Fulton Bolt-Thru Swivel Boat Trailer Jack w 2 Wheels - Bolt On - Sidewind - 12" Lift - 1.5K
(756 reviews)
Price: $163.37
In Stock
Fulton Bolt-Thru Swivel Boat Trailer Jack w 2 Wheels - Bolt On - Sidewind - 12" Lift - 1.5K
Item # F27CR
Retail:$218.75
Our Price: $163.37
You Save: $55.38
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (756)
- Q & A (0)
- Photos
Fulton Trailer Jack - F27CR
- Boat Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 12 Inch Lift
- With Wheel
- Steel
- Fulton
Get more traction and stability on uneven ground than one-wheel alternatives. Dually wheelbase swivels 360 degrees. 12-1/2" of clearance above the trailer frame and sidewind crank. Black powder coat is rust and corrosion resistant.
Features:
- Swings up and down smoothly
- J-bolt handle lets you position jack quickly
- Specially-designed bushing ensures consistent pivoting over time
- More stable and easier to move than single-wheel designs
- Dual caster wheels let you easily move your trailer through rocks, gravel, or soft ground
- Offset positioning helps pull in the direction you want to go - no fighting to push it
- Wheelbase turns a full 360 degrees
- Resists bending and bowing under heavy loads
- Heavy-gauge steel tubing
- Stamped steel bracket is stronger than typical snap rings
- Corrosion-resistant black powder coat finish
- Sidewind hand crank is actually comfortable to use
- Avoids winch posts, tool boxes, or other accessories mounted on your trailer
- Grease zerk allows for easy maintenance
- Bolt-on installation
- Includes wheels, mounting bracket, and hardware
Specs:
- Application: 3" x 3", 3" x 4", or 3" x 4-1/2" trailer frame
- Lift capacity: 1,500 lbs
- Total lift: 12"
- Screw travel : 12"
- Bracket height:
- 12-3/4" Retracted
- 24-3/4" Extended
- Clearance: 12-1/2" from mounting bracket to top of jack
- Inner tube diameter: 2"
- Outer tube diameter: 2-1/4"
- Pull pin diameter: 1/2"
- Wheel diameter: 6"
- Limited 5-year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack lifts your trailer tongue high enough to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your Gross Trailer Weight. For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. For this to work, you'd need a jack strong enough to lift a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, this should operate more efficiently, allowing you to spend less time cranking and more time camping.
XPD15L 0126 Fulton Marine and Recreational Bolt-Thru Swivel Jack, Sidewind, 12" Travel, 1,500 lbs
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Manufacturer issue
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Fulton Bolt-Thru Swivel Boat Trailer Jack w 2 Wheels - Bolt On - Sidewind - 12" Lift - 1.5K - F27CR
Average Customer Rating: 4.8 out of 5 stars (756 Customer Reviews)
Get more traction and stability on uneven ground than one-wheel alternatives. Dually wheelbase swivels 360 degrees. 12-1/2" of clearance above the trailer frame and sidewind crank. Black powder coat is rust and corrosion resistant.by: Ryan10/17/2023
Replaced a single wheel 1000 lb jack that was cheaply riveted and had play. I was unable to move my 19’ bass boat around on smooth concrete. The Fulton double wheel is smooth and solid. Painted black to match the boat and a zerk fitting as well. Perfect upgrade.
by: B Schmidt04/04/2024
A fantastic replacement for my OEM, single wheel, lower weight class jack!
by: 12/16/2023
Old Fulton Jack broke and I wanted a better stronger replacement that would bolt onto welded/painted trailer bracket. Found this and it bolted right on to original bracket with single center bolt.
by: Robert 03/01/2023
Typical Fulton quality. Looks Great and I expect it will perform well for years to come.
by: Bruno 07/31/2023
Well so far this swivel jack is the best I have purchased so far. It has a grease fitting, super sturdy, easy to crank.
by: Melissa 03/28/2024
Havent installed this yet - but feels really heavy and tough.
