Replacement Sidewind Handle Kit for Fulton XP15 Series Marine Jacks
(105 reviews)
Price: $24.36
In Stock
Replacement Sidewind Handle Kit for Fulton XP15 Series Marine Jacks
Item # F0933305S00
Retail:$35.20
Our Price: $24.36
You Save: 31%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (105)
- Q & A (0)
- Videos (2)
- Photos
Fulton Accessories and Parts - F0933305S00
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- Fulton
Replaces the sidewind handle for your Fulton XP15 series marine jack. Crank handle, pin, and bushing included.
Features:
- Replaces the sidewind handle for your Fulton XP15 series marine jacks
- Designed for use with Fulton marine jack models XP15 0101, XP15W 0301, XP15L 0101, XPD15L 0101, HD25000101, and HD50000101
- Kit includes crank, pin, and bushing
Fits:
- Fulton XP15 marine jacks: XP15 0101, XP15W 0301, XP15L 0101, XPD15L 0101, HD25000101, and HD50000101
0933305S00 Fulton Handle Kit for Marine and Recreational Jacks XP15 Series
California residents: click here
Video of Replacement Sidewind Handle Kit for Fulton XP15 Series Marine Jacks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Fulton 2500HD Trailer Jack Rebuild
Today we're going to be taking a look at how to rebuild the Fulton 2500-HD Marine Style Square Tube Jacks. Now these jacks are not that inexpensive and it's nice that we have a lot of individual components here so we can replace whatever is broken. We don't have to worry about going out and re-buying a completely new jack. We'll start here at the top, you see we've got a black cap that's held on by two screws. We offer that right here as a replacement part. That's going to be part number F0917504. Also, we're going to have our handle kit here.
It's got a flanged bushing and then there's a pin located inside that goes to the gear. Our handle is part number F0933305S00. Again, it's going to be our handle, our flange bushing and our pin. As we work our way down just a little further we're going to have our gear kit. Now our gear kit has some nice extra components.
It's got the extra bushing, threshed washer that's going to go down on top. It's got the spacer that's going to go between our gear. It's going to have the base pin, it's going to have the handle pin and then our lower and our side gear and it also comes with two new of the flange bushings just in case we need them during that rebuild. Now once we get below that, we're going to have our bearing. You'll see this is kind of a sealed bearing on the top. It's got a cap on it.
You want that to be facing up and that actually helps to make the water shed off of the bearing and that's going to ride on top of this threshed washer here, or threshed bearing there. You can see it's going to turn really nice and smoothly and that basically alleviates all of the friction that we have in our jack and it's going to help it to operate really nice and smoothly. There are going to be four bolts that hold the jack into place with a backing plate. If you've had any damage at all done to those, we do sell those as a replacement part as well. That part number is F500286. The first step is going to be get our cap off, that's going to sit over top of the gears and the bearings located inside. Use a quarter inch socket or bit driver or even a flat blade screwdriver if you want and once we have one backed out on the side, we'll kind of push up on that side, you can see the other one is just going to fit around that grease cert.
