Motorcycle Tie Downs - Cam Buckle Straps with Shock Absorbers and Loop Straps - Qty 4

See what our Experts say about this ShockStrap Motorcycle Tie Down Straps

• Can I Use the Curt Hitch # C13701 to Transport a Motorcycle on a Travel Trailer?
  You will be able to use the Curt Hitch # C13701 as long as the combined weight of your motorcycle and the carrier are less than 500 pounds. Also, it is important to note that you should not exceed the weight capacity of your trailer. For this reason, I recommend making sure that your trailer can handle the amount of weight you wish to transport. Also, you need to make sure that your motorcycle carrier is rated for RV/travel trailer use. If you need a great carrier, I recommend the etrailer...
  view full answer...
• Hauling a 300LB Motorcycle With a 2009 Subaru Outback Wagon
  Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75560 will allow you to carry your 300lb motorcycle with your 2009 Subaru Outback Wagon. The receiver is rated for a maximum tongue weight of 400lbs and a maximum trailer weight of 4,000lbs. Be sure to verify the towing capacity with a Subaru dealer as your exact trim and options may vary the numbers. I recommend using a etrailer Anti-Rattle Hitch Stabilizer # e99007 to secure and remove excess play in the receiver on the Ultra-Fab...
  view full answer...
• Tongue Weight Capacity of Curt Class III C13207 Hitch for 2017 Ram ProMaster 3500
  The Curt Class III hitch you'd looked at, part # C13207 has a tongue weight capacity of 750 lbs. This means that the hitch receiver tube can safely withstand up to 750 lbs of downward force being applied to it. The hitch will fit a 2017 Ram ProMaster 3500 as long as it isn't the extended wheelbase model. As long as the bike and its carrier weigh less than 750 lbs, this hitch would work perfectly for you. If you don't already have a motorcycle carrier in mind, we offer a nice one as part...
  view full answer...
• Can EcoHitch 306-X7370 Installed on 2017 Audi S4 Sedan Carry 250 lb Dirt Bike
  As long as the combined weight of the dirt bike and the carrier you're using doesn't exceed the 525 lb tongue weight capacity of the EcoHitch # 306-X7370, the hitch itself will handle carrying your dirt bike just fine. The capacity of the hitch will be limited by the capacity of the vehicle, however. The actual capacity of your vehicle will depend on how its equipped, I saw towing capacities ranging from 3300 lbs for the 1.4L engine models up to 4200 lbs for A4 models with the 2.0L engine....
  view full answer...
• Will the the EcoHitch Trailer Hitch # 306-X7345 Work with My 2018 Honda CR-V?
  Yes - if you are looking for a hitch that can withstand a maximum of 300 pounds of tongue weight on your 2018 Honda CR-V, then the EcoHitch Hidden Trailer Hitch Receiver # 306-X7345 is a great option. The EcoHitch has a maximum tongue weight capacity of 525 pounds. However, with that being said, it is important to make sure that the tongue weight rating on your vehicle can accommodate that much weight. I recommend consulting your owner's manual for this rating. If you need a recommendation...
  view full answer...
• Does etrailer Motorcycle Carrier Have Longest Ramp
  There is not a longer ramp available than the 39-3/8 inch long ramp that comes with the etrailer Motorcycle Carrier with Ramp for 2" Hitch # e98873. This carrier has a 500 lb capacity so it will easily be able to haul your 300 lb V-Star, and if you do go with it you do have the option of adding a lock with the Threaded Anti-Rattle Hitch Pin Lock # e99047. The only other thing you will need are tie downs, the Motorcycle Tie Downs # SS6-SL14. I have added a link below to a video review...
  view full answer...
• Recommended Adjustable Ladder Rack For 2014 Ram 1500 5-1/2 Ft Bed With In-Bed Tonneau Cover
  The Adarac Custom Truck Bed Ladder Rack, part # A70450 may be a great ladder rack system for your 2014 Ram 1500 for a couple of reasons. First, it is not a permanent installation, and although it does use the stake pockets for installation, it will allow you to still use your inside the bed tonneau cover. Another nice feature is that you can remove the uprights and leave the rails in place. The uprights require 2 bolts for each leg that attach into the slotted holes on the rails when...
  view full answer...
• Comparing etrailer Motorcycle Carrier and Ultra-Fab Dirt Bike Carrier
  The etrailer Motorcycle Carrier # e98873 and Ultra-Fab Dirt Bike Carrier # UF48-979033 do have very similar designs as they are both intended to carry a motorcycle up to 500lbs. The both will fit a 2" receiver and include a ramp for easier loading and unloading. The etrailer Motorcycle Carrier # e98873 is the one I prefer as it has the outer tie down points, and the 40" diamond plate ramp. For me the longer, smooth ramp will make it easier to move the bike up and down the ramp. This carrier...
  view full answer...
• Transporting 2016 Ninja 300 on 2006 Porsche Cayenne Turbo with etrailer.com Motorcycle Carrier
  The etrailer.com Motorcycle Carrier w/ Ramp # e98873 that you referenced is a great solution for transporting your 2016 Ninja 300 behind the 2006 Porsche Cayenne. If the total length of your bike is just a few inches over the track's 76-1/4" length it won't be an issue, as the extra length would just be part of the tire beyond the platform like you mentioned. If you take a look at the attached image you will see how the bike is technically a bit longer then the carrier from end to end,...
  view full answer...
  
