bing tracking image
  1. Motorcycle Tie Down Straps
  2. Erickson
  3. S-Hooks
  4. Soft Ties
  5. 351 - 500 lbs
  6. Trailer
  7. Truck Bed
Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2

Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2

Item # EM05729
Retail:$31.03
Our Price: $24.57
You Save: 21%
Motorcycle Tie Down Straps
Shipping Weight: 1.52 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Secure your motorcycle or ATV to your truck or trailer with these tie-downs. Toothless cam buckles hold straps tight without damaging the webbing, and soft loops make it easy to attach the tie-downs to your bike. 1,200 lbs Max load. Fastest Shipping and Great prices for Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2. Read our customer reviews of Erickson motorcycle tie down straps. Call 1-800-940-8924 for expert service or order your motorcycle tie down straps part number EM05729 by Erickson online at etrailer.com.
  • All Info
  • Reviews (31)
  • Q & A (0)
  • Photos

Erickson Motorcycle Tie Down Straps - EM05729

  • S-Hooks
  • Soft Ties
  • 351 - 500 lbs
  • Trailer
  • Truck Bed
  • Erickson
  • 6 - 10 Feet Long
  • Cam Buckle Strap
  • 2 Straps
  • 0 - 1 Inch Wide
  • Manual

Secure your motorcycle or ATV to your truck or trailer with these tie-downs. Toothless cam buckles hold straps tight without damaging the webbing, and soft loops make it easy to attach the tie-downs to your bike. 1,200 lbs Max load.


Features

  • Tie-down straps let you secure your motorcycle, dirt bike, or ATV to your truck bed or trailer
  • Toothless, convenient, and secure (TCS) tensioning cam buckles will not damage strap webbing
  • Strap can be pulled to desired length, yet will not feed back through buckle while in locked position
    • Simply pull release tab to loosen tension
    • Locks and stays tight
  • S-hooks secure to anchor points


Specs:

  • Strap dimensions: 1" wide x 6' long
  • Maximum load strength (break strength): 1,200 lbs
  • Safe working load limit (WLL): 400 lbs
  • Quantity: 2 tie-down straps


Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.


Each of these motorcycle tie-downs has a toothless, convenient, and secure (TCS) cam buckle. The buckle has a non-slip spring-loaded locking action that allows for quick and easy adjustment. The toothless design will not damage the strap webbing. With the buckle in the locked position, the end strap can still be pulled through the buckle to desired length. At no time will the strap back up through the buckle. The patented design only allows the strap to go one way. To release the lock, you simply have to pull the release tab and the load will quickly let loose. Whenever you have a situation where you have 2 solid points that won't move, the TCS buckle with over-the-center lock action works great. It locks tight and stays tight.



05729 Erickson Manufacturing 1" x 6' Soft Tie TCS Motorcycle and ATV Tie Downs - 1,200 lbs. (Qty 2)






Customer Reviews

Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 - EM05729

Average Customer Rating:  4.1 out of 5 stars   (31 Customer Reviews)

Secure your motorcycle or ATV to your truck or trailer with these tie-downs. Toothless cam buckles hold straps tight without damaging the webbing, and soft loops make it easy to attach the tie-downs to your bike. 1,200 lbs Max load.

by:

Great products.



by:

Cargo bar works well. I either use it behind cab or in front of tailgate. Keeps items in place . I also have milk crates to use as cargo bins and the bar keeps that in place as well with tie downs from moving side to side.



by:

I want to like these but they fail to work. The cleat action is great yet they fail to hold. After I got the first pair they seemed a great product so I ordered a second pair and have since used them several times. Each time transporting a sport bike on a open trailer in a chock. Each time they worked loose in about 10 miles. I checked and rechecked mounting and closing. Still they fail to hold. This was in dry weather on smooth roads. I have had to stop multiple times on 40 mile trips to re-secure them. This seems to be all 4 of them and not just 1 out of the 4 failing. A bike carried along at the same using another brand strap remained solid. So simply, they fail. They are dangerous to use for securing as they cannot be trusted to hold. What can I do with them now? I am not sure I would even use them to secure a load/luggage on my touring bike Most likely I will throw them away as I can't trust them. It is a great design but the manufacturer needs to revisit the engineering and materials used to evolve the product or take them off the market.



by:

Not what I expected, but very secure and have a great loop on top end. They aren’t the regular cam lock pull to tighten straps, but the locking mechanism makes these very secure with no chance of slipping. Great straps!!