Inside there you'll see our gears, you're going to see the grease that came on it from the factory. We're going to wipe all of that out of the way and show you how to rebuild this. Now when you put everything back together, just want to make sure you use a good all purpose grease. It doesn't have to be a high temp grease or anything like that but you do want to make sure that it's good all purpose grease. Now with most of our grease out of the way, if we turn our handle, you're going to see two half moon cut outs. We've got one there and if I move the handle you can actually see the pin move up and down there. And then directly on the other side we'll have our other one. What I'm going to do is use a five-thirty-seconds punch. We'll line it up with that pin and I want to drive that pin down, once we have it started, we'll tilt it and then kind of drive it right over on that angle. We'll know it's fully out when we can move this handle up and down. Lift our handle out there. Now at this point if we're just replacing the handle, we can put that new one back down in. We'll line up our holes, put our pin back in and replace our cap so it's pretty straight forward. Now we're going to go a few steps further so let's rotate it over here. You'll see our gear laying here on the bottom. We'll take that out. Now both of our gears are going to be the same, for the bottom we're going to use the enclosed area for the pin to sit in and for our handle, we're going to use the pass through area. That base pin is just a little bit bigger but the gear is just going to sit right down on top of it. You can also see we've got that bushing there, which is one of the replacement parts and you've also got this small washer. Now this you're going to reuse. It doesn't really experience any wear. Just lift up on that base gear there. You can see it's going to come right off, again just the same thing as what the side gear was. Of course, these are brand new parts we're pulling out here. Your grease probably is going to look as nice and if you're replacing parts, one of them is going to show signs of failure. These are brand new, we're just going to replace them and put them right back in and put some new grease in and we'll be ready. You can see that base pin right here. We also have that as a replacement. That just floats, it just sits in the middle here. Now we're going to slightly pull the inner tube, the inner square tube which would be kind of what your drop leg is attached to and we're going to separate it from the outer tube. You see how that screw as I pull out on that, it's going to slide out. It's going to allow that plate to drop down. We're going to set it aside. On top of that plate, there's that flat washer and remember that's going to come in the gear kit replacement if you need to replace that. Then right down there we have that threshed washer and also our bearing. Now we can lift up our outer tuber here and that'll give you a good look at actually how the mechanism works. You see there's this screw and that just pushes down or pulls up on that leg causing it to go in and out of the jack so it's really, really hard to mess this up. This is a super strong screw where typical points of failure are going to be either the bearing or the gears or something like that. So let's go ahead and make sure we get some grease around screw there and we can start putting this thing back together. You're going to start by placing the threshed washer down on the screw and follow that up with our bearing. Now it's time to put our top plate in. One slot on the jack is going to be much wider than the other. We want to put the thicker part facing outward. You can see that thinner part, that's going to face inward. Just get it slid into position and you can see it's going to engage on that side. We can start the outer tube right back down over the inner tube and if we watch inside there, we'll see the screw is going to pass right through that plate. Now we're going to take our washer or threshed bearing and place that down on it. Once that's in place, we can slide that larger diameter pin in. Now this is just what they call like a floating pin so it's not going to take a bunch of force to get it in place. You just want it to be pretty much equal on each side that we can see exposed. Now we'll take one of our gears, we want to use the enclosed portion. We don't want to use the full pass through opening. We want to use that one and we'll slide that down and on, being sure that that engages the pin and you should notice that it's engaged because it doesn't turn freely. It has some tension to it. Put some more grease down in there. You remember we had our bushing, had that little washer on it so we can that put in position. Make sure that washer stays lined up. The grease is nice because it helps hold it in place and we're going to start to slide our handle through and as we do we want to have our gear kind of lowered down so it's lined up with our bushing. It's going to slide right on through. You can see kind of part of that hole there. We'll just rotate our jack so we can see half moon in the gears is going to line up with the hole that's in the handle. Now we just need to replace that pin that we drove out earlier. All right, we just want our pin to be about equal on either side. Doesn't necessarily have to be square but you do want it to be engaged fully so you have some tension on that pin. Now another little helping of grease, we'll work that around our gears there. Now one side of our cap needs to go around that grease sert. Other side, push down in. Now we can just reinsert that self-tapping screw. That's all there is to it. It only takes a few minutes and a few inexpensive parts and we can go through a complete rebuild process on a jack rather than actually having to purchase a brand new one. That will complete today's rebuild of the Fulton HD 2500 Marine Jack.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Sidewind Handle Kit for Fulton XP15 Series Marine Jacks - F0933305S00
Average Customer Rating: 4.8 out of 5 stars (105 Customer Reviews)
Replaces the sidewind handle for your Fulton XP15 series marine jack. Crank handle, pin, and bushing included.by: Jason Hart04/24/2023
Got me exactly what I needed to get going! And a video showing me how to reassemble it, too. Thanks!
by: Philip05/02/2018
OEM replacement got my boat trailer back in action thanks to in part to prompt shipment.