• High-Low Adapter for a Wheelchair Carrier on a 2004 Dodge Grand Caravan
  The rise, part # RM-076 will unfortunately lower your tongue weight too far and you won't be able to carry the wheelchair when installed. You're right in noting that the tongue weight of your hitch will be reduced by 50%, which would render the hitch incapable of holding the carrier and wheelchair. You can get a little creative though with the specific kind of attachment you're getting the rise from. A Curt Multipurpose Ball Mount, part # D210 doesn't have the same reduction in tongue...
  view full answer...
• Would the eTrailer Motorcycle Carrier Work with My Ebike Moped with a 4-Inch Tire?
  The etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 76" Long - Steel - 500 lbs # e98873 will fit your Ebike with four-inch tires. The pins on the bottom of the carrier will allow you to manipulate the carrier to the size of your tire. As far as the front wheel chock, if you wish to add one on as an accessory, it will require some drilling. If you are wanting to simply remove some pins from the carrier to have your wheel fit between the pins, that is a possible option as long as the...
  view full answer...
• Recommended Front Mounted Hitch Receiver and Motorcycle Carrier for 2019 Ram 2500
  The 2019 Ram 2500 will allow you to use the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31089 and then the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 77-3/4" Long - Steel - 500 lbs # e98873. This combination will allow you to carry your 400 lb motorcycle. I also recommend using the Motorcycle Tie Downs - Cam Buckle Straps with Shock Absorbers and Loop Straps - Qty 4 # SS6-SL14.
  view full answer...
• How Can I Carry My Micargi Cyclone On The Rear Of My Vehicle
  I do have a solution for you, but it will be with a different hitch bike carrier. My recommendation is the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 76" Long - Steel - 500 lbs, part # e98873. This rack comes with a ramp, to make it easy to load your bike. It also has a 500 lbs weight limit. You will need straps to tie down your bike to this rack. I am a fan of the Motorcycle Tie Downs - Cam Buckle Straps with Shock Absorbers and Loop Straps - Qty 4, part # SS6-SL14. Your bike...
  view full answer...
• Will The Ultra-Fab Motorcycle Carrier Transport a 2010 KTM 250 XC on a 2003 Nissan Xterra
  You should have no problem using this on a back of a 2003 Xterra as long as it has a 2 inch receiver hitch. Find the combined weight of the carrier (65 pounds) and the KTM 250 XC (215.20 pounds) and check the hitch markings and the Xterra owner manual to make sure it has at least a 290 pound tongue weight capacity. We recommend using ratchet straps, like part # SS6-SL14, to secure a motorcycle to these carriers. I do not know that you could securely attach a gas can to the rack. It would...
  view full answer...
• Using e98873 Motorcycle Carrier with 76112 Draw-Tite Trailer Hitch on 2019 Sienna
  The etrailer brand # e98873 motorcycle carrier weighs in at just below 60 lbs, so with the bike installed you'll be sitting at about 360 lbs of tongue weight which is well within the tongue weight capacity of the hitch, and is under the 380 lb tongue weight limit mentioned by Toyota, so the carrier, the dirt bike and the hitch should work well together. Here's a couple things you'll want to keep in mind: • You'll want to center the weight of the bike directly over the shank of the carrier...
  view full answer...
• Compatibility Of Draw-Tite Receiver 75699 Carrying a 228LB Dirt Bike on a 2021 Jeep Grand Cherokee
  Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75699 that fits your 2021 Jeep Grand Cherokee will be able to carry your dirt bike. The receiver is rated for a maximum tongue weight of 500lbs. Be sure to check your owners manual for the exact capacity of your Jeep and do not exceed the lower of two numbers. Even with the lowest capacity of the Grand Cherokees at 350lbs you will be able to carry your dirt bike. I recommend using the Ultra-Fab Dirt Bike Carrier # UF48-979033 with...
  view full answer...
• Trailer Hitch Receiver Capable Of Carrying a Motorcycle Behind a 2015 Toyota Highlander
  Yes, you can use the etrailer Motorcycle Carrier # e98873 with the Curt Trailer Hitch Receiver # C13394 on your 2015 Toyota Highlander. Be sure to include the weight of the carrier(58lbs) along with the weight of your bike and any Straps # SS6-SL14 (5lbs) used to secure it in place. Be sure to verify your receiver tongue weight along with ensuring you do not exceed the GVWR for your Highlander as well. Depending on the size of your bike you may need to add some Auxiliary Lights # C53201...
  view full answer...
• Can Draw Tite Hitch for 2007 Honda CR-V Carry Motorcycle Carrier
  The Draw Tite hitch part # 75547 has plenty of tongue weight capacity for carrying a motorcycle carrier. It has a 675 lb tongue weight capacity. If you are in need of a carrier we have the etrailer carrier part # e98873 which has a 500 lb weight capacity, has plenty of tie down anchor points, and comes with a ramp for easy loading. I attached a review video for more info as well. For a lock then you might want the # e99047 as well. Then for a cushioned tie down set the part # SS6-SL14...
  view full answer...
• Will a Yamaha Zuma Fit an etrailer # e98873 Motorcycle Carrier
  The etrailer # 98873 will accommodate a 49cc Zuma. Just make sure you are within the tongue weight capacity of the truck and the hitch. Remember tongue weight is the combined weight of the carrier, Zuma and anything in the Zuma. Make sure to use a good set of ratchet straps to secure the Zuma to the carrier. Part # SS6-SL14 would work pretty well.
  view full answer...

Do you have a question about this Motorcycle Tie Down Strap?