Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
(755 reviews)
Price: $98.18
In Stock
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
Retail:$122.41
Our Price: $98.18
You Save: 20%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
13% prefer this
10% prefer this
5% prefer this
- All Info
- Reviews (755)
- Q & A (0)
- Photos
Fulton Trailer Jack
- Boat Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Weld-On
- Leveling Jacks
- Tongue Jacks
- 10 Inch Lift
- With Wheel
- Steel
- Fulton
With 1,200 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this weld-on swivel jack is perfect for lightweight marine applications. Has 11" of clearance above your trailer frame and 15" retracted height.
Features:
- Ideal for marine and recreational use
- Convenient, spring-loaded, plunger-pin swivel feature
- Swing up to stow parallel to tongue for travel
- Move back into upright position for use
- Z-Max 600 zinc finish provides superior corrosion resistance
- 600-Hour salt spray rating is about 30% more corrosion resistant than Dacromet
- Mounting bracket won't bend or bow under heavy loads
- Increased jack lifespan because pressed steel design is stronger and more durable than snap rings
- Long-lasting bushing ensures smooth pivoting operation over time
- Heavy-gauge steel construction
- Weld-on bracket sold separately
- Sidewind crank handle
- Thermoplastic wheel included
Specs:
- Bracket height:
- 12-3/4" Retracted
- 22-3/4" Extended
- Lift: 10"
- Clearance: 10-1/2" from mounting bracket to top of jack
- Inner tube diameter: 2"
- Outer tube diameter: 2-1/4"
- Pull pin diameter: 1/2"
- Wheel diameter: 6"
- Lift capacity: 1,200 lbs
- Limited 5-year warranty
NOTE: If you do not have an existing bracket welded on to the trailer, you will need part number P9012-00 in addition to this part.
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
XP10W 0301 Fulton Marine and Recreational Bolt-Thru Swivel Jack, Sidewind, 10" Travel, 1,200 lbs
Item # FXP10W0301
Installation Details
California residents: click here
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs - FXP10W0301
Average Customer Rating: 4.8 out of 5 stars (755 Customer Reviews)
With 1,200 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this weld-on swivel jack is perfect for lightweight marine applications. Has 11" of clearance above your trailer frame and 15" retracted height.by: Glen04/14/2023
I was not knowledgeable in different kinds of trailer jacks, but I was looking for a weld-on trailer jack replacement for an old (2006) Trail-Rite trailer (see pics).
I had to talk to a couple of etrailer people, and after doing some of my own research on the site, I found a Fulton replacement that was a perfect to replace my old Fulton. If you have this type of jack, which seems to be not very popular anymore because it appears most people are using bolt-ones now, this should fit. Keep the nut and bushing from your old jack (bushing goes inside the recessed area of the mount). The new jack will not come with those parts.
The new jack mount does not seem to be built as heavy/sturdy as the Fulton it replaces, but I guess that's standard these days. Also, most places don't seem know these types of replacement jacks still exist, and few places will carry them in stock, so etrailer is the place to go.
by: Randy 03/25/2023
Perfect fit for my 2010 Triton boat trailer. I had it changed in about 15 minutes. Also quick shipping by eTrailer. My go to for trailer parts.
Randall G.
3/25/2024
Working great
by: Michael 08/01/2023
Good jack, however the hole for the lock was smaller than the hole on the trailer mount.(Zieman) hence it was not a direct replacement and I had to drill the hole in the trailer a bit larger. The jack swings only one way now, which is fine, but as I said it is bnot the exact replacement as the website stated.
by: Randall 07/13/2022
Fulton Trailer Jack arrived on time and fit perfectly.
Randy
7/13/2023
Trailer Jack is working great after 1 year!
by: Steven 02/17/2024
I get all of my trailer needs through ETrailer, excellent service and great prices!
by: Joseph 02/04/2024
It’s exactly what I needed, a perfect fit. I would suggest ordering a replacement bushing and nut.
by: Brian 11/01/2023
Order came very fast and was exactly what I needed; very happy with the customer service, shipping and would buy from etrailer again!
by: Richard 09/27/2023
Easy to ID the exact marine jack I needed. Customer service was exceptional.
by: Shawn 07/09/2023
Great Jack for the price. I used it on my 19ft skeeter bass boat trailer and it’s held up well so far.
by: Matthew 10/18/2023
Perfect replacement for my Mastercraft boat trailer.