Todd W.

6/3/2022

Not good. They slip and allow bike to be loose. Dumb luck that a bike didn’t fall over.



by:

Easy to use, secured my son's dirt bike well



by:

The straps looked good at first but they did not hold the motorcycle at all. Had to use my older ratchet style. Almost lost bike off rack. Checked and re checked the tie down but the continually came loose. Thank goodness I had the ratchet straps.
In short they slip as you drive down the road.



by:

Like much better than the ratchet straps, easy install very stable and quick release



by:

These are nice straps. I like the design of the soft loop. But the cam mechanism allows too much slippage, so they become loose when am driving on rough roads. My motorcycle weighs about 350 pounds, and I transport it on a trailer. Maybe the cam mechanism is strong enough for transporting a motorcycle in a pickup bed, but I am not able to use the straps with my motorcycle on the trailer.



by:

I have used a number of straps around the house and on my trailers but none have been as easy to use while holding as tightly as these. If you want to hold something tighter than a pull strap but almost as good as a ratchet strap then these are the ones to get. I will order more. Service from etrailer is the best.



by:

Much like other recent reviews, I have had trouble with these straps. They come loose and I had to check and tighten them multiple times during transport. Now I have no confidence using them with my bike. I still use them for strapping down light gear on my trailer, but never with my motorcycle.



by:

Ordered 3 products on a Wednesday and received them the following Tuesday which was great. All products, the 5' E track, tie-off rings and tie down straps were just what I needed. I was glad that the straps were rated a 1200 lbs rather than 400 lbs. Just bought a 6 X 12 enclosed trailer recently and will definitely be using Etrailer.com a lot more.



by:

Honestly I am surprised to see good reviews for these. I was VERY excited to order them thinking they would be a good mix of pull-down and ratchet straps. Soon after I got them I had to pick up a dirt bike. I compressed the front springs some, pulled the strap tight and then locked the buckle. Seemed to hold very nicely ... until I was less than a mile away and the bike was almost falling over!!! After stopping 3 different times to retighten the straps, I finally gave up and put my trusty ratchets back on and had no further problems. Manufacturer states that it is IMPOSSIBLE for the strap to loosen ... that is obviously not the case. I bought 3 sets and have yet to even open the other 2 sets due to this experience. The quality seems nice, but the function is just not there. They may work OK for none dynamic loads, but they sure did not do the job against my stiff bouncing motorcycle suspension. I think the problem is that the rods in the buckle have no texture to grip the strap like pull downs usually do. Add some texture to help grab the strap and I think these could be really great.



by:

I gave one of their representatives the tire size and told them that I have duel rotors on the front wheel of my motorcycle and want would be the best fit for a wheel chock. They gave me Item MT70271 and EMO5729. I had them express deliver so that I would have time to mount it on my trailer. It was a great, the easiest to assemble and mount and had plenty of clearance for the tire and rotors. It was simple who ever designed this item had a lot of thought put into it to work so well. Great help and product . Thank You again.
Louie



by:

When I got the package I didn't quite know how to use the tie downs but after some experimentation found they work great. Thanks for a quality product.



by:

WowsersJust used these for the first time. Soooo much easier than regular tie downs with bar savers. I wish I had these ten years ago



by:

Great, really like the soft tie built in for hauling dirtbikes.



by:

Haven't used but looks good and ideal for carrying my motorcycle



by:

Wheels were what I expected.

Mike B.

11/20/2020

Doing the job as expected.



by:

Great price and great quality’n

Bobby

11/11/2018

Great’



by:

Very good service. Appreciate that shipment was held because my mailing and shipping were very different. I was called to make sure the order was mine and everything was correct.
Delivery was completed in less than a week.
Thank you for your great service.



by:

work great
easy to use
bikes only,
no cross over use



by:

Straps come lose within 15 minutes of travel. Completely unusable and dangerous.



by:

Satisfied with the product. The shipping time is outstanding...



by:

Great product. Works well with my TW200



by:

Easy to tighten, easy to release... good strength too.


