Replacement Bevel Gear Kit for Fulton Jacks - 800 - 1,200 lbs
(147 reviews)
Price: $20.19
Replacement Bevel Gear Kit for Fulton Jacks - 800 - 1,200 lbs
Item # F0933302S00
Retail:$35.20
Our Price: $20.19
You Save: 43%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (147)
- Q & A (0)
- Videos (1)
- Photos
Fulton Accessories and Parts - F0933302S00
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Gears
- Fulton
Replacement kit includes everything you need to replace or repair the bevel gears on your Fulton marine or recreational jack.
Features:
- Replacement kit includes gears, roll pins, washers and a handle bushing
- Fits Fulton marine jacks FXP10, FXP10W0301, and FXP100W0301
Fits:
- Fulton marine jacks: FXP10, FXP10W0301, and FXP100W0301
0933302S00 Fulton Bevel Gear Kit for Marine and Recreational Jacks
California residents: click here
Video of Replacement Bevel Gear Kit for Fulton Jacks - 800 - 1,200 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Fulton Replacement Bevel Gear Kit Marine Recreational Jack - F0933302S00
Hi everybody. Andy here with etrailer.com and today we're gonna take a brief look at this replacement Bevel gear kit. Now this replacement kit includes everything that you are going to need to replace or repair the Bevel gears on your Fulton Marine or recreational jack. And on your screen, I am including the model numbers of the Fulton jacks that this is going to work with. And also on your screen, I am putting the measurements of the parts of this kit in case you are in need of them. I saw that our neighbors on our product page here at etrailer.com for this kit many of them asked for these dimensions.
So I went ahead and included a a diagram of the measurements of the pieces of this kit in case you are in need of them. And you can find this same photo with the diagrams and measurements on this product page. So this kit includes the gears, the roll pins, the washer and the handle bushing, and you're also going to receive a set of instructions as well. And that's gonna conclude our look today. I do hope that it was helpful for you.
Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Replacement Bevel Gear Kit for Fulton Jacks - 800 - 1,200 lbs - F0933302S00
Average Customer Rating: 4.8 out of 5 stars (147 Customer Reviews)
Replacement kit includes everything you need to replace or repair the bevel gears on your Fulton marine or recreational jack.by: Eric 05/10/2023
The parts i ordered are still working after a year in service and suggest these whenever refurbishing your jack.
by: Pat04/19/2024
the square nut was the ONLY thing I needed and it doesn't fit
Jenny N.
4/19/2024
Hey I am sorry to hear that it does not fit your jack. Can you tell me what model of jack that you have? Do you know the weight capacity of the jack?
by: Mike B04/15/2017
After calling Fulton customer service to find the parts for my Jack that was on my Trailrite trailer from 1990. They told me the jack was obsolete and no parts were available for the jack any longer. My boat mechanic told me to check out etrailer.
I found the videos helpful in matching up my existing parts with the current products. Found that a combination of Fulton bevel kit for the 800-1200 jack and the Bulldog 2000lb. Bearing kit was what I needed, I did have to use a combination of new and old washers to get the right spacing.
by: William 02/06/2024
Product was not available when I placed order. They kept me updated until product was available and they sent order to me
by: Robert03/05/2021
This kit allowed me to restore normal operation to my Fulton boat trailer jack. The vertical gear in my jack was missing one tooth, leaving the jack marginal to lift the tongue of my trailer, but works like a new jack after installing this repair kit.
Robert
3/6/2022
This kit allowed me to rebuild my boat trailer jack rather than replace it. It now works like new. The parts fit perfectly.
by: Larry 09/01/2022
Worked well.had to install outside in the MN winter weather but went in.
Larry
9/8/2023
Still working as it should. Thanks
Mike L.
11/1/2023
@Larry Awesome, glad to hear that!
by: Jeremy 01/25/2022
Price was fair, ordering was easy, tracking was spot on, installed in my jack last night with no problem at all.