by: Eli Brooks10/24/2019
Within 10 minutes of opening the product had it bolted on the only thing I had to do was switch out pull pin from old jack could’ve drilled the holes out but decided to
Switch the handles and it’s good to go also a better jack than the OEM great customer service super fast shipping
by: Gordon 08/31/2023
Perfect fit with Eagle Boat trailer welded on mount piece
by: Ryan08/03/2023
Don’t recommend a part that isn’t even close to fitting. Then charge for return.
by: Terry 05/19/2023
Checked locally for this jack because I didn’t want the hassle of ordering online. Next time I’ll go straight to E-trailer. Totally hassle free and the first jack I looked at was the one I needed. It arrived in coastal NC in 3 days and fits like a glove. Exact same brand.
by: Steve T.10/10/2013
Got here faster than I thought it would and bolted right on. The only thing that surprised me was that it didn't include the bracket, bolt and bushing for the trailer, so it wouldn't work on a new application as shipped.
by: Nate04/14/2020
Very simple installation. It was a identical replacement for the one that was on there. My only disappointment is that it was made in China. Otherwise I would of given it 5 stars. The original Fulton was made in the U.S.A.
by: Mike 02/05/2024
We built great products
by: 05/19/2023
Nicely Manufactured with a fine smooth finish.
Love the look strong and sturdy.
However, would not attach to my Four Winns Trailer. Have to Return for Refund
by: Mark01/25/2023
It didn't fit up to my old weld model like they said. Had to have the old plate welded to the new jack. The quality is fine tho.
Jenny N.
2/1/2023
I am glad that you were able to use the old bracket to weld the jack to. There is a bracket that can be added to the trailer frame, part # P9012-00. It will be available on our site in the future. It is currently on an extended back order with the manufacturer.
by: Mark 12/16/2023
I received the proper idem and it came “early!”
by: Jerry M08/06/2016
I had an older trailer with an equally older Fulton bolt through swivel, weld on, side winding jack. When it needed replacing I searched on the net not believing I could find a replacement to actually fit the original welded receiver unit. I was wrong. Etrailer.com had the exact jack replacement I needed. I ordered on Monday and asked for the three day fast shipping as I required the use of the trailer by the end of the week. Etrailer shipped the product I needed a day earlier in plenty of time. This is not my first order. Etrailer is an excellent company to deal with.
Jerry M.
8/7/2017
Lovely
by: Paul 11/15/2023
It's the product I was looking for
by: Steve O.05/16/2013
I used this to replace the Fulton jack on my EZ-Loader trailer that came with a 2006 17' Glastron bowrider. It was a seemless replacement into the existing jack mounting plate on my trailer. On a side note, customer service from etrailer.com was outstanding.
Adam
7/1/2014
I have pretty much the same setup. Did you have to drill a larger hole for the release pin like some other people?
Steve O.
7/1/2014
It has been a while since I did this install, but I really dont recall having to drill out the hole for the release pin. I believe my previous jack already had the 12 release pin. Your mileage might vary, but this jack was pretty much identical to the jack that came with my trailer.
by: Mark04/14/2022
The product was as advertised but the customer service at etrailer is exceptional. The product was delivered in the quick timeframe they said it would be and the order was complete. Thanks etrailer. I’ll be back.
Sam O.
8/4/2022
Well made trailer parts, Very good customer service, will buy from this seller again
25
754
Show More Reviews
See what our Experts say about this Fulton Trailer Jack
- Replacement Jack Compatible with Welded Jack Plate on Ranger Boat TrailerFor your welded plate, the Replacement Bolt-On Mounting Kit for Fulton XP Series Jack # F500349 sounds like what you are describing but it isn't a welded plate. If that is similar to what you have, then I recommend the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301. The center bolt is the style that many jacks will work with. If you have this, then this will be a good fit. If that isn't what you have then the snap ring jack like the Fulton...
view full answer... - Bolt On Mounting Bracket & Hardware Needed To Mount Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301You will be able to use the Bolt-On Mounting Kit # F500349 with the Mounting Hardware # F500286 to bolt on the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301.
view full answer... - Jack Recommendation for Trailer Frame that is 3.5 inch by 3.5 inchThe jack won't fit unfortunately since the max frame width it can fit is 3 inches but you could pretty easily go with a weld on jack like the Fulton # FXP10W0301.
view full answer...
