bing tracking image
  1. Lubricants Sealants Adhesives
  2. Loctite
  3. Sealant
  4. Gasket Maker
  5. 2.7 oz
Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube

Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube

Item # LT37464
Retail:$16.92
Our Price: $9.12
You Save: 46%
Lubricants Sealants Adhesives
Shipping Weight: 0.32 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
This gray silicone gasket maker forms a high-quality gasket that seals the space between matched parts to prevent leakage of automotive fluids and gases, such as air, oil, antifreeze and transmission fluid. Fastest Shipping and Great prices for Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube. Read our customer reviews of Loctite lubricants sealants adhesives. Call 1-800-940-8924 for expert service or order your lubricants sealants adhesives part number LT37464 by Loctite online at etrailer.com.
  • All Info
  • Reviews (20)
  • Q & A (0)
  • Photos

Loctite Lubricants Sealants Adhesives - LT37464

  • Sealant
  • Gasket Maker
  • 2.7 oz
  • Loctite

This gray silicone gasket maker forms a high-quality gasket that seals the space between matched parts to prevent leakage of automotive fluids and gases, such as air, oil, antifreeze and transmission fluid.


Features:

  • Seals joined parts in automotive systems - prevents leakage of antifreeze, air, oil and transmission fluid
  • Designed for high-torque applications
  • Exceeds manufacturers' warranty requirements
  • Won't corrode
  • Resists vibration
  • Made in the USA


Specs:

  • Quantity: 2.7-fl oz tube (80 mL)
  • Tack-free cure (time required to dry past tacky state): 30 minutes
  • Full cure (time required to reach full set): 24 hours
  • Temperature range (endurance limits of the gasket maker): -75 F to 625 F
  • Ideal gap-filling capacity (gap sizes in which gasket maker performs best): 0.001" to 0.125"
  • Maximum gap-filling capacity (maximum gap size between joined parts): 0.240"


Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps and thermostat housings



Applied as a gel to just one surface of the parts to be joined, silicone gasket maker forms a seal between them, keeping out contaminants. Silicone gasket maker resists oil and shop fluids, vibration, heat, and flexing of parts, replacing many conventional gaskets. Parts joined by this silicone gasket maker can easily be removed. The old gasket material comes off effortlessly, simplifying future disassembly and reassembly.


Because of their ability to flex and compress, silicone gasket makers work better than other kinds of gasket makers when the parts to be joined are made of different materials, which have different rates of expansion and contraction when temperatures change. They also work better than other types of gasket makers on stamped metal parts that can flex and in situations where clearances can be large.



OEM symbol

This product is OEM specified: It is approved to meet specifications of original equipment manufacturers.



491982 Loctite RTV 5699 - Grey High Performance Silicone Gasket Maker

Alternate part number: 37464

Installation Details LT37464 Installation instructions


California residents: click here



Customer Reviews

Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube - LT37464

Average Customer Rating:  4.9 out of 5 stars   (20 Customer Reviews)

This gray silicone gasket maker forms a high-quality gasket that seals the space between matched parts to prevent leakage of automotive fluids and gases, such as air, oil, antifreeze and transmission fluid.

by:

I used this to seal my hitch install. Ok so I over did it, but the seal Is excellent. One tube is plenty for the 2 holes drilled in the spare tire well. If fact you could do several. It just shy of a tube of toothpaste size to give some perspective.



by:

Thank you for fixing it promptly, I appreciate It. I have received the replacement.



by:

Great adhesive quality upon applying , not to fast drying so u can move items around to line up holes like I was for trailer vents on side in race trailer . Haven’t used the trailer yet since thr rainy season to see if weather affects the bond but can tell u the grip is fantastic as we scrapped one of the vents accidentally against a building roof overhang and it creased the metal vent but did not displace, pull or unseal the vent! I would use this to mount anything to thr exterior of my trailer without worry!



by:

Only bad thing I have to say about it is don't know if it was shipping or a factory defect but followed directions on package and cut nozzle to desired size and started squeezing it on my transaxle and the locktite started coming out of the side of the tube. So I'm out of half the tube.



by:

I received my product very quickly and in excellent condition! Every time I have ordered from E-Trailer, I have been extremely satisfied!