Jeremy
1/25/2023
I had to rebuild the jack. It is still installed on my trailer and still working as expected. No issues whatsoever.
by: Mark 12/15/2023
fit perfectly. thank you.
by: Peter C.04/22/2016
This Replacement gear kit for the 1,200lb. Fulton Tongue jack on my 2008 Boston Whaler trailer was perfect in every way. It was ultra easy to install, fit perfect and has worked flawless now for over a year, being used every weekend throughout the spring, summer and fall. I also highly recommend etrailer as they were incredibly helpful in selecting the correct part, in pricing and ultra fast shipping. George is great! thank you.
Peter C.
4/22/2017
Over year later with proper lubrication works perfect.
by: Jerry Doughty11/16/2013
Fulton jacks are very repairable,so having repair parts saves a lot of money not having to replace a jack just because one part is broken.I've turned into my boat trailer too sharp 2 times and broke the jack,but have been able to fix it both times.
Jerry D.
11/22/2014
Still working like a champ.
by: Philip 11/17/2022
etrailer notified me the part I ordered was on backorder for two months and suggested a different equivalent that could ship right away. That and how wonderful and helpful Sara was when I called to change to the other part make etrailer a go-to from now on.
by: Tom P.09/29/2014
Product was great but the instructions did not address specifically the problem of how to take out and put in the parts to the jack. It was a general instruction sheet for the jack and other types of jacks. Luckily I'm fairly mechanically inclined and figured out what to put where. It seems to work fine. People at etrailer were very helpful and professional.
Tom P.
9/29/2015
That jack worked for awhile. Parts were okay but the main screwbolt seemed to give out. I ordered a new jack from your company and its doing just fine.
Rachael H.
9/30/2015
Thanks for the follow up, happy to hear you new jack is working out for you.
by: Bob W11/07/2015
Installed and seems to be working OK. For the Jack used on my trailer for my 17.5 Starcraft. The previous gear split in 1/2 which seems strange for a boat that weighs what mine does. This one seems to be working as it is supposed to. I followed the directions that came with part and from another post here on this part.
Bob W.
11/6/2016
Still working after 1 year, although I didnt use it much in the past year due to illness.
by: Bruce07/15/2018
Took about an hour. Messy but worth it. Need a good set of pin punches for sure. Had to make up a shim for handle drive gear to get clearance for good gear mesh. Was sloppy in the handle in my opinion which led to failure in the first place. Anyone who has ever set up gears gets what I’m saying. Works better than new now and I expect it to outlive me. Great service!
Bruce
7/15/2019
Still working great!!
by: Richard G.07/20/2015
After several attempts to purchase repair part at our local Auto Zone, I ordered part on line from E-Trailer. Service was prompt and exactly what I needed.
Richard G.
7/19/2016
Still working like the day I installed it.
by: Kevin 03/26/2021
This kit saved me tons of money and hassle rebuilding my factory prestige trailer crank. Parts have been working like a champ! Recommend!!!
Kevin
3/27/2022
My replacement parts are still working flawless one year later!
by: Todd06/29/2018
My jack was over 20 years old & I used the main pieces ( gears & pins ) to make it happen. Works & gears mesh perfectly. Thanks!
Todd
6/30/2019
Fantastic
by: Jack O11/12/2014
Just what I needed to get my trailer jack repaired quickly
Jack O.
11/12/2015
Product still in use ,working well
by: Eric05/18/2016
Product was delivered as described and fit perfectly, it was generally an easy repair if you're at least a little handy. It has been installed for one year so far and gets use at least 12 - 24 times a year of actual cranking on it in the boat hitch.
by: Mike 05/25/2021
I love the fact that etrailer sells repair items like this. DIY is my default mode (blame it on Dad) :) In this case, I probably should have been able to fix it with these parts, but I either lost patience or ran out of time. Good luck to you - I think this kit will do the job if you can take your time. Be slow to be quick.
by: Dave08/10/2015
I guess I ordered the wrong kit. The gears were slightly smaller than the old ones. I needed to use my trailer so I installed anyway. I added the washer below the driven gear on top of the existing washer to take up the slack. It is working just fine like that. Will order the larger kit in case this doesn't hold up, but am happy that I got it back in use. My mistake not theirs...