- Availability of Swivel Bracket that Mounts to Trailer Frame for Fulton JackSounds like you are looking for the part # F500242 which is a swivel mounting bracket for the trailer side of a Fulton Jack like the part # FXP10W0301.
view full answer... - Will Fulton Bolt-Thru Swivel Marine Jack Work on 1998 Ranger TrailerI'm not sure what exact jack you have but if I was making a bet I would say it's a Shelby which is no longer in business. The Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 looks similar but it won't work with your existing mount. There is not a jack that will that I'm aware of so I recommend the Fulton Bolt-Thru Swivel Marine Jack part # FXP10 which bolts onto the frame.
view full answer... - Availability of Replacement for Shelby Jack with Weld-On BracketI did some checking but it doesn't look like there are any trailer jacks that use that exact same method to attach the jack to the bracket so I recommend replacing the jack with the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 and using the Weld-On Jack Mounting Bracket # P9012-00 for the installation. Basically the difference between welding a bracket and using a bolt-on installation is that a weld-on is much more secure and you don't have to worry about keeping tabs on the mounting...
view full answer...
- Solution for Replacement Cap on Shelby 5756 Trailer JackTo replace the cap on your Shelby 5756 trailer jack you will have to come up with a creative solution to cover the top and keep it protected. Replacement caps are not available since Shelby is no longer around. You might be able to make something out of a moldable plastic or other similar materials but I'm not sure how well that would hold up and stay on in the long run. The only other solution would be to replace the jack with one like the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301.
view full answer...
- Tandem Boat Trailer Suspension Equalizer Sits Unlevel And Contacted The FrameAs your trailer is 22 years old I recommend that all the suspension components are gone through and upgraded. The bolts and bolt holes could be rusted internally causing the suspension to not function properly through its range. This could also lead to your issue with the equalizer riding uneven. A kit like the Dexter E-Z Flex Suspension Kit # K71-652-00 will not only give you a cushioned equalizer but also give you wet bolts. The wet bolts will allow you to easily add grease to the bolts...
view full answer...
- Recommendations For Replacement Jack With 1000 Pound Capacity and Tapered Collar BracketIt looks like the item you selected, Fulton Bolt-Thru Swivel Marine Jack, part # FXP10W0301, would be a good replacement jack. On the back plate of this jack there is a raised or welded on circular piece of metal, but by what you described I do not think it will work with your existing bracket. I browsed through the website using the specifications you provided for your jack, I found a jack that should work for you. The Fulton Bolt-Thru Swivel Marine Jack w/ Caster, part # FXP10, which...
view full answer... - Will Fulton Bolt-Thru Swivel Marine Jack Replace Fulton JackThanks for the photo and based on that I can tell you the Fulton Bolt-Thru Swivel Marine Jack # FXP15W will absolutely work as a replacement for your current Fulton Magnum trailer jack. While this jack looks like it could measure up to your mount, you may find that you need the Jack Mounting Bracket for Fulton Marine Jack # P9012-00 which has mounting holes that measure 3" on center.
view full answer...
- Can Fulton Jack with Weld on Bracket FXP10W0301 Replace Shelby Trailer JackWe've had this question before and we've determined that the Fulton jack we have part # FXP10W0301 while uses a similar style bracket is not the exact same so it would not work as a direct replacement. You could have the mount you have now removed and install the part # P9012-00 in place of it to install this one and you'd be set though.
view full answer... - Replacement Trailer Jack For Shelby Trailer Jack On 2003 Heritage Boat TrailerFrom the measurements of the mount you provided it sounds like the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 will work. The Jack Mounting Bracket # P9012-00 that the Fulton # FXP10W0301 uses is 4 5/16 inch x 4 7/16 inch and has 4 holes 3 inches apart. The option I recommend that will work no question is purchasing the Jack Mounting Bracket # P9012-00 to replace your existing mount and installing the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. I included a video of the Fulton...
view full answer... - Fulton Magnum Series Jack Recommendation.It looks like the Fulton Trailer Jack # FXP10W0301 that you referenced is the same style of jack you have on your trailer. This is the only jack we offer in that style so it would be the only thing that would potentially work. Still, I would rather you cut that jack off of your trailer and install a new one as installing one in the way you are interested in has never been tested and we are not sure it would work.
view full answer...