David P.

7/16/2016

I used the product right away after I bought it... havent used it lately. It worked excellent for me. .



by:

I used this product to repair a leaking auger gearbox on my snowblower. It was critical that when repairs were completed the two part gear case be sealed completely. The directions were simple/straightforward and the product was easily applied. I used the snowblower all winter and the gearbox seal was perfect.



by:

Worked and fit just like described, good deal.



by:

We use this product for creating gaskets where needed, and until now had no reasonably-priced supplier. We really appreciate your pricing and service. We had our last order of six units in three days!



by:

The product was shipped as promised. Product worked fine and was of satisfactory quality



by:

No problem !



by:

Great product! Great service!!



by:

Exactly what I needed for the job I was doing.



by:

Excellent product; can't find on store shelves. Pricing from this supplier is great.



by:

great stuff seals better then other bra nds



by:



by:



by:



by:

Rose was very helpful.

Thanks



by:

works fine. Good service.



by:


20
20

See what our Experts say about this Loctite Lubricants Sealants Adhesives

  • Is Locktite 5699 Gasket Maker. # LT37464 the Same as # 18718
    I searched the Loctite industrial site and the Locktite 5699 Grey Prod. # LT37464, is the same as the 18718 that you referenced. The product comes in different sizes containers and different container amounts to a case and the 18718 is just a variant of that.
    view full answer...
  • Availability of Gasket for Bargman LED Double Tail Light # 47-84-008
    Thank you for your purchase! I may have a solution for you but there is not a gasket available for the Bargman LED Double Tail Light # 47-84-008. We have spoken with Bargman in the past about this and they said that because of the design of the light gaskets are not used because they can actually trap condensation inside the lens that wouldn't have a chance to dry out. If you are concerned about moisture getting inside the assembly I recommend using a gasket maker like the Loctite #...
    view full answer...
  • Troubleshooting 5-Year-Old Electric Jack That Works Sporadically
    Your 5-year-old electric trailer jack working sporadically could indeed be caused by loose or corroded internal wiring inside the housing. The presence of rust on the screws certainly suggests the possibility that corrosion could be at the heart of the problem. You could also have a loose ground connection. Some A-frame jacks use their mounting plate to make the ground at the trailer's steel frame. Sometimes that mounting area can get rusty and create intermittent operation. The force...
    view full answer...
  • Thread Pitch on end of Loctite RTV 5699 High-Performance Silicone Gasket Maker part # LT37464
    I reached out to Loctite and they confirmed that the thread pitch and size on the tube of Loctite RTV 5699 High-Performance Silicone Gasket Maker part # LT37464 is a #20 neck finish thread.
    view full answer...
  • Is Drilling Needed to Install a Powered Trailer Wiring Harness in 2015 Chevrolet Malibu
    Routing the 12V power wire for a powered trailer wiring harness like the Tow Ready T-One # 118602 may require some drilling. Often there will be existing holes and/or wiring grommets that can be used but in some instances drilling a new hole will make the installation process easier. You just want to be very careful to check the area where you intend to drill to ensure there are no critical components behind it, such as other wiring, a brake line or a fuel line. If you do end up drilling...
    view full answer...
  • Available Products for Sealing RV Sink Drain
    If the sink in your 1996 Jayco pop-up camper trailer is leaking where the drain and sink bottom join together then you can use plumber's putty to re-seal it unless something is actually broken. This material is typically grey in color and can be found at any local hardware store. It remains soft and flexible (it does not dry or cure to a solid condition like a glue or caulk) so it keeps a good seal. If you also need to seal the sink's outer mounting flange to the countertop you can usually...
    view full answer...
  • Replacement Gaskets For Trailer Light Lens
    The gasket behind that lens is not a manufacturer replacement part. I recommend using the Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube # LT37464 to make your own gasket.
    view full answer...
