Snap-Loc Cam Buckle Tie-Down Strap w/ Strap Wrapper and S-Hooks - 1" x 8' - 500 lbs
(6 reviews)
Price: $12.18
In Stock
Snap-Loc Cam Buckle Tie-Down Strap w/ Strap Wrapper and S-Hooks - 1" x 8' - 500 lbs
Item # SLLS18CSR
Retail:$30.99
Our Price: $12.18
You Save: 61%
In Stock
- All Info
- Reviews (6)
- Q & A (0)
- Videos (2)
- Photos
Snap-Loc ATV-UTV Tie Downs - SLLS18CSR
- Cam Buckle Strap
- 351 - 500 lbs
- 6 - 10 Feet Long
- 1 Strap
- Snap-Loc
- S-Hooks
- Manual
- 0 - 1 Inch Wide
- Trailer
- Truck Bed
This sturdy tie-down with vinyl-coated steel S-hooks secures cargo in your truck bed or trailer. Cam buckle holds the strap tight over your payload, and strap wrapper helps prevent any unused webbing from flapping in the wind. 1,500 lbs Max load.
Features:
- Tie-down strap lets you secure cargo in your truck bed or trailer
- Hook-and-loop strap wrapper (similar to Velcro) keeps excess strap in place
- Helps prevent unused strap from tangling or flapping in the wind
- Cam-lock buckle holds strap tight over your gear
- Heavy-duty steel S-hooks are vinyl coated to help prevent scratches on your cargo
- Zinc-plated cam buckle resists corrosion
- WSTDA certified
- Made in the USA
Specs:
- Strap dimensions: 1" wide x 8' long
- Safe working load limit (WLL): 500 lbs
- Maximum load (break strength): 1,500 lbs
- Quantity: 1 cam buckle strap
- 1-Year limited warranty
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
Use this heavy-duty cam-buckle strap to help secure your cargo. Each end of the logistics strap has a vinyl-coated steel hook that can be attached to a tie-down point or hooked onto a ledge.
The cam grips the strap webbing to hold it in place and helps to adjust the strap length when you are securing your gear. When you want to loosen the strap, push down on the cam buckle to release the cam buckle's grip and pull the strap through. The cam buckle is zinc plated to resist corrosion. A hook-and-loop tie (similar to Velcro) helps to secure any extra strap length, so the excess strap doesn't flap in the wind as you travel down the road.
SLTHS108CR Snap Lock S-Hook Cargo Strap with Cambuckle - 8' - Red
Replaces SLLS18CSR
Video of Snap-Loc Cam Buckle Tie-Down Strap w/ Strap Wrapper and S-Hooks - 1" x 8' - 500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Snap-Loc S-Hook Tie Down Strap Review
Today well be taking a look at the Snap-Loc S-Hook Tie-Down Strap with Cam Buckle part number SLLS18 CSR. Now our cinch strap comes one inch by eight foot long and has two rubber-coated hooks, one on either end. Theres also a hook-and-loop strap that helps secure any excess strap once you have it pulled nice and tight or for storage. Now we can go ahead and go over how the Cam Buckle portion works. To tighten down the strap, you simply pull on this end. The Cam Buckle here grabs the webbing and doesnt allow it to pulled back through.
In order to release, you simply push in right here on the Cam Buckle, and then you'd pull back. Now lets go ahead and show you the strap in action. Now in order to protect the edges of our container here, were going to use some protective padding here. Well go ahead and slide the protective padding over our strap. Well go ahead and take one end of our strap, make a hook, go through our anchor point.
Well go ahead and take one section of our protective material and make sure it lines up with edge of the cart, take our other one for the other side of the cart and then well hook our other end of the strap to our other anchor point. With that done, go ahead and take the other end, it comes through the Cam Buckle and pull the strap tight. We then take our excess strap and bundle it up and then put it in our hook-and-loop section to keep it up out of the way. That will do for our look at the Snap Loc S-Hook Tie-Down Strap with Cam Buckle part number SLLS18 CSR. .
Customer Reviews
Snap-Loc Cam Buckle Tie-Down Strap w/ Strap Wrapper and S-Hooks - 1" x 8' - 500 lbs - SLLS18CSR
Average Customer Rating: 4.8 out of 5 stars (6 Customer Reviews)
This sturdy tie-down with vinyl-coated steel S-hooks secures cargo in your truck bed or trailer. Cam buckle holds the strap tight over your payload, and strap wrapper helps prevent any unused webbing from flapping in the wind. 1,500 lbs Max load.by: George 04/05/2023
Quality construction and durability. It’s a must have to tool to assist with installation of a trailer hitch
by: Michael 10/07/2020
Straps are well made, "S" hooks are sturdy, and buckle is more than adequate to hold the straps securely. Wish the material were thicker, but suppose I'd have had to order straps rated at more than 500 lb.
Service from etrailer was excellent.
by: Mike12/13/2016
Good product, GREAT customer service from Brittney!
by: mike10/15/2016
Excellent, wish it was a bit longer but it is a quality product
by: manny, koth10/13/2017
works as it should,
by: Lawrence 10/04/2022
6
6
See what our Experts say about this Snap-Loc ATV-UTV Tie Downs
- Recommended Cargo Carrier for Heavy Duty Snow BlowerFor a heavy duty snow blower, you will need to make sure the width of your tires and clearing width are accounted for when choosing your carrier. The larger snow blowers normally have a 27 or 28 inch clearing, so to give you a little maneuverability and a ramp that isn't too steep, I recommend the 32x48 Pro Series Steel Solo Cargo Carrier and Folding Ramp # PS10401-10402. This will make the loading and unloading of your snow blower easy. I recommend the Anti-Rattle Trailer Hitch Receiver...
view full answer... - Cargo Carrier Solution for Carrying 2 Small Dirt bikes and SnowblowerA cargo carrier with a ramp like the 32 x 48 Reese Steel Solo part # PS10401-10402 would be a really great option with more than enough capacity that would also be easy to load due to the ramp. The holes around the platform of the carrier would work great to attach tie downs to as well. Then for tie downs the part # SLLS18CSR would work great.
view full answer... - Hitch Adapter to Provide 1-1/4-Inch Receiver OpeningIt sounds like you want a hitch adapter with height rise that will fit into a 1-1/4-inch hitch and also provide that same size receiver opening for a 1-1/4-inch accessory. No such item exists but I can offer what may be a workable solution. The Brophy Trailer Hitch Receiver Adapter # HT5R does fit into a Class I or II hitch with a 1-1/4-inch receiver and provides 5-inches of height rise up to its 2-inch receiver opening. If you were to use this adapter along with a hitch reducer sleeve...
view full answer...
Do you have a question about this ATV-UTV Tie Down?
Info for this part was:
Updated by:
Leah B
Updated by:
Wilson B
Updated by:
Alex H
Written by:
Tricia G
Installed by:
Matthew K
Installed by:
Cole B
Video by:
Alan C
Video Edited:
Chad S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.