25
31
Show More Reviews

See what our Experts say about this Erickson Motorcycle Tie Down Straps

  • Hitch-Mounted Carrier With Ramp For Scooter Or Motorcycle
    We have exactly what you are looking for. The Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long # UF48-979033 is a nice carrier that has proven to be a very useful when trying to transport small motorcycles or scooters. The weight capacity is 500lbs and it comes with a 37-1/2" long ramp to ease loading or unloading bikes. I recommend adding Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 # EM05729 to secure the bike to the carrier. It...
    view full answer...
  • Will Curt Hitch, # 31108, Fit On A 2007 Chevy 2500 HD And Hold A 250 Lb. Dirt Bike
    The Curt Front Hitch, # 31108, has a 500 lbs. tongue weight capacity. The hitch will carry the 250 lb. dirt bike, but you will want to check what the front Gross Axle Weight Rating (GAWR) is on your 2007 Chevy 2500 HD. You will not want to exceed the Gross Axle Weight Rating for your vehicle. We have the etrailer Motorcycle Carrier for 2 Inch Hitches # e98873, that has a 500 lbs. weight capacity. Also we have the Erickson Motorcycle Tie Downs, # EM05729. I am sending a link to the instructions...
    view full answer...
  • Compatibiltiy of Front Mounted Trailer Hitch on 2008 GMC Sierra 3500 Dually Not Cab and Chassis
    For your 2008 GMC Sierra 3500 dually, there are differences on many parts depending on if you have the cab and chassis frame or the Heavy Duty truck. There are also sometimes differences based on the SRW versus DRW on certain brackets for correct fit. It appears you are looking at the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65050 which is a fit for your 3500 Sierra Dually. It will require trimming and I've attached a photo to help with that. If you have a front...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • How To Transport A 50cc Scooter Moped On The Back Of Your Vehicle
    The best carrier to transport your 50cc scooter is the Ultra-Fab Motorcycle Carrier for 2" Hitches # UF48-979033. It has adjustable wheel mounts that allow bikes or motorcycles with small tires to be mounted without an issue. There are built-in tie down points for straps; I recommend adding Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 # EM05729 to secure the bike to the carrier. Since your Santa Fe has a 1-1/4" hitch you will need to use Hitch...
    view full answer...
  • How To Use Stabilizing Straps On The Curt Hitch # 13703 Mounted On A Komfort Travel Trailer
    The Curt Adjustable Width Trailer Hitch Receiver for RV, part # 13703, is designed to fit many frame styles on RVs and motorhomes. It can be attached to your travel trailer, but you will want to check with the trailer manufacturer to make sure your Komfort travel trailer can accept the maximum tongue weight of 350 lbs on this hitch. Since there will be significantly more bouncing at the rear of the travel trailer when it is being towed, the manufacturer (Curt) requires the use of stabilizing...
    view full answer...
  • Options for Carrying a Harley with a 1984 Pace Arrow Motor Home
    I would not recommend carrying a motorcycle with a hitch mounted motorcycle carrier on your 1984 Pace Arrow motor home. According to Fleetwood, your motor home has a maximum tongue weight capacity of 350 lbs. Your motorcycle and a motorcycle carrier will exceed the tongue weight capacity and could damage the motor home frame. Instead, I recommend using a small utility trailer and mount a wheel chock like part # TWSPWM. This would be the safest way to transport your motorcycle and it would...
    view full answer...
  • Trailer Hitch for 1995 Toyota 4Runner and Motorcycle Rack for a 2007 Husqavarna TE610 Dirt Bike
    The available trailer hitch for your 1995 Toyota 4Runner, is Draw-Tite hitch, # 75145. This is a Class III hitch with 500 pounds tongue weight capacity and 5,000 pounds gross trailer weight capacity. To find the towing and tongue weight capacities of your 4Runner, consult the owner's manual. I have included a link to the installation details below. For your 2007 Husqavarna TE610, you could use the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp , # UF48-979033. The carrier measures...
    view full answer...
  • Recommended Hitch Mounted Carrier for Vespa Scooter
    The Ultra-Fab # UF48-979033 carrier you'd looked at could work for you, if the tires on your Vespa aren't wider than 5 inches. One thing to keep in mind, scooters like your Vespa have a very strong weight bias to the rear. You'll want to load the scooter on the carrier so that the weight is evenly distributed, which means that the scooter will not be centered on the carrier, which is fine. You'll also want to ensure that the weight of your scooter plus the weight of the carrier (the...