Thanks etrailer!
by: Dan08/26/2022
Quick shipping ANF order perfect
by: Dave P.01/21/2016
Another easy fix for me from e trailer. Not thinking I hooked my trailer to a bumper hitch for a quick move of the trailer. The bumper hitch put my tongue jack close to the truck. Backing up I broke off my crank handle on the bumper. Ordered a new replacement handle from e trailer. Arrived as scheduled today. I installed it in 15 minutes and it works great. The price was the best I had found also. I will always use e trailer for all my parts as usual.
Dave P.
1/20/2017
Still going strong as new.
by: Teri K10/14/2016
Thanks for the speedy delivery. When we got home and went to put the boat in the garage we noticed we lost the sidewind handle to the jack. As my husband got the boat set up in the garage (on blocks), I immediately got on the internet and found what I needed at your site. I bought it with ease, and received the handle kit in a couple of days. Thanks so much. It got mounted with no effort at all. It is always a pleasure doing business with you.
Thanks !!!!!!
Teri K.
10/14/2017
It is still working great!! Thanks
by: Steven10/04/2022
I may have an older Fulton Jack but I had to modify the gear that the new locking pin fits through. The new pin was obviously bigger than the old pin. It would be nice to have a new gear included. The old smaller pin broke and the handle departed the jack on my way home from the lake. The larger pin shouldn't break--so good fix.
by: Ronald S.08/24/2015
etrailer did a very very good job getting it to me in a timely manner as always .I should know because this my second or third time I've ordered this same item. I can tell you this don't back or turn to sharp if you or driving a golf cart you will wipe out the crank ever time.
Thanks etrailer
Ronald S
Ronald S.
8/24/2016
it is working real good as always .
by: alan c08/24/2014
product worked fine. There were no specific instruction for installing these parts. Not as easy to install and there were extra parts for round verses square frame jacks. Again specific installation instructions for these parts are needed. Erica got me the right parts thank you.
Alan C.
8/20/2015
New jock great tebuild parts were not as eazy to install. Instruction could be better.
by: Joe07/20/2019
I have 2006 Fulton Magnum Series Jack. This handle fit like a glove. Awesome customer service!
Joe B.
7/20/2020
Awesome! Just like the day I bought it.
by: Patrick05/14/2012
Easy to install - sturdy as my last handle. The only complaint is that the instructions that came with it were the instructions to mount the trailer jack, not to replace the handle. But after removing the cap it seemed pretty simple, and sure enough it was. Just be sure to have some extra grease with you just in case you rub too much off of the gears with your hands/tools while installing the new handle and pin.
by: Gene H11/12/2015
I have ordered products from e-trailer before. They have consistently done an excellent job of describing the item, providing tracking information, and having great prices. They are the first place I look for any item that I think that they might carry.
by: Paul S.05/12/2011
It was a little tricky discerning exactly which jack handle would fit my Fulton trailer jack, but the price was right, the delivery came promptly, and I'd definitely do business with etrailer again!
by: Wayne03/24/2018
I turned too tight & broke the old handle off. I had resolved myself to thinking that I would have to buy a new jack. While online with Etrailer I found this repair kit. I order it & it was shipped same day. I got it installed & it works great. It saved me $100+. I wish the instructions had been a little better for those of us that can't remember how the old parts were installed.
by: Troy07/12/2017
I ordered the Replacement Sidewinder Handle Kit from George, and the entire ordering process went smoothly. Confirmation of the order was prompt, and the tracking information was provided. In short, navigating his website was easy , and his followup communications were superb. I would definitely order from George again.
by: Theodore K.04/23/2014
This is exactly what I needed. Installation, however, was not a breeze. I did get it installed.
Great customer service in identifying the part that I needed!