- Replacement For a Shelby Jack With a 5-1/2 x 3" bolt PatternWe do not currently have a jack with a 5-1/2" x 3" bolt pattern to match the bolt pattern on your welded plate. I have measured a few different jacks to double check fit. I recommend the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs Item # FXP10. Fits 3" x 5" frames and does not require any drilling into the frame. If you prefer a weld on style I recommend Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs Item # FXP10W0301...
view full answer... - Replacement Swivel Jack Recommendation for Baker Boat TrailerThe Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 that you referenced would be a great choice for a replacement for what you have. Most likely though you'll need the weld on bracket to go with it part # P9012-00 unless your trailer happens to have this exact bracket already. For comparison purposes I attached a picture of the mount with some dimensions on it.
view full answer...
- Replacement 1200 Pound Fulton Boat Trailer JackFrom the pictures you sent in the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301 is the type of jack you're looking for. The mounting plate that is welded to the trailer, part # P9012-00, looks to be fully intact. You may need new hardware though, part # F0933325S00.
view full answer...
- Availability of Swivel Trailer Jack to fit 5-1/2 Inch Tall Trailer Frame MemberGiven your question, I'm assuming that your trailer frame is slightly less than 5-1/2 inches in height, as you're needing a bracket to fit that size. Unfortunately, none of our bolt on jacks can accommodate a trailer frame member taller than 5 inches. The best thing to do in this circumstance is to use a weld-on jack like # FXP10W0301 which has a 1200 lb capacity, and a retracted bracket height of 12-3/4 inches and when fully extended a bracket height of 22-3/4 inches, for a total of...
view full answer... - Will Replacement Hardware Kit For Fulton Swivel Jack F0933325S00 Work W/ Older Fulton Magnum Jack?It sure will! The Replacement Hardware Kit for Fulton Swivel Jack # F0933325S00 were looking at is confirmed to fit your older Fulton Magnum Swivel Jack made back in roughly 2006. This was confirmed by my contact at Fulton. I included a video of the # F0933325S00 for you to take a look at.
view full answer... - Recommended Fulton Swivel Jack with Bolt-On MountingThe Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301 is for weld on bracket # P9012-00 which is sold separately. If you are looking for a similar bolt on option, I recommend the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs # FXP10
view full answer... - Replacement for Fulton Magnum Series Trailer JackThe correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 if you have a bolt-thru mounting bracket or part # FTJ120W0301 if you have a snap-ring mounting bracket. I have attached a photo of each to help you distinguish which you have. The bolt holes you are referring to are used as an alternative to mounting the mounting bracket to the frame of the trailer, not the jack to the mounting bracket. I called...
view full answer...
- Replacement Trailer Jack for Weld On Mount Shelby Jack Model Number 5874A8Shelby jacks are no longer in production. If the welded mount had a bolt-thru design, then I recommend checking the pin hole dimensions for compatibility. The bolt hole centers are 3 inches apart on the Jack Mounting Bracket for Fulton Marine Jack # P9012-00 for example. This is compatible with jacks like # FXP10W0301. Your other option is to ditch the welded plate if it doesn't match up and use a mount like that found on the Fulton Bolt-Thru Swivel Marine Jack - Bolt On - Sidewind...
view full answer...
- What Replacement Parts Are Available for an etrailer MJ-1200B or Fulton Swivel Marine JackYou can replace the mounting bracket and hardware on an # FXP10W0301 or # MJ-1200B, but the tube and swivel bracket are not available as replacement parts for these jacks. You can use the Replacement Mounting Kit for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs # MJ-1000B-MK for the mounting bracket and Replacement Mounting Hardware for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs # MJ-1000B-MBB for the hardware. You can also replace the inner bearing...
view full answer... - Can the Fulton 1,200 Pound Bolt-Thru Swivel Marine Jack be Used for a 2,000 Pound Boat and TrailerSince the capacity of a jack does not have to hold or lift the entire weight of the trailer and the boat, you will just need to make sure that the trailer when loaded has a tongue weight less than 1,200 pounds. For a 2,000 pound boat plus the weight of the trailer, it is unlikely that the tongue weight would be more than 1,200 pounds so you will be able to use the Fulton Bolt-Thru Swivel Marine Jack, # FXP10W0301.
view full answer... - Fulton Swivel Jack Bracket Recommendation for a 1,200 lb JackFor a swivel mount for a 1,200 Fulton jack you would need the part # P9012-00 and not the Atwood part that you mentioned. This is the correct bracket for the swivel 1,200 lb Fulton Jack part # FXP10W0301.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Noah M
Updated by:
Ryan F
Installed by:
Patrick B
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Chris R
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Glen
4/15/2024
Still works fine. But trailer is old and rusting saltwater environment, so Ill be getting a new trailer. As a result, I wont be using this jack anymore.