  • Can Trailer Wiring Harness Power Wire be Ran through Firewall on a 2010 Lincoln MKT
    If there isn't an easily accessible point of entry into the engine compartment through the firewall on your 2010 Lincoln MKT then you will need to drill a small hole to run the wiring harness power wire. There are a couple of things to be aware of. First, be careful that the other side of the firewall is clear. And second after making the hole and route the wire through it be sure to seal it up with silicone such as # LT37464.
    view full answer...
  • Does Edge Juice with Attitude EGT Probe have to be Installed on 2016 Ram 3500 Diesel
    The EGT probe included with the Edge Juice with Attitude # EP31507 installs in a different location than any factory sensors so I do recommend installing it on your 2016 Ram 3500. Routing wiring through the firewall can be a challenge but if you can run it through that grommet you mentioned then that is the best option. Once the wiring is ran it is recommend to seal it up using silicone such as # LT37464.
    view full answer...
  • How to Install the Blue Ox Tail Light Wiring Kit on a 2017 Jeep Wrangler
    In order to install the Blue Ox Tail Light Wiring Kit part # BX8869 in the back of the taillight housing on your 2017 Jeep Wrangler you will need at least 1" of space in order for the bulb and socket kit to work. I did some research and looked at a few of the taillight assemblies for your Jeep and believe you should have absolutely no problem using this kit. 1) Starting in the engine compartment of the towed vehicle, run the 26 ft. harness through the fire wall, under the driver's side...
    view full answer...
  • Mounting Hardware is Not Holding the Lend-a-Hand # AM-200 on a 2011 Rockwood Ultra Lite
    Yes, it sounds like you need to install some anchors for your Lend-a-Hand # AM-200 or simply remove all of the hardware and move the mounting location up or down a few inches to avoid using the same holes. If you do move the Lend-a-Hand then you want to make sure that you are installing the screws into a stud and that you patch up the previous mounting holes with sealant like part # LT37464. It might be easier to move the hand rail location but since both options are fairly easy it really...
    view full answer...
  • RTV Sealant Recommendation for Oil Seal for Dexter Axles
    The Unitized Oil Seal # 10-51 would require that you apply RTV like part # LT37464 to the outer diameter of the seal before you install it per Dexter's seal installation instructions. This seal is designed as a replacement for Dexter 9K and 10K axles.
    view full answer...
  • Can a Roof Cargo Box Have Thule Hardware Installed to Fit Wider Crossbars
    We have recommended in the past for people in similar situations as yours to modify their boxes and install the Hardware part # TH04997 which has much wider U-bolts compatible with factory and aftermarket aero style crossbars. You basically would have to drill new holes in the box and then use all of the included hardware to secure the mount kit to the box. You will want to space the holes that you drill in the box the same distance apart as the crossbars of your roof rack. For sealant...
    view full answer...
  • Availability of Cargo Trailer Strap Hinge with Mounting Hole Spacing of 4-1/4-Inches
    I checked the dimensions of all of the strap hinges we offer; all can be seen on the linked page. One of these, Redline part # 2512, did not have the mounting hole spacing noted on the product page so I pulled one from stock so that I could get that information for you. The hole spacing is noted on the linked photo that I have prepared for you. None of these hinges has the exact spacing you're looking for, I'm afraid. If you do end up using an alternate part and have to drill a new hole...
    view full answer...
    Image 1 for
  • Thule HideAway Awning Installation on 2015 Forest River R Pod
    The Thule HideAway Awning - Direct Mount - Waterproof - 80 sq ft # TH490011 will mount directly to the side of your 2015 Forest River R-Pod trailer with the included mounting brackets and hardware. It will require drilling directly into a stud/support location to give you the weight support needed. I recommend using silicone in the locations where you install the brackets as outlined in the attached instructions. You can use either # 0160297 or a silicone gasket maker like # LT37467...
    view full answer...
  • Bore Sealant for Trailer Oil Seals