    view full answer...
  • Will RackEm Removable Wheel Chock Work with 2009 Goldwing Trike
    The Rack'Em Manufacturing Removable Wheel Chock # RA-17 is a great choice and what I recommend for securing your 2009 Goldwing to your trailer. This wheel chock will hold tires up to 6-1/2 inches wide. You will need to add additional tie-downs like the Erickson # EM05729 to secure the bike into place, as you do not rely on the chock alone to safely support it.
    view full answer...
  • Wheel Chock for Transporting 2016 Suzuki Burgman Scooter in Ram Pickup
    The best fit is the Erickson # EM07506 Removable Motorcycle Wheel Chock. You will also need tie down straps like Erickson # EM05729.
    view full answer...
  • Fit and Compatibility of MaxxTow Carrier with a 2009 Yamaha Zuma 125 with a 2012 Toyota Sienna
    Great news! The etrailer carrier # e98873 you were looking at will be a good fit for your 2012 Toyota Sienna and Yamaha Zuma 125. I was able to look up your 2009 Yamaha Zuma 125 and found that the overall width was 30.1 inches, assuming this is the handle bar spread, the etrailer # e98873 will give you the clearance necessary to be compatible with your Sienna. What we know about the Curt hitch # C13105 you purchased earlier is that it requires a bumper clearance of 5-1/2 inches for your...
    view full answer...
  • What Motorcycle Frame Tube and Frame Width Do the B&W Biker Bar Motorcycle Tie-Down System Fit
    The B&W Biker Bar Motorcycle Tie-Down Systems we carry are only designed to fit certain models of Harley-Davidson and have not been tested for other bikes like your Kawasaki Vulcans. It is possible they can work with your bikes if they have double tubes but you will need to know a couple of dimensions, the frame tube diameters and the frame width. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 requires a frame tube diameter of 1-1/8" to...
    view full answer...
    Image 1 for
  • Removable Wheel Chock Options For A Dresser Harley Davidson
    I do have a few wheel chock options for you to consider however, none of which include a quick release function. For your Dresser Harley, I recommend using the Rack'em Manufacturing Removable Wheel Chock part # RA-17 as this unit will fit wheels up to 6-1/2" wide. I also recommend the Erickson Motorcycle and ATV Tie-Downs part # EM05729 to secure the bike. The best option to use would be our B&W Biker Bar Motorcycle Tie-Down System for Trailers part # BWMC2301 as this is a top of the...
    view full answer...
  • Solution To Carry Scooter With 2011 Ford Fusion Equipped with Class I Hitch
    Most of the scooter and cargo carriers require use with a Class III hitch. The reason for this is the combined weight of the the carrier and the scooter or wheel chair putting a great amount of torque on the hitch and vehicle frame. All of the hitches available for your 2011 Ford Fusion are Class I 1-1/4 hitches. What you could do is use a small utility trailer and mount a wheel chock like part # TWSPWM to the deck. You will want to make sure not to exceed the towing and tongue weight...
    view full answer...
  • Recommended Trailer Hitch Receiver, Adapter, and Motorcycle Carrier for 2019 Kia Sorento
    The Malone 2" Dual Purpose Hitch Receiver # MPG544 will give you 7-1/2 inches from hitch pin to hitch pin. Using an adapter will reduce the tongue weight of your hitch by 50% however, so you will need a hitch that is rated to handle that loss. I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98843 which is rated for up to 750 lbs tongue weight. Then I recommend using the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 77-3/4"...
    view full answer...
  • Will Kawasaki KLR 250 Fit MaxxTow Motorcycle Carrier and Mount to 2006 Ford F-150 XLT
    I did some research on your Kawasaki KLR 250 and found that it has a dry weight of 258 pounds, the width of the front tire is 3 inches, width of the rear tire is 4.6 inches, with a 55.7 inch wheel base. The etrailer, part # MT70101, has a capacity of 500 pounds, and has a track width of 5 inches. Yes, your Kawasaki KLR 250 will fit on part # e98873 just fine. To mount part # MT70101 to your 2006 Ford F-150 XLT you will need a 2 inch hitch installed if you do not already have one. For a...
    view full answer...
  • Best Way Carry Dirt Bike With 2008 Jeep Compass