Theodore K.
4/24/2015
Perfect.
by: Craig 08/29/2022
The handle arrived quickly and as advertised. It installed easily according to the instructions and is working very well.
by: Bill G03/19/2018
Needed a replacement handle for my trailer jack, this was exactly what I needed. Thanks etrailer for supplying this for me. Shipped fast, and packaged well. Will purchase from etrailer again.
by: Tim J07/11/2012
Having never worked internally on my marine jack I was reluctant to work on it. Coming home from a trip, the original handle just disappeared. I ordered a replacement handle rather than spend the money for a new jack...it was so simple. Instructions were provided, simple fix and easy to do. It took less than 10 minutes...thanks.
by: Michael D05/17/2015
I received the order in a timely fashion.
I took a chance and ordered the closest replacement part, as they no longer carry my part. It won't work, not their problem.
BUT, the internal plastic bag had been opened prior to shipment, and part of my order was missing. I'm in limbo, they have an accounting problem, life goes on. That's my comment.
by: Henry 09/13/2021
Wow, what great service. etrailer sets the bar high. Placed the order by phone, confirmed and shipped out same day, came in and was exactly what was represented and was perfect replacement part for the repair job I needed to perform.
by: Dennis08/01/2018
I received my part within a few days. I installed the handle the day after receiving it. It fit perfectly. Thanks Natalie for the help. I will be calling back when I need parts again.
by: Bob W.09/24/2016
Received the handle about 5 hrs. after your e-mail saying it had been delivered. Had it installed in 15 to 20 min.. The pin that came with the new handle was not very tight in the handle. The old pin was tighter so I used it. I question if the hole in the handle might be larger than it should be. Old pin was not very tight. hope it stays in okay. I will have to give you a 4 because I think the handle is not top quality. Your service and price were very good. Possible problem might not be your fault. Would have to blame it on the Mfg. I will give you another try if I need anything else. Bob
by: Donald 04/08/2023
It worked perfect
by: Todd 06/12/2021
Broke the handle being an idiot. Easy to fix make sure hole in handle and Groove in gear where pin is recessed are aligned looking straight down so it’s easy to press the pin in vertical.
25
105
Show More Reviews
See what our Experts say about this Fulton Accessories and Parts
- Looking for a Replacement Handle for a Fulton Sidewind Trailer JackThere are several different Fulton jacks that use a sidewind handle like part # F0933305S00, so to make sure we get you the correct parts, I will need a little more information about your jack. Do you know the model number of your jack? Fulton will usually include this on a sticker on the main jack tube. If not, can you tell me the weight capacity or the diameter of the outer jack tube? If your jack uses this type of handle, the handle will come with a flanged bushing, grooved pin and...
view full answer... - Replacement Handle For Fulton Wheel Jack On 27 Ft Marine TrailerWe do offer a couple of replacement handles that are designed for Fulton jacks. part # F0933305S00 is designed to fit Fulton jack models TJ1055, TJ1057, TJ1222, TJ255, TJD125, TJ122F, XP15/L/W/WC and XP15L. I have attached a photo of this handle that shows measurements you can take to make sure it will work for you. If you decide you want to replace your jack, you can let me know what style trailer you have and what the tongue weight is for your trailer and I will be happy to make a...
view full answer...
- Diameter of the Fulton Replacement Jack Handle # F0933305S00I went out and pulled the Fulton Replacement Jack Handle to measure for you. The diameter of the steel handle shaft is 1/2 inch or 12.55 mm. I produced a short video, see link, showing all of the dimensions of this handle in SAE and Metric measurements.
view full answer... - Will Fulton Replacement Sidewind Handle Kit Part F0933305S00 Fit a 2,500 Pound JackThe Fulton Replacement Sidewind Handle Kit will fit certain Fulton jack models; TJ1055, TJ1057, TJ1222, TJ255, TJD125, TJ122F, XP15/L/W/WC and XP15L. If your jack is not one of these the handle will not work. I do not believe this handle will be compatible with 2,500 pound jacks. If you write back with the make and model of your jack, I can check to see if we have a replacement handle for that model.