by: Jose 03/28/2024
Looks awesome and it arrived fast
by: Drew 07/14/2023
A big improvement over my old jack. Makes my boat a lot easier to move.
by: Mike 01/28/2023
big improvement over the OEM jack. This one has the zert fitting included and is heavy duty. Product was shipped and received per notice. This jack will last for a long time.
by: Grant 06/22/2023
Had to crank my old jack with 2 hands. This jack is almost effortless with 1. Definitely recommend.
by: Homer 06/07/2023
Worked perfect , extremely quick shipping and excellent quality , also customer follow up was really nice !
by: Norm 09/25/2021
my recent purchase of a Fulton trailer jack is I believe the third purchase that I have made with E Trailer and, as I was on the first two, I am very happy with the results. great fast shipping, and great follow through from the beginning of the order to after receipt.
by: Brian 07/28/2022
Installed yesterday! Jack works amazing! Best trailer jack I’ve ever owned and seems to be very well made.
by: Jeff10/03/2022
Well made product. Was easy to install
by: Paul 08/19/2022
Sturdy and strong! The hard plastic wheels are fine on pavement but not useful on gravel or dirt.
by: Jeremy 10/31/2022
Jeremy
11/1/2023
After using this Jack for the past year I can say it was a smart purchase. The dual wheel setup is robust and instills confidence. The spring locking mechanism works as advertised and spins up and out of the way easily. The jack itself handles the load with little effort and it still looks new. Should have replaced the old bent up jack sooner.
Mike L.
11/15/2023
@Jeremy We're delighted to hear your new # F27CR trailer jack is working well for you!
by: Josh08/01/2022
It's very hard for me to review the jack because I just got it and it's still in the box but thanks for your interest. I will say that it seems fairly heavy so that's a plus
by: Kevin 08/22/2022
Very sturdy!
by: Anthony 07/22/2022
Much better jack than a chain store has to offer. A lot easier to operate. Thanks
by: Douglas 07/14/2022
Exactly what I was looking for fair price and good delivery time . Thank
by: Alvin04/25/2022
Excellent service fast shipping communication was terrific. The website is easy to navigate and has all the information available to make a educated decision for your needs. Thank you
by: Michael 07/15/2022
Quick delivery. Great product. High qua lity
by: Kevin W11/22/2022
Awsem
by: Thomas 05/06/2024
by: Charles 09/23/2021
I really like the double wheels.
25
755
Show More Reviews
See what our Experts say about this Fulton Trailer Jack
- Recommended Boat Trailer Jack To Replace Damaged Wesbar Model 9500 JackI have a replacement jack option for you, but unfortunately there are no replacement parts available for your Wesbar Model 9500 Jack on your 1979 Aristocraft boat trailer. Instead I recommend replacing it with the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR which bolts on to boat trailer frames measuring up to 3" x 5", and has a 1500lb weight capacity which will be perfect for your trailer. The dual wheels on this jack make it very easy to move around your trailer. I...
view full answer... - Replacement Trailer Jack Recommendation For An Older Extreme Off-Road Trailer JackI took a look at your Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels # ORJW750BD, and since the wheels are not available as a replacement, your best option is for a full replacement. If you're interested, the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR is a great upgrade option. This jack has a overall capacity of 1,500lbs, has an integrated pull pin to allow this jack to be easily swiveled into position, and has twin track wheels that roll independently for ease...
view full answer... - Does The Fulton Swivel Jack F27CR Include All Hardware Needed For MountingWhen it comes to The Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - Black - 12 inch Lift - 1,500 pounds # F27CR the mounting bracket is included. This jack will fit applications with a: 3 inch by 3 inch 3 inch by 4 inch 3 inch by 5 inch The bracket height is 12-3/4 inches retracted, and 24-3/4 inches extended. It has a lift capacity of 1,500 pounds and has a clearance of 12-1/2 inches from mounting bracket to the top of jack. It is made from a heavy-gauge steel. I...
