Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs
(755 reviews)
Price: $79.28
In Stock
Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs
Item # FXP10
Retail:$125.00
Our Price: $79.28
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (755)
- Q & A (0)
- Photos
Fulton Trailer Jack - FXP10
- Boat Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 10 Inch Lift
- With Wheel
- Steel
- Fulton
With 1,200 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this bolt-on swivel jack is perfect for lightweight marine applications. Has 10-1/2" of clearance above your trailer frame and 14-1/2" retracted height.
Features:
- Ideal for marine and recreational use
- Spring-loaded J-bolt creates a convenient handle that swivels the jack up and out the way when not in use
- Results in saved time and effort compared to cranking a fixed-mount jack
- Z-Max 600 zinc finish provides superior corrosion resistance
- 600-Hour salt spray rating is about 30% more corrosion resistant than Dacromet
- Bolt-Thru mount provides minimum deflection and maximum support
- 3-D Formed, heavy-gauge steel stampings
- Proprietary bushing material
- Heavy-gauge steel construction
- Sidewind crank handle
- Thermoplastic wheel and mounting bracket for 3" x 5" trailer frames included
Specs:
- Bracket height:
- 14-1/2" Retracted
- 24-1/2" Extended
- Lift: 10"
- Clearance: 10-1/2" from mounting bracket to top of jack
- Tubing diameter: 2"
- Pull pin diameter: 1/2"
- Wheel diameter: 6"
- Lift capacity: 1,200 lbs
- Limited 5-year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
XP10 0101 Fulton Marine and Recreational Bolt-Thru Swivel Jack, Sidewind, 10" Travel, 1,200 lbs
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs - FXP10
Average Customer Rating: 4.8 out of 5 stars (754 Customer Reviews)
With 1,200 lb. lift capacity, corrosion-resistant zinc plating, and 10" lift, this bolt-on swivel jack is perfect for lightweight marine applications. Has 10-1/2" of clearance above your trailer frame and 14-1/2" retracted height.by: JD02/01/2023
Bought this swivel jack to replace an old non-swivel type on my aluminum I beam trailer. Had to weld up a couple clips but the install was quick and easy. Arrived a few days after the order was placed. Competitive pricing and excellent customer service.
by: Harold04/05/2015
This trailer jack is great and the shorter length overall fixed a big issue for me. Now I have a proper set height on my trailer when towing and can swing the wheel of the jack up and down without setting the trailer ball too high. Really a well built product. This is my second experience buying from e-trailer and both times they did great on shipping. Best of all are the videos and other information demonstrating the products, that makes it much easier to know you are getting what you need.
Harold
4/11/2016
Same as last year. It is a great product, and your service was great.
by: Richard 05/10/2023
I had one of these new in 1990. Finally wore out after using it about 1000 times. This one is very similar, but even better due to a better shaft bearing on the handle side. Probably outlast the trailer. Very smooth, too. Also, easy install. No photo, but looks like the catalog, but imagine a trailer tongue through the clamping area.
by: Reginald07/26/2021
Mounts easy and works great.. ( you might look at using better carton or overboxing for online shipping. The box was destroyed and had to be taped up. Fortunately no parts were missing!)
by: Robert11/20/2023
Perfect match for my Karavan Boston haler boat railer!
Robert
12/18/2023
Perfect fit for my Boston Whaler Karavan trailer. Even better than the original, which lasted 17 years. Very solid!
by: Daniel12/22/2017
This tongue jack fit my needs perfectly. The Fulton was a name I knew and trusted. I spent the extra money for the heavy duty quality which will pay off when I move this big trailer around in my driveway. The installed grease fitting for the crank gears means I can keep the gear chamber filled with grease and not let any water enter. A real plus. Would recomend.
by: Jim02/06/2017
The Fulton jack was just what I expected.
The service from etrailer.com was great. I paid for standard (5 to 7 business day) shipping and the jack arrived in four days.
Great Job etrailer.com.
Jim P.
