Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs - Black
(258 reviews)
Price: $243.57
In Stock
Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs - Black
Item # F26ZR
Retail:$272.35
Our Price: $243.57
You Save: $28.78
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (258)
- Q & A (0)
- Photos
Fulton Trailer Jack - F26ZR
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 10 Inch Lift
- With Wheel
- Steel
- Fulton
Swivel jack is designed for use with marine and utility trailers. Bracket height is 25" when extended, 15" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware.
Features:
- Marine-grade swivel jack lets you raise and lower your trailer
- Convenient, spring-loaded, plunger-pin swivel feature
- Swing up to stow parallel to tongue for travel
- Move back into upright position for use
- Acme screw raises and lowers the jack quickly and easily, traveling 1" for every 5 turns
- TruTurn 360-degree caster allows easy wheel movement in all directions
- Bushing helps eliminate rattling of tubes by ensuring that the inner tube fits snuggly in the outer tube
- Soft, ergonomic grip on sidewind handle makes it easy to crank jack
- Handle catch helps keep handle from swinging when jack is stowed
- Heavy-gauge steel construction
- Grease fittings make lubrication easy
- Bolt-on mounting with included hardware
- Matte black color
Specs:
- Mounting: 3" x 3" and 3" x 4" trailer frames
- Bracket height:
- 15" Retracted
- 25" Extended
- Lift: 10"
- Lift capacity: 1,500 lbs
- Wheel dimensions: 8" diameter x 2" wide
- Pull pin diameter: 1/2"
- 5-Year limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
141160 Fulton Swing Up True Turn 360 Trailer Jack - 8" Single Wheel - Sidewind - Bolt On - 1.5K
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Arrived Damaged
Customer Reviews
Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs - Black - F26ZR
Average Customer Rating: 4.8 out of 5 stars (258 Customer Reviews)
Swivel jack is designed for use with marine and utility trailers. Bracket height is 25" when extended, 15" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware.by: James 04/09/2023
Works great, whelks moves and turns very easy.
by: Ann01/04/2021
Very happy with my new Fulton trailer jack, and winch. Installation was easy enough I was able to do it myself. The only thing I had to get my husband to do was cut a aluminum plate to cover the hole where the old jack was.
Shipping was really fast too.
by: Clay 03/05/2024
Great quailty. Super well built.
by: Chris 01/20/2024
Super fast shipping!!!
by: Allen 07/08/2023
Pleased getting this in a timely manner. It's already on the trailer doing its job.
by: Tom K07/22/2023
Great service and quality product!
by: Bryan 05/13/2020
Upgraded my boat trailer jack to the Fulton XLT. Huge improvement over my prior Fulton 1200# jack. Improved ease of cranking makes all the difference in the world.
by: Bryan 05/18/2023
Works great
by: Tim 09/26/2022
received your product in near record time! product was a promised, and my customer was most pleased. all my other venders have been out of this particular item for quite some time. your company has been added to my list of options for ordering.
by: Albert 08/09/2021
I like this tongue Jack. It was easy to install, looks great on my black trailer and it is far sturdier than the one that came with the trailer. I have several Fulton products and highly recommend there products.
by: Kelly 03/31/2023
Fast shipping
by: Jim10/12/2022
High quality, works well and would reco mmend!
by: John 10/28/2022
I’ve never seen a jack this nice. Very well thought out and built
by: Richard 08/28/2020
Delivered Quickly as promised, no issues. Easy transaction!
Richard E.
8/30/2021
No issues after one year. Cranks smoothly and the larger wheel makes moving the front of the boat easier.
by: Ty04/29/2022
Very nice, easy assembly. Good hardware, etc.
by: Mark 01/08/2022
Excellent product in the way it performs and locks I would definitely recommend it to my friends that have boats
by: Del 07/25/2022
Great service top quality products!
by: Eddie 12/03/2021
Well built and holding up well.
by: Paula 10/27/2021
Very high quality product. I'm most impressed, though, with the customer service and communication. Excellent!!!
by: David 11/10/2021
Tyra was very helpful! Thank You. We will do more business in the future
by: Paul05/14/2023
by: Ryan 07/20/2023
by: Tim 02/14/2024
by: Chance 10/01/2021
Fast delivery. Great product
by: Steven 01/22/2022
25
259
Show More Reviews
See what our Experts say about this Fulton Trailer Jack
- Needing A Fold-Away Coupler For A 3" X 4" Trailer FrameThe Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs. part # FHDPB340301, is a fold away coupler hinge for a 3" X 4" trailer frame. I have included a product description link and a video installation link below.
view full answer... - Replacement Jack for Boat Trailer With Wheel That Swivels EasilyWe have a great option for a boat trailer jack that is going to easily swivel with the Fulton XLT jack. Keeping in mind that all jack wheels can struggle turning if there is too much weight on them, the XLT has a very high-quality caster and wheel and is designed with easy maneuverability in mind. The jack is designed to fit 3" x 3" or 3" x 4" trailer frames: - Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt-On - Sidewind - 10" Lift - 1,500 lbs # F26ZR I have added some customer reviews...
view full answer...