    RTV high temperature silicone is what you are looking for. So something such as # LT37464, # LT37467, or # LT37466 would work for you. This is for oil seals that have metal on the outsides like # 91030. No sealant can get on the rubber parts. Just a little bit all the way around should be all you need.
    view full answer...
  • Does Replacement Lens for Peterson Tail Lights # 440-15R Come with a Seal
    The replacement tail light lens # 440-15R does not come with a seal. You would either need to retain the old one or you could make your own using some thin foam. Another option, which would be more permanent, is to use gasket maker like # LT37464.
    view full answer...
  • Mounting Method for Stromberg Carlson Extend-A-Shower RV Shower Curtain Rod EXT-3542S
    The Stromberg Carlson Extend-A-Shower RV Shower Curtain Rod # EXT-3542S weighs under 3-lbs and even with the small additional weight of the shower curtain itself should be fine for installation in your shower even if a wall stud or other structural member is not available at the mounting point. It would obviously be better to have such a mounting point to install just about anything on an RV but the included 2-inch stainless steel mounting screws will work for most applications. I would...
    view full answer...
  • Is Rear View Safety Wireless Side Camera Waterproof, Installation, and Can Signal Booster be Used
    I did a little digging and found that the Rear View Safety Wireless Side Camera # RVS-775W as a whole carries an IP68 rating. The 6 indicates that it is dust tight meaning dust cannot get in. The 8 indicates continuous immersion in water at a depth of 1 to 3 meters for a given amount of time. So what all that means is that rain or washing the RV will not cause water to get inside the unit and it will function properly. Unless the camera is submerged deep under water and/or underwater for...
    view full answer...
  • Compatibility of Locktite 569 on Portable Water System
    The Loctite RTV 5699 High-Performance Silicone Gasket Maker - Grey - 2.7-Fl Oz Tube # LT37464 can be used to seal a portable water system. The only thing to consider is the use of the water. If it isn't for potable drinking water, you wouldn't have any issue with this gasket maker. There are number of Loctite options available for potable drinking water but unfortunately we do not carry any of those options. If you are using threaded connections, I recommend using the Valterra PTFE...
    view full answer...
  • What Sealer Is Used For The Kodiak XL ProLube Kit # XLPROLUBE1980KIT?
    The Kodiak XL ProLube Kit # XLPROLUBE1980KIT no longer requires the sealant like you saw in the instructions. If you prefer to use some the Loctite # LT37464 is all you will need as the manufacturers still recommends using some sealant to reduce the likely hood of issues down the road. This helps to prevent oil leakage as the different materials expand and contract due to heat.
    view full answer...
  • Gasket Options for the Bargman Triple Tail Light
    The best recommendation I could make would be to use a gasket maker like the Loctite Silicone Gasket Maker part # LT37464. I wish we carried a gasket specifically designed to work on the Bargman Triple Tail Light # 30-84-509 that you referenced but we do not.
    view full answer...
  • Gasket Availability for the Bargman Triple Tail Light # 47-84-009
    The best recommendation I could make would be to use a gasket maker like the Loctite Silicone Gasket Maker part # LT37464. I wish we carried a gasket specifically designed to work on the Bargman Triple Tail Light # 47-84-009 that you referenced but we do not. I have spoken to my contact at Bargman about this before and they told me that gaskets aren't used for these assemblies because if they are used they can trap condensation in the lens and it won't dry out. Without the gasket air...
    view full answer...
  • Recommended Silicone Sealant for Installing Optronics RV Porch and Utility Light RVPL7CB
    The Optronics RV Porch and Utility Light # RVPL7CB has a full-size metal backing plate that will protect the internal electrical components from moisture but if you like you certainly can use a thin bead of silicone rubber sealant like # LT37464 (grey), # LT37467 (black) or # 0160297 (white) around the perimeter of the base to provide additional protection. Hardware stores usually carry a range of color options including clear silicone.
    view full answer...


< Previous



Do you have a question about this Lubricants Sealants Adhesive?


Info for this part was:

Employee Raymond P
Written by:
Raymond P
Employee Michael H
Expert Research:
Michael H
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.