2/6/2018
This jack is working great. It fit my boat trailer just as I had hoped.
by: Chris U.04/11/2016
I installed Fulton bolt on jack on pontoon. Best jack I have owned. Smooth operating gears and wheel rolls well. I also installed swing away tongue hitch. This was easy installation and solved my issues with pontoon being to long for shop door to close. Trailer pulls straight as ever with no play in coupling at all. Very satisfied with all e trailer products that I have bought over the years. THE ONLY PLACE to buy!!!
by: Chris S08/22/2014
I have a 17' Maverick Master Angler on a Continental trailer. The OEM jack has never impressed me so I upgraded to the FXP10 when I installed the Fulton swing tongue kit. The large wheel makes for easy movement around the garage and the smooth action on the crank makes raising and lowering the tongue easy.
by: Jim C.04/14/2014
Very happy with this trailer jack. I have used various brands but always find I like Fulton products the best!
More importantly, Etrailer is the closest thing I have found to in-store personal service on the internet. Live people making sure I was treated properly, got what I needed and asked for then followed through on delivery to be sure I had a good experience. Great Job Kelly S!
by: Steve08/12/2020
Replaced the original Fulton jack on our well-used 1988 trailer. It finally fell apart, but after 32 years, I felt it had led a good life! Hopefully the new one will be of similar quality and durability. I also liked that it had a grease gun fitting for easier maintenance. Easy to install.
by: Jon04/22/2015
Good jack, only downfall is it's a 2 handed or one hand one foot operation, if you go to lower the jack it will not go down, the wheel will only spin, when you hold the wheel with your foot or hand it goes down like it should, once it touches the ground it operates as it should and the wheel allows you to move the tongue around to line it up with the hitch. I wish it would go up or down without the wheel just spinning it would be the perfect setup
by: Robert05/17/2020
The order was filled and shipped in less than 24 hours. The product was in my hands in 4 days from placing the order. The web site was excellent and easy to use. This trailer jack replaced the jack that came with the trailer. I replaced the original jack because it was poorly located and required too much cranking to raise and lower it. This product enabled me to put the jack where I wanted it, raises and lowers quickly and pivots up out of the way while traveling. The jack is very solid, heavy duty and easy to install.
by: Robert02/15/2018
These jacks are so well built that I salvaged all the internal parts off of my old broken Jack to use as spare parts for this new jack if and when it ever needs them. They are extremely well built and I would recommend this to anyone needing a quality trailer jack.
by: Jared06/25/2015
These jacks are fine for the price. I've had several of them and there's not much to say other then I'll second another reviewer in that the wheel does spin while lifting or lowering. If you allow the wheel to spin before it his the ground, the jack won't work so you gotta keep it from moving with your foot. Big deal??? No not at all. Mine only last a few years before the parts get pretty tough to deal with but I'm not religious in my greasing so it may be partly my fault. I'm using this in salt as well. Good enough for me and I haven't found a better alternative.
by: Just The Maintenance Guy (Stan)08/24/2018
This is my first purchase from etrailer.com
This swivel marine jack FXP10 is heavy duty, way better than anything I could buy locally in the stores. Prompt shipping, installed it on our PWC trailer
which replaced the old worn out swivel jack. “Thanks” etrailer.com
I would recommend this swivel marine jack to anyone who is looking for a quality made product. You won’t be disappointed.
by: Gary B.12/22/2016
My FXP10 swivel jack arrived about three days after the order was placed. The jack and accessories were well packaged for shipment. Etrailer precise specifications and videos were very helpful in making sure that the jack would fit my trailer. The jack is very well made and the installation was simple. Very satisfied with this purchase.
by: John S03/01/2017
Nice heavy duty rolling jack for my teardrop trailer. The fixed one was too inconvenient, could not pull the trailer with the wheel attached. This one is perfect for my purposes. Short enough to position down with the trailer on the hitch, extends well past the hitch hight for easy hitch or unhitch. Just what I was looking for
by: Rich G.06/20/2015
I found the information and pictures online in just a few minutes. Wasn't sure what to expect but I found the FXP10 for my boat trailer and ordered it and when I paid I received an email the next day saying the product was already shipped. About three days later it was on my doorstep. It was the fastest shipment I ever had and it fit the trailer perfect. I will buy all my trailer products from etrailer forever.
by: Bob L10/02/2013
Product is great with large wheel and sturdy construction. The only issues were 1) the shipping clerk threw in the nuts and bolts into the botton of the shipping box. 3 of the 4 mounting bolts were correct and the same. The fourth was the same length and diameter, but the thread depth was different causing me to die the thread length. 2) Also, the large handle spacer was too long for the bolt provided, so that it had to be ground down about 1/2" to accomodate the small spacer. This handle bolt should not be confused with the incorrect bolt supplied in 1) above.
by: Don03/17/2011
Fulton XP10 better than original 2004 EZ 1000lb Boat trailer Jack.