view full answer... - Can Wheel Fit on Bulldog 2K Sidewind Frame-Mounted JackHi! Some snap-ring jacks have a removable foot but if yours is the same model as the Bulldog Round, Snap-Ring Swivel Jack # BD151159 then the jack foot cannot be removed and we'll have to look at another solution. Since this is the case I recommend replacing your jack with the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR. This is rated for 1,500 lbs, has a bolt-on installation, and comes with the dual wheels so it's easier to maneuver the trailer tongue. Attached is a...
view full answer... - Specs for Mounting Bolts for Fulton Bolt-Thru Swivel Marine Jack with Dual WheelsThe bolts used in the mounting hardware for the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR measure 3/8-16 X 4.0" so the lock nuts will be 3/8-16, and then these are 5 Grade bolts. Attached is a review video for you to check out.
view full answer... - Replacement Bolt-On Swivel Jack For Boat TrailerI could not find anything specific to that part number, and Shelby is long out of business but for a bolt-on swivel jack there are a couple of options that will work for you, so long as you have a 3" x 3", 3" x 4", or 3" x 5" trailer frame. They are Fulton jacks with dual wheels for easier maneuverability, swing up to stow when you are traveling, and work with tongue weights up to 1,500 lbs: - Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Black # F27CR - Fulton Bolt-Thru Swivel...
view full answer... - Replacement for Dutton Lainson Jack on 2008 Ranger 621 Boat TrailerFor a replacement jack I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXPD15L. This has a 1,500 lb lift capacity and the dual wheels you're looking for. The jack has a bolt-on installation and fits frames up to 3" x 5". The Z-Max 600 zinc finish gives you a 600 hour salt spray rating and it comes with a limited 5-year warranty. It also comes in black # F27CR but with a powder coat finish instead of the zinc.
view full answer... - Mounting the Fulton F2 Trailer JackThanks for the photo. The Fulton F2 jacks use a different mount so it isn't compatible with your current base. You will need to remove the base and then you can install the F2 # F1413040134 you referenced. This F2 will come with all new mounting hardware. If you want to keep your current mount, then I recommend the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - Black - 12" Lift - 1,500 lbs # F27CR which is the closest compatible option.
view full answer...
- Replacement Upgraded Jack For Shelby 5856A-24Z Trailer Jack Rated for 1,250LBSAs Shelby jacks are obsolete you are going to need to completely replace your jack and the mount. I recommend the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR. This jack will bolt around your frame 3"-5" tall and features a 1,500lb capacity.
view full answer... - Recommended Jack With Wheels for a Demco Kar KaddyI contacted Demco and their Wheel Jack for Kar Kaddy Tow Dollies # DM11683 will have a maximum capacity of a little over 100 pounds. This is due to is being specific to their Kar Kaddy 3 (9713046) and Kar Kaddy X ( # DM9713093 ) as an add-on, or a direct replacement part for the Kar Kaddy SS ( # DM9713045 ). However, if you wanted something with more capacity, the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - Black - 12" Lift - 1,500 lbs # F27CR will be a great option....
view full answer... - Compatible Frame Size for Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels F27CRThe Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels part # F27CR is designed for 3" x 3", 3" x 4", or 3" x 5" trailer frames. The largest frame size we have a bolt-on jack for is 3" x 6", the Extreme Off-Road Swing-Up Trailer Jack with Dual Wheels part # ORJW750BD. If you have a larger frame you'll have to go with a weld-on option which I have attached a list of below. It sounded like you were looking for a reference to frame size but I wasn't quite sure so if this was not the info...
view full answer... - Will the Fulton Bolt-Thru Swivel Marine Jack Work on the Side of an A-Frame TrailerYes, the Fulton Bolt-Thru Swivel Marine Jack part # F27CR can be used on the side of an a-frame trailer. It will work great if you are securing the jack for supporting the trailer or just maneuvering it around via the wheels. The Fulton Bolt-Thru Swivel Marine Jack work with trailer frames 3" x 3", 3" x 4", or 3" x 5" so it will be great for you.