by: JOHN D.05/01/2015
Great company, I searched all over the internet for these gears, eBay was first and double the price. These guys have the right parts and the right prices. They were priced so perfect that I bought a second set of gears as a back up so that next time my trailer jack gears break, it wont be down for more than 15 minutes. Also there shipping charges are great, there what they should be, about $3.00 to ship rather than the $20.00 plus to ship from eBay sellers. Thank You Much, Very Happy Customer.
by: Jeff H11/26/2013
The parts I ordered arrived quickly, and I was able to repair the trailer jack. Customer service was great, I got follow up e-mails from the time I ordered until after the product arrived. I did have a few problems however.
1. The washer that goes beneath the driven gear was not included in the package. The original appeared to be in good shape, and I was able to re-use it.
2. The driven gear, drive slot was slightly smaller than the driven pin, this would not allow the gear to seat fully. After disassembly, I noticed witness marks where the driven pin hit both sides of the channel in the gear. I was able to de-burr the gear channel with a Dremel tool and fit the gear to the pin.
3. The bushings for the handle did not fit the body of the jack. Again, I re-used the original.
4. The drive gear roll pin was larger than the hole in the jack handle. The original assembly used a spring-style roll pin. I replaced this pin with another spring roll pin.
To be fair, I called the jack manufacturer and was told this was an older jack, and the parts to fix it might not be available. When the repair was complete, The jack worked as designed. The only problems that I attribute to the product are the missing washer and the clearance of the driven gear.
by: Steve09/02/2019
Thanks again for the on time delivery. “I definitely will be ordering in the future “. And will share the wealth
with others . Now the boat trailer stabilizer when cranking it lifts the trailer ball to separate the vehicle
From the trailer as it should , with the new gears and pins installed purchased “thanks again”
by: Stephen 03/02/2020
Very helpful in deciding which parts fit an older Fulton trailer jack. Jack now working well since I rebuilt it with parts they suggested.
25
147
Show More Reviews
See what our Experts say about this Fulton Accessories and Parts
- Availability of Bevel Gear Repair Kit for Fulton EJ-1000 800-lb Trailer JackThank you for providing the photo of your Fulton jack handle as well as the clear description of the compatibility issue you've encountered with the jack repair kit you purchased, part # F0933302S00. My contact at Fulton was able to confirm that your particular jack is one of their earlier EJ Series jacks. Based on the photo and description it appears to be an EJ-1000. My contact advised that this was one of their earliest non-repairable jacks and so the kit you ordered will not work and...
view full answer...
- Is Gear Kit Available for the Reese 74410 Trailer JackWe do not offer a gear kit specifically for the Reese 74410 trailer jack but there is a good possibility that the Replacement Bevel Gear Kit for Fulton Jacks, # F0933302S00, will work for you. I have included a picture which lists the dimensions of each part included in the kit. I recommend comparing these measurements to the measurements of the gears currently on your jack.
view full answer...
- Will Lippert Components Gear Box Fit Fulton Landing GearThe Lippert Gear Box # LC276602 may fit your Fulton jack but they have not been tested together so I cannot say it would work. We do have replacement gears for Fulton jacks you can check out. Check out part # F0933302S00. The jack models that the gears are designed to fit are listed on the product page.
view full answer... - How Does the Replacement Bevel Gear Kit F0933302S00 InstallInstalling the # F0933302S00 gears is fairly easy but without proper guidance I can see how it would be pretty difficult, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin. Remove the pin. You can then remove the handle, square block and gear. Remove the bottom gear by lifting it out. If the bottom roll pin is damaged remove it. The washer can be replaced after removing the lower pin. When replacing the bottom gear on the roll...
view full answer... - Specs of Bevel Gear Kits # F0933302S00The Replacement Bevel Gear Kit # F0933306S00 is for applications. The # F0933302S00 will fit the following Fulton jack models: TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100. Since your jack is as old as it is and you do not know which model you have or even if it is a Fulton jack, I cannot say for certain which gear kit you would need. I attached a page that has all of our Fulton weld-on application jacks for you to check out. You may find that it...