Now 1200 lb with 1/2 inch pin. Easy to install.
Great service from Etrailer and good price.
Second order from them-first one was an electric brake control.
by: Jeff G.06/17/2016
I was very satisfied with this. It was easy to install and after a year of use still works flawlessly. This and all other products I have ordered from etrailer have always been great. Etrailer is always my first and last stop when looking for trailer parts!!
by: Bob V07/09/2014
Excellent trailer jack. Smooth cranking and rolls very easily making hook up a snap. I like the zerk for greasing the gears as well.
by: John 08/21/2022
Easy to install. Good quality construction. Gears and hoist tubes could have been lubed a bit better
by: Steve W08/06/2014
Sturdy unit. The one that came with the boat/trailer was only 1000lbs and eventually broke down. This one is rated at 1200 lbs and seems to be much sturdier. Easy to mount, service was punctual. Operates easily and smoothly. Couldn't ask for much more.
25
754
Show More Reviews
See what our Experts say about this Fulton Trailer Jack
- Replacement Bevel Gear Kit for Fulton Trailer Jack # FXP10You will need to look at the cap on top of the jack or at the bottom for model information. There are different gear kits available and you want to make sure to get the correct one. For Fulton jack # FXP10, the correct replacement gear kit is # F0933302S00.
view full answer... - Troubleshooting Fulton Jack that Handle Won't TurnI spoke with my contact at Fulton and he stated that what you are describing is a symptom of the jack screw inside the jack seizing up. You have a couple of options. First, you can try to take the jack apart and free the screw. If you cannot, the other option is to replace the jack. I have included a link to our trailer jack main page for you to view.
view full answer... - Replacement Trailer Jack for Dutton Lainson Jack of Ranger TrailerThe only trailer jack we can recommend that would fit on the same frame mount as your 2012 Ranger trailer that has a Dutton Lainson jack currently is another DL jack like with the part # DL24MR since all of the jack manufacturers use slightly different mounts. Typically the DL jacks work well so I would be inclined to believe that your jack had issues before you got it and the new # DL24MR would work well in place of it. If you did want to switch up the brand the Fulton part # FXP10 that...
view full answer... - Bolt On Swivel Trailer Jack Recommendation for a 6,000 lb 27 foot Boat TrailerTo determine the correct jack capacity for your boat trailer, you will need to know the tongue weight of the trailer. Once the tongue weight is known you can select a jack with a lift capacity that is equal to or greater than the tongue weight of your trailer. Typically tongue weights on boat trailers do not exceed 15 percent of the gross trailer weight capacity. Using this figure your tongue weight most likely will not exceed 1,000 lbs, (slightly more than 15 percent of 6,000 lbs) so...
view full answer... - Determining Correct Replacement Jack For 1999 R71 Ranger Boat TrailerBased on the pictures you provided it looks like the mount on your 1999R71 Range trailer uses a jack very similar to the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. You will need to confirm that this jack will be compatible by measuring the mount on your trailer. The # FXP10W0301 needs a mount that uses a 1/2" diameter mounting hole with pin holes that are 3" apart on center. If your mount has these measurements this jack will be an exact replacement. If your mount does NOT have...
view full answer...