    Although the Draw-Tite Class III # 75712 has a 525 lb tongue weight capacity, the capabilities of the hitch will be limited by the capabilities of the vehicle its installed on. If the vehicle manufacturers stated tongue weight capacity is lower than that of the hitch, you will need to abide by the lower rating. I cannot recommend exceeding Jeep's stated tongue weight capacity, as exceeding it could cause the attachment points between the vehicle and the hitch to fail. A better solution...
    view full answer...
  • Recommended Trailer Hitch Receiver And Tow Setup For Towing Motorcycle On Trailer
    For your 2013 Hyundai Sonata, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Class I # 24965. With this hitch, you will want the Sportframe Drawbar 2-1/8" Rise or 2-3/4" Drop 2000 lb Kit # 3593. This ball mount can use a 1-7/8 inch hitch ball like # 19256 or a 2 inch hitch ball like # 19258 to match your trailer coupler. For your trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118557. This has quick connects that connect...
    view full answer...
  • Will the MaxxTow Wheel Chock # MT70075 Fit a 2009 Honda Metropolitan Scooter
    I recommend the Tow-Rax Wheel Chock, # TWSPWM this wheel chock will fit tires up to 6-1/2 inches wide and is only 8-1/2 inches at its tallest point. Based on my research, the stock tires for the 2009 Honda Metropolitan are approximately 3-1/2 inches wide and 16 inches in diameter and should work well with this wheel chock. I also recommend tie down straps like the Erickson Soft Tie TCS Tie Downs, # EM05729. These straps will secure the bike while the wheel chock secures the front tire.
    view full answer...
    Image 1 for
  • Wheel Chock Recommendation to Carry a Honda CRF250L in the Bed of a Truck
    Since you want to install a chock in the bed of your truck I recommend something that is easily removable so the bed is clear when you need it to be. For that I recommend using Tow-Rax Removable Wheel Chock # TWSPWC with mounting hardware kit # TWPH2770 for metal floors. I have linked a video review of this chock for you. This does mean you would have to drill through the truck bed. I also recommend using handlebar straps # 06303 in conjunction with ratchet straps such as # EM05729 when...
    view full answer...
  • Recommendation For Hitch And Bike Rack For 2016 Beetle Convertible
    Based on your information, I recommend the Curt Class I Receiver Hitch, Item # C11354. It is a confirmed fit for your 2016 Beetle convertible. (But it does not fit R-Line models or those with the AdBlue DEF tank). It has a maximum gross trailer weight capacity of 2,000-lbs and a maximum tongue weight capacity of 200-lbs. No drilling is required and it mounts snugly with a bolt-on installation. Because of the unique design of your SmartScoot, especially its 22 inch width and three wheels,...
    view full answer...
  • Motorcycle Carrier For Stealth Hitches Trailer Hitch
    While you didn't mention the specific Stealth Hitches hitch, so long as the one you are looking at has the needed tongue weight capacity and is a 2 inch receiver, there is a motorcycle carrier you can use, from Ultra-Fab: - Ultra-Fab Dirt Bike Carrier for 2" Hitches # UF48-979033 While the # UF48-979033 says "Dirt Bike Carrier" it has a 500 lb weight capacity, 77 inch length, and inside track width of 5 inches, so as long as your motorcycle fits within those parameters it will work with...
    view full answer...
  • Hitch Recommendations for a 2007 Volkswagen Rabbit with a Dirt Bike
    The hitches for your 2007 Volkswagen Rabbit have only 1-1/4 inch hitch openings and a 200 lb. tongue weight. Your dirt bike weighs more than that, so your options are limited but I have a solution that will work for you. Please note that you will always want to check your owners manual regarding any towing restrictions or limitations for your vehicle. An alternative to a hitch mounted carrier would be to tow your dirt bike behind your vehicle using a utility trailer. I would recommend...
    view full answer...
  • Everything Needed for a 2006 Scion XB to Tow a Small Trailer Carrying a Motorcycle
    For your 2006 Scion XB, I recommend starting with the Curt Trailer Hitch Receiver # C11487. This is a custom fit and will use ball mount # C45521, along with pin and clip # F-4 and ball # A-82. The wiring harness for your vehicle is the Curt # C56030, which will connect to the factory wiring behind the trim panels in the cargo area on each side. Then you simply need your small trailer with a 2 inch coupler to match the hitch ball and you'll be good to go. You may want to consider a wheel...
    view full answer...


< Previous



Do you have a question about this Motorcycle Tie Down Strap?


Info for this part was:

Employee Leah B
Updated by:
Leah B
Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video Edited:
Chris R
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.