- Can Fulton Trailer Jack - F26ZR fit a 1.5 x 4 Trailer FrameIf you used a 1.5 inch spacer to make your 1.5 inch wide frame 3 inches wide you could use the Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR.
view full answer... - Replacement Fulton Jack OptionIf you are not wanting a bolt-on jack such as the Fulton XLT Bolt-Thru Swivel Trailer Jack, # F26ZR we have the Fulton F2 Adjustable A-Frame Jack, # F1413250334. The F2 Series jack is specially designed for use with Fulton's F2 A-frame coupler. If this is not the model you currently have, let us know that we can make suggestion of best option for replacing the model you currently have.
view full answer... - Can the Mounting Height of the Dutton-Lainson Square Swivel Jack Be AdjustedThe bolt-on frame bracket for the Dutton-Lainson Square Swivel Jack part # DL22340 is welded to the outer tube so no, it cannot be adjusted. I think a better option would be the Fulton XLT Bolt-Thru Swivel Trailer Jack part # F26ZR since the bolt-on frame brackets sit lower on the jack tube which provides more ground clearance.
view full answer... - Can a New Fulton Bolt-Thru Jack Be Used in Place of an Older Jack with a Weld-On BracketYes, since your current Fulton jack is a bolt-thru style, you can use the Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR with your current welded on bracket. You just need to remove the jack from the included bolt-on bracket and mount it to your welded bracket like you mentioned.
view full answer...
- Are There Replacement Parts For Fulton XLT 1500 Jack # F26ZRThough we do not carry a complete replacement wheel assembly for the Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR, you will have to purchase the entire jack again. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist.
view full answer... - Does Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR Come Pre-GreasedThe Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR comes pre-greased so you would not need to grease it before using it the first time. You might grease the jack a couple times a year with those fittings, but the jack does not come with a strict grease schedule.
view full answer... - Replacement Jack For Shelby Model 5850 GF Swivel JackWe do not have a replacement gear for your Shelby Model 5850GF swivel jack, unfortunately, so you'd need a replacement jack instead. The Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR is a bolt on swivel jack designed for utility and marine trailers that have a frame measuring 3"x3", or 3"x4" . This jack also has a lift capacity of 1,500lbs, and measures 15" retracted and 25" extended.
view full answer... - Weld-On Plate That Is Compatible With Fulton XLT Trailer JacksI went ahead and checked out your Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR, and the Fulton F2 Swing-Up Trailer Jack, and you actually won't be able to use this mounting bracket with your XLT jack due to the fact that the plate for the F2 jack is different, and will get welded to your trailer. The bolt on Fulton F2 jack attaches to your trailer the same way, with the use of a u-bolt. However, what you could do, is use the: -Jack Mounting Bracket for Fulton Marine Jack and weld...
view full answer... - Bolt On Trailer Jack Recommendation for 3,500 lb Trailer with 10 inch LiftHey Joel, the Fulton XLT bolt thru jack # F26ZR would be a great option that covers everything you are needing. It is a bolt-on swivel jack with 10 inch of lift. This jack has a 1,500 lb lift capacity which would be way more tongue weight capacity than a 3,500 lb trailer would have so it would jack up and down easily.
view full answer... - Distance from Mounting Plate to Jack Tube on Fulton XLT Trailer Jack F26ZRIn regards to the Fulton XLT Bolt-Thru Swivel Trailer Jack part # F26ZR, the distance from the center of the mounting bracket to the top of the jack tube cap is 13.4". I have attached a photo below as well to show this. I spoke to Fulton and this is the only measurement they were able to provide in reference to the jack tube height.
view full answer...
- Recommended Swivel Trailer Jack with Rubber Tires That Offers 12+ Inches of LiftWe have several jacks that fit most of the parameters you mentioned, but the challenge was finding one with a rubber tire. The ARK Extreme Off-Road Ratcheting Trailer Jack, part # ORJW1SU would absolutely check all the boxes. It's not an inexpensive choice, but it offers all the features you're looking for. The jack can handle boat/trailer combinations with up to a 770 lb tongue weight, which is plenty for a boat trailer like your Boston Whaler Montauk. The jack provides up to 10 inches...
view full answer... - Mounting Plate Bolt Hole Dimensions For Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZRThe mounting plate for the Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR has the following dimensions. I have included an image to show the measuring points. The holes are spread 5-1/2" wide with the vertical holes separated 1" on the inner holes from the outer holes and the center holes spread 2-1/2". Hopefully this will help you to verify if it will fit the mounting holes on your Triton.
view full answer...
- Is Fulton XLT Trailer Jack F26ZR A Bolt On or Bolt Through JackThe Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR comes with brackets that would allow you to attach to the trailer frame that bolt around the frame but if you wanted to drill holes in the trailer frame and attach it through the frame you could do that as well.
view full answer... - What Is The Wheel Of The Fulton XLT # F26ZR Made Of?The Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR has a wheel that is made of Polypropylene according to my contact at Fulton.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Andrew K
Installed by:
Jeff D
Edited by:
Lindsey S
Video Edited:
Jacob T
Written by:
Alexander C
Updated by:
Mike S
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
4/9/2024
Doing great. Best trailer jack I have ever by.