- Recommend A Bolt-Thru Fulton 1200 lb Trailer JackI contacted our representative at Fulton. He informed me that the model jack you have referenced, may be the TJ507, as they do not have a record for the TJ5010101 jack. He informed me that the newer model jacks will not fit the older jack mounts. The reason this is, is that a few years back they redesigned the mounts as to make them fit better and rattle less. For you to install a new jack you would need to install a jack and use the mounting system the new jack uses, which many of the...
view full answer... - Replacement Jack Handle Recommendation for a 1980 Scamp Travel TrailerIn order to recommend a replacement handle that will work with the jack on your 1980 Scamp trailer I would need to know the brand and type of jack on the trailer. Jack handles are not universal items and are specific to certain jacks. If you have no way of finding what brand of jack that you have, then I would recommend replacing the entire jack. I would recommend going with a lower capacity jack like the Dutton-Lainson Swivel Jack, # DL22300. This jack will fit trailer frames up to...
view full answer... - Can Fulton Jack FXP10 Attach to 2x4 inch Trailer FrameYour trailer frame might be a bit too thin for the Fulton jack part # FXP10 to fit directly, but what you can do is use a metal spacer to make the frame a bit thicker so that the jack can attach to it. Or you can use the weld on bracket part # P9012-00 which will replace the bolt on bracket and allow you to attach the jack directly to the trailer.
view full answer... - Bolt-On Side-Mount Swivel Jacks for Boat TrailerIf you want to avoid the hassle of trying to match up a new jack to the old mount on your trailer you can simply bolt on a new side-mount swivel jack like the Fulton F2 # F1413040134. The swiveling F2 fits 3 x 3 and 3 x 4 trailer tongues, features rust-free aluminum construction, has a sturdy 3-inch wide wheel and includes a wheel stop. It is rated for 1600-lbs. This and all other bolt-on swivel jacks are shown on the linked page. If you wish you can send along photos of your jack and...
view full answer... - Mounting Plate Dimensions of the Fulton Swivel Jack part # FXP10I attached a picture that has the dimensions of the Fulton Jack part # FXP10 that you referenced.
view full answer...
- Recommended Replacement Jack For Ranger Trailer With Welded Plate With 5-1/2 x 3 Inch Bolt PatternThe bolt pattern that you referenced doesn't match any of our current Fulton Jacks. I reached out the my contact at Cequent who makes the Fulton jacks and they said that they do not have a replacement for that bolt pattern. If you don't want to replace your weld-on bracket, I recommend the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs, # FXP10. This is a Bolt-Thru mount providing the minimum deflection and maximum support. It has the Z-Max 600 zinc...
view full answer... - Recommendations For Replacement Jack With 1000 Pound Capacity and Tapered Collar BracketIt looks like the item you selected, Fulton Bolt-Thru Swivel Marine Jack, part # FXP10W0301, would be a good replacement jack. On the back plate of this jack there is a raised or welded on circular piece of metal, but by what you described I do not think it will work with your existing bracket. I browsed through the website using the specifications you provided for your jack, I found a jack that should work for you. The Fulton Bolt-Thru Swivel Marine Jack w/ Caster, part # FXP10, which...
view full answer... - Which Trailer Jack Do I Need for My 1994 Mastercraft Boat TrailerWe do have some options for you, however we do not have anything that matches the bolt pattern of your current jack plate. Instead of trying to match the bolt pattern of the welded plate you can get a bolt-on jack that uses U-bolts to connect to the trailer. Which jack you need will depend on the weight capacity and height of your current jack. You'll also want to make sure the U-bolts will fit around the trailer frame. I've linked our selection of bolt-on jacks for you. A few examples...
view full answer... - Recommended Swivel Jack For Boat Trailer With 5,000 Pound BoatYour tongue weight is going to be 10-15% of your trailer weight. With a 5,000 lb boat and assuming a tandem axle trailer weighing an average of 1,000 lbs that puts you at 600-900 lbs of tongue weight. This would allow you to use the Fulton Bolt-Thru Swivel Marine Jack # FXP10 you were looking at. It has a lift capacity of 1,200 lbs which will be more than enough. It has a bracket height of 14-1/2" retracted, 24-1/2" extended, and a 10" lift. However, my personal recommendation would be...
view full answer... - Replacement Handle for a Fulton # FXP10 Sidewind Swivel Trailer JackThe correct replacement handle for the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10 inch Lift - 1,200 lbs, item # FXP10, is the Replacement Sidewind Handle Kit for Fulton Marine Jacks - 800 lbs, F0933301S00. I spoke with my contact at Fulton and he assured me that this is the replacement handle for your 1,200 pound jack.