view full answer... - What Replacement Pal Nut Do I Need for My Fulton Jack Model TJ12220301?I have a solution for you. Unfortunately, I reached out to my contact at Horizon (the owners of Fulton), and they confirmed that they do not manufacture the standard half-inch pal nut that you need for securing your crank handle in place on your Fulton TJ12220301 jack. However, the pal-nut does come with the Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks # F0933305S00.
view full answer... - Diameter of the Sidewind Handle Kit for Pro Series or Fulton Marine JacksThe Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks part # F0933305S00 has a 1/2" diameter steel rod.
view full answer...
- Availability of Replacement Handle Bushing for Fulton Sidewind JackFulton crank handle bushings are offered as part of a kit that includes the handle, pin and bushing. The bushings are not offered on their own. The linked page will show you the three Fulton handle kits we offer, such as Sidewind Handle Kit # F0933305S00 that fits many different jack models. Please feel free to let me know your jack model number and I will be glad to verify correct fit.
view full answer... - Replacement Sidewind Handle for Fulton HD25000101 FHD2500 Bolt-On Trailer Tongue Jack w/Drop LegThe Fulton HD25000101 jack that you referenced can be found as part # FHD2500 on our site. For this jack the Replacement Sidewind Handle Kit is part # F0933305S00.
view full answer... - Pin Diameter of Fulton Replacement Sidewind Handle Kit # F0933305S00The Fulton Replacement Sidewind Jack Handle # F0933305S00 that you referenced has a pin diameter of a 1/2 inch. I have attached an image with this and some additional measurements labeled that you might find helpful when determining if this will work with your Shelby jack.
view full answer...
- Distance to Pin Hole of Fulton Trailer Jack Replacement Sidewind HandleThe replacement handle for a Fulton trailer jack that has the closest dimensions to what you mentioned is the Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks # F0933305S00. This replacement handle has a distance of 2-1/8" from where it inserts to the pin hole. The only way to truly get the right replacement handle for your jack is by the jack's model number, so if you let me know what that is I can take a look to see if we have something that will work. I've also...
view full answer...
- Replacement Jack Handle for a 1,500 Fulton Jack FXP15W with 10 inches of LiftIt sounds like the jack you have is the Fulton Jack part # FXP15W. This is a Fulton jack with a 1,500 lb capacity with 10 inches of lift. The correct crank for this jack would be the Replacement Sidewind Handle Kit # F0933305S00. Without more information on your winch I really can't recommend you a replacement handle. I tried searching for K2500 and couldn't find anything relating to a winch. If you could maybe look again for a brand name, another part number or send me a picture I can...
view full answer... - Will The Replacement Sidewind Handle Kit # F0933305S00 Fit Fulton Magnum Jack On 2002 Boat Trailer?With the Magnum series of Fulton jacks being obsolete you will want to disassemble your jack to verify if the handle shaft matches on the Replacement Sidewind Handle Kit # F0933305S00. Even with knowing the model number on your Jack it is difficult to get information from Fulton on compatibility as they just say if the part wasn't specific to that jack it will not fit. This handle is 1/2" in diameter and the roll pin for the gear is located 2-1/8" in on center from the end of the shaft....
view full answer... - How to Remove the Pin on Fulton Jack Handle # F0933305S00To help you remove the old crank handle pin from your Fulton jack you can try applying a spray-on lubricant and allow it to penetrate for a while before hammering. Or you may also try carefully heating that part of the handle with a small torch. The pin and handle are made of different metals and so should expand different amounts; this may help loosen the pin from the handle shaft so you can remove the pin. Be sure to use appropriate gloves or other protection. If neither of these methods...
view full answer... - Replacement Handle for Pro Series Trailer Jack # EJ10000301The jack handle part # F0933305S00 is the correct one for your Pro Series Jack # EJ10000301.
view full answer... - Are 800 lb and 1,500 lbs Replacement Fulton Trailer Jack Handles InterchangeableBoth the Fulton 800 lb Handle # F0933301S00 and the 1,500 lb Handle # F0933305S00 have the same diameter so you just need to make sure that the distance from the end of the handle to the pin hole is similar to what you currently have.
view full answer...
