Replacement Weld-On L-Bend Bracket for Bulldog and Fulton Snap-Ring Swivel Jacks
(8 reviews)
Price: $19.88
In Stock
Replacement Weld-On L-Bend Bracket for Bulldog and Fulton Snap-Ring Swivel Jacks
Item # F500242
Retail:$45.95
Our Price: $19.88
You Save: 57%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (8)
- Q & A (0)
- Photos
Bulldog Accessories and Parts - F500242
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Bulldog
Replaces the L-bend installation bracket for your Bulldog or Fulton snap-ring swivel jack. Welds onto your trailer's frame to provide attachment point for your jack.
Features:
- Replaces the L-bend installation bracket for your Bulldog or Fulton snap-ring swivel jack
- Welds onto your trailer's frame to provide attachment point for your jack
Specs:
- Dimensions: 4-1/8" long x 4-1/4" tall x 1-1/2" thick
- Distance between pin holes (center to center): 3"
- Snap ring hole diameter: 2-1/2"
- Quantity: 1 swivel jack installation bracket
Fits:
- Bulldog snap-ring swivel jacks: BD151109, BD151101, BD151464, BD151460, BD171401, BD151421, BD151401, BD171412, BD151443, and BD151110
- Fulton snap-ring swivel jacks: FTJ120W0301, F1410050149, and FTJ12000101
500242 Replacement Weld-On L-Bend Bracket for Bulldog and Fulton SnapRing Swivel Jacks
California residents: click here
Customer Satisfaction Score:
82% were satisfied with this product
18% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Weld-On L-Bend Bracket for Bulldog and Fulton Snap-Ring Swivel Jacks - F500242
Average Customer Rating: 4.9 out of 5 stars (8 Customer Reviews)
Replaces the L-bend installation bracket for your Bulldog or Fulton snap-ring swivel jack. Welds onto your trailer's frame to provide attachment point for your jack.by: Shadow8308/26/2023
Operates as advertised. No problems. I used this to replace the same jack that wore our after 30 years of use.
by: Jeffrey08/29/2023
Just the part I was waiting on.
by: GP09/01/2017
Purchased the Bulldog bracket to enable us to install a metal wheeled trailer tongue jack. If not for the bracket we would not have been able to install the heavy jack to easily move the trailer. The bracket fit perfect and was extremely reasonably priced.
by: Doug 06/04/2021
Came sooner than expected, quality of item better than originale. I definitely recommend etrailer.
by: Dan09/29/2018
Great help fast service.
by: Jack 07/14/2023
by: Cecil10/06/2020
by: Sam 07/23/2021
8
8
See what our Experts say about this Bulldog Accessories and Parts
- Recommended Swivel Marine Trailer Jack W/ Wheel That Mounts To 2.49" Male Tube Via Snap RingBased on the description you provided of your current trailer jacks mounting bracket it sounds like you have a jack similar to the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301. This jack is attached to the trailer via a L-bend bracket # F500242 which has an outside diameter of 2-1/2" and uses a snap ring to secure the jack. If your trailer has a mounting bracket that looks like the # F500242 then you can use the # FTJ120W0301 as...
view full answer... - What Size Mounting Bracket Will the Bulldog Round, Snap-Ring Swivel Jack # BD151110 Fit? To verify fitment of the Bulldog Round, Snap-Ring Swivel Jack # BD151110 on your trailer you will need to measure the diameter of the Bracket # F500242 on your trailer. The diameter of the outer part of the bracket needs to be 2-1/2" for the Bulldog jack to fit. It is held in place with the Snap-Ring # BD500241 if any of your snap rings are going to need to be replaced.
view full answer...
- Recommended Bolt-On 2,000 Pound Swivel Jack for TrailerThe Bulldog Round Snap-Ring Swivel Jack # BD151464 referenced in your question is indeed a weld-on trailer jack. It is designed to mount onto the Weld-On Bracket # F500242 with the Snap Ring # BD500241. For a similar trailer jack that uses a bolt-on bracket, I recommend looking at the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303. This 2,000 pound jack has a total lift of 10 inches and an outer tube diameter of 2-1/4 inches. The bolt-on bracket, mounting hardware and footplate...
view full answer... - Replacement Weld on Mount for Bulldog Swivel Jack # BD171401 For just the replacement mount for the Bulldog Swivel Jack # BD171401 you'd want the # F500242 and you'd be set.
view full answer... - What Kind of Finish is on the Outer and Inner Tubes of Bulldog 2K Round Swivel JackI did some checking with the manufacturer and found that Bulldog trailer jack # BD151464 is painted gray on the outside and the inner tube is zinc-coated for corrosion resistance. To mount this jack you would have to weld-on bracket # F500242 and use snap ring # BD500241.
view full answer... - Does the Bulldog Round, Snap-Ring Swivel Jack item # BD151110 Pivot Right and Left?The Bulldog Round, Snap-Ring Swivel Jack item # BD151110 can swing both right and left. You can even mount it upside down if you have enough clearance. It rotates every 90 degrees on the bracket. This allows you to place it on the right or left side of your trailer and have it pivot towards your vehicle or away. You will need the L-Bend Bracket for Bulldog and Fulton Swivel Jacks item # F500242 to attach it to your coupler.
view full answer... - Availability of Swivel Bracket that Mounts to Trailer Frame for Fulton JackSounds like you are looking for the part # F500242 which is a swivel mounting bracket for the trailer side of a Fulton Jack like the part # FXP10W0301.
view full answer... - Swivel Trailer Jack With 2-1/2" Opening for Snap Ring Mounting BracketFor your application we have the 2K Bulldog Round, Snap-Ring Swivel Marine Jack # BD151464 which fits with the L-Bend Bracket # F500242 that has the 2-1/2" opening you mentioned (see attached photo) and secures using the Snap Ring # BD500241.
view full answer...
- Easy To Load Bike Rack While Towing a T@B TrailerThe best option I have for you to carry a bike while pulling your T@B Trailer with a 2015 Ford Edge is to place it in between the trailer and vehicle using an adapter, the Curt Multipurpose Ball Mount part # D210. This adapter would then allow you to place a bike rack in the upper receiver tube portion all while using the lower ball mount platform to continue towing your trailer. If you only have one or 2 bikes then I recommend the Kuat Piston Pro X Bike Rack for 2 Bikes - 2" Hitches...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Steven C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.