view full answer... - Replacement Fulton Jack for 1999 Javelin TrailerThe 1/2" pull pin like the one the # FXP10W0301 is their current standard. If you want to use the same mount I would try to see if the pin fits since there is only a 1/8" difference. If not, you could enlarge the hole slightly so the pin can get in there. If you don't want to mess with that the other option would be to get the Fulton Bolt-Thru Swivel Marine Jack w/ Caster # FXP10 and bolt it on next to the old mount.
view full answer... - Replacement Tongue Jack For A 2004 Ranger Trail Boat TrailerI am happy to point you in the right direction. According to the online owners manual for a 2004 Ranger Trailer CF5000 Z20 boat trailer, it uses a 1200 lb Fulton Swing Jack. They do not mention any other specs, but from what I can see, they use a snap ring mount, very similar to the Fulton Round, Snap-Ring Swivel Marine Jack # FTJ120W0301. This should match the current snap ring, if there is already one welded to the tongue. If not, we have the # FXP10 which has a bolt-on bracket for frames...
view full answer... - Will the Fulton Trailer Jack # FXP10 fit a 2 inch by 3 inch Trailer FrameYes, the Fulton Trailer Jack # FXP10 that you referenced can fit trailer frames up to 3" by 5" so it would work well on your frame that is 2 inch by 3 inch.
view full answer... - Fulton Magnum 1,200 lb Swivel Jack ReplacementI spoke with my contact at Fulton and if your current jack pivots on a 1/2" bolt then you can use either part # FXP10 for a 1,200 lb option or part # FXP15 if you wanted a 1,500 lb option. These come with a bolt on bracket that can fit a 3" x 5" trailer frame that you can either choose to use for mounting in place of your current mounting option or you can disregard the bolt on bracket and they will fit directly to your current bracket. Demonstration videos have been linked for you to...
view full answer...
- Replacement for Fulton Swivel Trailer Jack with Center BoltIt looks like you have a Bolt-Thru style Fulton Swivel Marine Jack therefore the correct replacement for you would be part # FXP10 which has a 1,200 lb weight capacity. This jack would then use the same mounting bracket you have now but it does come with an extra bolt-on bracket if needed.
view full answer...
- Replacement Frame-Mount Side-Wind Caster Wheel Jack to Replace Shelby 5876The Shelby trailer jack 5876 is a side-wind pull-pin side-frame-mount caster wheel swivel jack that bolts on to a trailer frame. We do offer plenty of options shown on the linked page but the one that I recommend is Fulton's 1200-lb-rated jack # FTJ12000101. I like this jack for its excellent value and since Fulton, part of Cequent Performance Products (makers of Reese, Draw-Tite and other quality brands), backs up their products with excellent customer support.
view full answer... - Replacement Wheel For A Fulton FXP Jack # FXP10Yes, The Replacement Wheel Kit # F6811S00 will replace your damaged wheel on your Fulton Marine Trailer Jack. The kit includes the wheel and all the necessary mounting hardware. The wheel capacity is 1,200 pounds. I attached a review video link below.
view full answer... - Difference Between Snap Ring and Bolt On Boat Trailer JacksA boat trailer jack that uses a snap ring works differently than one that is a bolt-on, like yours, because the mounting bracket for a bolt-on jack and snap-ring jack will be different. Because you have a Fulton 1,200 lb bolt-on jack, I assume your mounting bracket that is welded on accepts a bolt, like part # P9012-00. If this is the case you are going to want a compatible, bolt-on jack, which is the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301. This jack has a 1,200 lb capacity,...
view full answer...
- Replacement Swivel Jack Recommendation for a Ranger Trail Boat TrailerThe Fulton Bolt-Thru Swivel Marine Jack # FXP10 fits 3 x 5-inch trailer frames and comes with a bracket that we know matches the Ranger Trail swivel jacks like you have. I have attached a photo that shows the mounting bracket and the measurements between the various holes. You can compare these dimension to confirm the fit on your trailer.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Written by:
Lindsey S
Installed by:
Patrick B
Installed by:
Randy B
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Ryan F
Video Edited:
Chris R
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jd
2/2/2024
So far I have had no problems with the new jack. Still swivels easily and rolls smoothly on my shop floor. Has plenty of lift capacity for my 2000 lb boat.