- Replacement Sidewind Handle Needed for Fulton Magnum Series 1000 LB JackThe Replacement Sidewind Handle Kit, # F0933305S00, is going to work for Fulton jacks with up to a 1,500 lb capacity so this would work for your 1,000 lb Magnum series jack. Part # F0933301S00 is going to replace handles on Fulton jacks with up to an 800 lb capacity.
view full answer... - Replacement Handle for Reese Tow Power Trailer Jack 74410You have two choices for a replacement handle for the now obsolete Reese trailer jack 74410. The first option is the Fulton Sidewind 800 lb Handle # F0933301S00. Your second option is the Fulton Sidewind 1500 lb Handle # F0933305S00. The dimensions between these two are very similar. Our contact at Reese told us that the nut and bolt option handle is no longer available either and this handle is easier to install. With either handle you simply pull the pin out of the jack (if it is still...
view full answer... - Replacement Handle For Fulton Magnum Swivel Marine JacksThe Fulton Magnum series is an older line of jacks manufactured by Fulton but the jacks have not changed much so you can still use the replacement handles available today. If the Fulton Magnum series has a capacity at or above 1,500 lbs the # F0933305S00 is what you need. If the capacity is lower then 1,500 lbs, you will need part # F0933301S00.
view full answer... - Replacement Jack Handle Availability for a Fulton Magnum Series JackI spoke to my contact at Fulton and he informed me that the Fulton Magnum series jacks were an older line of jacks that had capacities of over 1,000 lbs. Without knowing what capacity your jack is or what model it is it would be hard to pick out the correct handle. If you have a round tube jack with a sidewind handle and the capacity is above the 1,500 lbs the # F0933305S00 that you referenced would be the correct handle. If it's lower than 1,500, the part # F0933301S00 would be the correct...
view full answer... - Replacement Handle and Retaining Clip for Fulton JackThank you for that photo, and while we do have the parts you need, the plastic part of the handle and retaining clip are not available as individual replacement parts so you will need to get the replacement handle, which comes with those parts. The correct one will be Replacement Sidewind Handle Kit for Fulton Marine Jacks - 800 lbs # F0933301S00 for Fulton jacks with a capacity up to 800 lbs OR the Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks - 1,500 lbs # F0933305S00...
view full answer...
- Replacement Handle for Fulton Magnum Series JackIt may be possible to get another handle; I would need to know the model number of your jack in order to see if there is a compatible replacement. Do you know the model number of your jack? I was unable to find any reference to a Fulton Maximum Series.
view full answer...
- Availability of the Handle Bushing for a Fulton JackThe bushing in the Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks # F0933305S00 is only available in the kits. We do not have it available on its own. It is also available in gear kits like the Replacement Bevel Gear Kit # F0933302S00.
view full answer... - Replacement Handle for a Fulton F2 1600 Capacity Trailer JackThe Fulton F2 trailer jacks use replacement handle # F500134. It includes the handle, pin, and hardware.
view full answer... - Replacement Handle For Fulton Swing-Up Trailer JackWe offer two replacement handles for Fulton jacks. Depending on your model jack one of the handles should work for you. If your Fulton jack is a model TJ1055, TJ1057, TJ1222, TJ255, TJD125, TJ122F, XP15/L/W/WC or XP15L, then part # F0933305S00 is the handle you need. If you have a Fulton F2 swing-up jack then the replacement handle that will work is part # F500134.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dan
8/27/2023
perfectly