view full answer... - Will Replacement Gears for Ram Jack Fit Fulton JacksThe Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks # MJ-1000B-GR will not fit Fulton jacks, although they do look similar. This gear kit is only designed to fit MJ-1000 Series Ram or etrailer jacks. The Replacement Bevel Gear Kit for Fulton Jacks - 800 - 1,200 lbs # F0933302S00 is the correct kit for Fulton jack models TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100. As you said you may also want to replace your jack entirely with...
view full answer... - Repair Kit for Fulton 1,000 lb JackIt sounds like you have a Fulton or Cequent branded 1,000 capacity jack and are in need of a repair kit. The part # F0933302S00 is a repair kit for Fulton jacks with a weight capacity of 800-1,200 lbs. Based on the picture you submitted this should be what you would need.
view full answer...
- What are the Dimensions of the Bevel Gears in the Fulton Bevel Gear Kit # F0933302S00I pulled the Fulton Bevel Gear Kit, # F0933302S00, from the warehouse and measured the bevel gears for you. The gears are 1-1/8 inches outer diameter x 15/32 inch thick with a 1/2 inch inner diameter. The groove pin is 3/16 of an inch in diameter x 1 inch long. I have posted a photo showing these measurements. The gear kit is designed for use with Fulton jack models TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15/L/W/WC and XPF15L. If you can tell me the make and model of your jack,...
view full answer...
- Fulton Swivel Trailer Jack Inner Leg Does Not Go Up or Down when Turning the HandleOn some jacks the inner tube will spin when you turn the handle and it will not appear like the inner leg is moving up or down. Try keeping the wheel from spinning when turning the handle because sometimes it just needs a little resistance to get going. If it continues to not go up or down then there is most likely a problem in side the jack with the beveled gears and they would need to be replaced. You can take the top cap off and turn the handle to see if the gears are moving. If they...
view full answer... - Will the Replacement Bevel Gear Kit for Fulton Trailer Jacks # F0933302S00 Fit a 1,000 Pound JackThe beveled gear kit that you have referenced, # F0933302S00, is designed for Fulton jacks with capacities ranging from 800 to 1,200, so this should be the correct set for your 1,000 pound model. To make sure, you can compare the measurements of the old parts to those in the picture I have included.
view full answer...
- Beveled Gear Kits For Fulton Trailer JackWe only offer 1 beveled gear kits designed to work with Fulton jacks at this time. The kit that we still carry is for Fulton jacks that have a capacity between 800 to 1,200 lbs, this kit is part # F0933302S00. I have attached a photo that shows the dimensions of the components in the kit. We no longer carry the kit for the Fulton jack models that range in weight capacity from 1,500 to 2,500 lbs. If you visit our website and check this kit out, it lists the size of the parts in the kit....
view full answer...
- Replacement Gears and Pins for Fulton Bolt-Thru Swivel Marine JackWe've got you covered with the Replacement Bevel Gear Kit # F0933302S00. This kit includes the gear and pin that you mentioned needing for the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. I am attaching an installation video for the Gear Kit # F500314(that we no longer carry) that you can reference for the install. These kits are for different jacks but the process will be very similar.
view full answer...
- Replacement Gear Kit For Older Fulton Square Tube Weld On JackWe do offer replacement parts for Fulton jacks, including the square tube type. These parts are not always a universal fit, so you will need to order replacement parts that are rated correctly for your particular Fulton jack. If you can find a model number somewhere on the jack it would really help to narrow it down. For example the Fulton gear kit # F0933302S00 comes with a 12 tooth gear and fits a variety of Fulton marine and recreational Jacks, mainly their FXP10 model jacks. If you...
view full answer... - Replacement Bevel Gear Kit for a Fulton Swivel Trailer JackWe have the Fulton Replacement Bevel Gear Kit, part # F0933302S00. This will fit Fulton marine and RV jacks up to an 800-lb weight capacity. The Fulton jack model numbers it fits is TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100 and others. We no longer carry the gears that will fit the TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15/L/W/WC and XPF15L. These gears were mainly for 1,500 to 2,500 pound jacks. I would go by weight capacity and, if...
view full answer... - Finding Replacement Gear and Handle Kit for Fulton 1,200 lb Side Mount Side Handle JackIt took me a minute to go through all of our trailer jacks but based on the pictures you sent in the jack you have is a Fulton part # FTJ12000101. Most jacks have the pull pin on the right side and yours is on left like this Fulton as well as has the zerk fitting in the right spot. So the correct gear kit would be the part # F0933302S00 and the handle kit is the part # F0933305S00.
view full answer...