view full answer... - Recommended Replacement Swivel Jack for Tracker Boat TrailerSince you'll be moving the trailer around by hand on a paved surface, you really wouldn't need a double wheel jack like the Fulton # F27CR. Dual wheels would actually make the trailer a bit more difficult to maneuver around by hand on a paved surface because the caster will be more difficult to turn. I'd recommend the US made # DL22335 Swivel Jack from Dutton-Lainson. The jack has a 1500 lb lift capacity which is more than needed for the pretty light tongue weight of your Tracker Pro Guide,...
view full answer... - Available Weld-On Side-Mount Boat Trailer Manual Swivel JacksThe etrailer.com Electric A-Frame Tongue Jack # EJ-3520-BBX is designed for bolt-on installation on the tongue of an A-frame RV trailer. You can see a typical installation in the photo I linked for you. It might be possible to fabricate a 3-point mounting bracket that is similar to the A-frame trailer mount but this is outside of the normal application for this product. We do have side-frame-mount manual jacks made for boat trailers that are shown on the linked page. These include bolt-on...
view full answer...
- Recommended Replacement Trailer Jack To Replace Shelby 5784 Bolt On JackI recommend replacing your Shelby 5784 jack with the Fulton Bolt-Thru Swivel Marine Jack # F27CR. We do not carry any jacks with the same bolt pattern as your Shelby jack as they are designed to bolt around a trailer frame rather than on a welded bracket. Since the typical frame heights are 3"-5" tall the bolt holes are set to have 3"-5" between the bolt holes rather than have the holes mounted on center like you have on your jack. This Fulton jack is rated up to 1,500lbs and has dual wheels...
view full answer... - Fulton Marine 1.5K Sidewind Trailer Jack XPD15L0126Then that means you're looking for the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR. We use different part numbers on our site compared to the manufacturers, but this is the exact trailer jack you're wanting. Attached is a review video for you to check out.
view full answer... - Trailer Jack that Can Fit Trailer Frame that is 2-1/2 inch SquareA 2-1/2 inch square trailer frame is a little smaller than what most jacks will fit including the Fulton part # F27CR that you mentioned but you could use 1/2 inch spacers (you'd have to source them) to use this jack as it can fit as small of a trailer frame as 3 inch by 3 inch.
view full answer... - Is The Replacement Gearbox Available For Fulton F2 Jack?You can find the cover for the Fulton F2 jack gearbox here: Replacement Gearbox Cover # F500135. But if you are referring to the gearbox itself then that is unfortunately not available. I recommend looking into a new jack such as Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - Black - 12" Lift - 1,500 lbs # F27CR. I attached a helpful demonstration video for you to check out.
view full answer... - Determining Which Replacement Trailer Jack Fits Dorsey Malibu Boat TrailerI would be happy to help, but I have no way of looking your trailer by the serial number to determine which replacement side mount jack is correct. Based on the picture you provided of the jack on your Dorsey Malibu Boat Trailer a standard bolt on jack like the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # F27CR may likely work as it mounts to the trailer bracket with a center bolt like your jack. You can confirm this by comparing the dimensions of your trailer jack mount to...
view full answer...
- BullDog Jack Tube Assembly Technical Dimensions And Replacement PartsI reached out to my contact over at Bulldog and when looking this they confirmed that the old Ranger trailers actually used a TJ650 style jack which they don’t make anymore. In that case we recommend replacing it with a new style jack next to the existing one such as the Fulton Round, Snap-Ring Swivel Marine Jack # FTJ12000101 or the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - Black - 12" Lift - 1,500 lbs # F27CR.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Andrew K
Installed by:
Steven C
Installed by:
Michael B
Installed by:
Evangeline M
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Mike S
Video by:
Aidan B
Video by:
Thomas T
Updated by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
3/2/2024
As expected. It still looks new and works flawlessly.