulldog Round, Bolt-Thru 2K Swivel JackThe Bulldog Round, Bolt-Thru Swivel Jack part # BD154102 can be bolted to a trailer frame when using the Replacement Bolt-On Mounting Kit part # F500349 and Replacement Mounting Hardware part # F500286. There's also an option of the Fulton F2 Swing-Up Jack part # F1413230134 which doesn't have as many parts.
view full answer... - Does the Replacement Bolt-On Mounting Kit for Fulton XP Jacks Come with U-BoltsThe # F500349 Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks comes with a single bolt, nut and washer for the center attachment point. There are no U-bolts included in this kit. If you are looking for the mounting hardware used with the Fulton XP Series Jack, the # F500286 Replacement Mounting Hardware for Fulton Jacks is what you need. I have attached a review and installation video showing the mounting hardware in use to mount the jack to the trailer that you may reference.
view full answer... - Mounting Plate Recommendation for Fulton XP Trailer JackThe picture you submitted looks like the mount of a Fulton XP jack part # FXP15W. Which if you are looking for a replacement mount you'd want the part # F500349.
view full answer...
- What Are The Dimensions Of The Replacement Bolt-On Mounting Bracket For Fulton XP Series JacksI went out to our warehouse and measured the 4 holes in the center of the Replacement Bolt-On Mounting Bracket for Fulton XP Series Jacks # F500349, and they measure 3" on center left and right, and 3" on center up and down. The remainder of the bracket measures, 5-1/2" from the furthest left and right holes, 4-7/16" from the outer holes up and down, and 2-1/2" for the inside holes in between the outer holes.
view full answer...
- Mounting Bracket Recommendation to Attach Fulton Jack # F500349 to TrailerThe correct mount for use with the Fulton jack # F500349 that you referenced is the part # P9012-00. You'd need to remove the bracket you have on your trailer and have this one welded in it's place.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Written by:
Wilson B
Updated by:
Alexander C
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Paul
12/10/2022
It is still working fine. Over time, the nut tends to loosen with the raising and lowering of the jack. For the price it is still a good buy.