- Replacement Bevel Gear Kit for a Fulton 750 Pound Capacity Trailer JackIt is likely based on the capacity of the jack that you will need bevel gear kit, # F0933302S00, that you have referenced. You may be able to find more information about the jack by looking at the cap or for numbers near the bottom of the inner/outer tubes. You can also look at the dimensions of the parts in this kit in the picture I have included and compare them to what is on your jack.
view full answer...
- Fulton Jack Repair Kit AvailabilityThere are one Fulton Jack repair kit available that could potentially work for you. You will need to get some measurements from the gears in your jack in order to know which one would work for you. I attached a picture that has all of the dimensions for the Replacement Bevel Gear Kit # F0933302S00. This kit is for 800-1,200 lb jacks. The other kit for 1,500-2,500 lb jacks is no longer available.
view full answer...
- Replacement Gear Recommendation for Fulton Trailer JackBased on the dimensions you listed it sounds like you need the part # F0933302S00. The gear has an inner diameter of 1/2 inch and an outer diameter of 1-1/8 inches. I attached a picture that has all of the gear dimensions for you to check out as well.
view full answer...
- Recommended Replacement Gear Kit for a Fulton 750 lb JackI did some digging around and for your Fulton Jack, you're going to want the Replacement Bevel Gear Kit for Fulton Jacks # F0933302S00. These gears are going to be only an 8th inch smaller than your current gears but will still have the same 1/2" diameter inner diameter.
view full answer...
- Replacement Gear Kit for Fulton Trailer Jacks with 1,000 Pound Weight CapacityThe beveled gear kit that you referenced, # F0933302S00, is designed for Fulton jacks with weight capacities ranging from 800 to 1,200, so this should be the correct set for your 1,000 pound model. This kits is designed for use with Fulton jack models TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100. Installing the gears is fairly easy, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin. Remove...
view full answer...
- Marine Jack Recommendation to Replace Fulton Magnum Boat Trailer JackI spoke to my contact at Fulton and he informed me the Fulton Magnum series jacks were an older line of jacks that had capacities of over 1,000 lbs and have been discontinued, so you will not be able to find the exact jack. However, I have linked to a page that shows our Fulton marine jacks with a 2-inch outer tube width. Take a look at the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # FXPD15L that offers a 1500-lbs and 12-inch lift capacity. It does not have a 3000 lbs capacity...
view full answer... - Solution for Pro Series Trailer Jack that Has Damaged Internal GearWe do not have a rebuild kit for the Pro Series jack it sounds like you have part # PSEJ10000101 so best option would be a replacement jack.
view full answer... - How to Identify Correct Replacement Internal Parts for Fulton Square JackWe do offer replacement parts for Fulton jacks, including the square tube type. These parts are not always a universal fit, so you will need to order replacement parts that are rated correctly for your particular Fulton jack. Your jack model number and weight capacity should be either stamped on the jack tube or printed on a label attached to the jack. As example, the Fulton Replacement Bevel Gear Kit, part # F0933302S00, will fit Fulton marine and RV jacks up to an 800-lb weight capacity....
view full answer... - Availability of the Handle Bushing for a Fulton JackThe bushing in the Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks # F0933305S00 is only available in the kits. We do not have it available on its own. It is also available in gear kits like the Replacement Bevel Gear Kit # F0933302S00.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Carrie F
Video Edited:
Dustin K
Installed by:
Randy B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Eric
5/11/2024
The rebuild kit is still working fine.