Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Weld-on mounting bracket and hardware for Fulton F2 jacks. Features mount and swivel system that is adjustable to any height and has an integrated, easy-to-grip pull pin for swiveling into position. Designed for 3" x 4" mounts.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this weld-on mounting bracket and hardware for the Fulton swing-up trailer jacks with the three inch by four inch mount. Now, this part is designed to work with the Fulton F2 swing-up jacks that have the three inch by four inch mounting systems. Basically this bracket is designed to weld onto your trailer frame. And once it's installed in the trailer frame, it allows you to bolt your Fulton jack to the trailer. As I mentioned, it includes the mounting bolts and the washers for attaching the jack.
It is a raw finish. A few dimensions on this, so we're gonna give you the overall dimension. So if we go from one end to the other, the length on it is 5-3/4 inches. The width on it, 4-3/4 inches. And then the measurement on the bolt holes, if we go center to center lengthwise, 4-1/2 inches.
And then center to center widthwise, 3-1/2 inches. But that should do it for the review on this weld-on mounting bracket and hardware for the Fulton swing-up trailer jacks with the three inch by four inch mount.
Average Customer Rating: 4.7 out of 5 stars (20 Customer Reviews)
Weld-on mounting bracket and hardware for Fulton F2 jacks. Features mount and swivel system that is adjustable to any height and has an integrated, easy-to-grip pull pin for swiveling into position. Designed for 3" x 4" mounts.Plate was shiped ups very fast & great cuminication. Besides grinding the plate sides its ready to weld on. I prefer a rod welder to weld it on but I used a wire fed. Looks good. Tourqed bolts to 25-30 ft.lbs. to hold the jack on. Sprayed it with spray paint to keep it from rusting. Looks good.
I think an adapter to directly mount a Fulton F2 on a swing mount would be much more useful and no welding is required. Here’s a picture of the adapter I modified... uses the existing snap ring mount, and only requires a 1/2” x 7/8” pin that is hidden when the F2 is bolted in place.
Quick FixPurchased a Fulton F2 Twin-Trac for a customers Godfrey Sundeck SD2400 trailer only to find the included U-Bolts were not wide enough for the tongue. We considered drilling but we're a bit wary of how that might affect the strength of the tongue under such heavy weight.
I called Fulton and they dircted me to eTrailer. The knowlegable staff got me the weld on plate very quickly. Took the plate and the mounting box for the old jack to a local welder as I don't trust my own handi-work on such things. Once that was done it took all of about 20 minutes to mount the jack and what an improvement.
The jack locks firmly, swings up and cranks easily and the built in brake is certainly a nice touch as is the handle holder clip to keep the handle from swinging toward the ground while driving.
I highly recommend the Fulton F2 jacks and the Weld-On Mounting Bracket is absolutely the way to go on bigger trailers.
Product worked perfectly. No problem welding this plate on and bolting on the jack. I highly recommend this product.
This bracket makes simple work of the mounting for the Fulton F2 Jack!! Well worth the money. Etrailer is great and I would definately purchase from them again!!
Only came with one bolt and two washers.
Jenny N.
2/11/2022
I will have our customer service team reach out to you.
I was amazed how easy the website was to find exactly what I needed. I even found a video on the website on how to replace the part I ordered! I received the parts very quickly and well packaged. The shipment tracking was great and the follow up emails from etrailers were awesome.
Not only do I give it a 5 star, I am using this experience in my business as an example of great customer service!
Fits the jack wheel perfectly.
Exactly what I ordered, and delivered fast. Like doing business this way.
A great way to fasten jack to trailer
high quality - no questions,
Rob
It is a great product with the best qua lity
Very fast delivery by Etrailer of a hard to find product that no one esle had.
Exactly what we needed.
Installed perfectly.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sniper 1.
6/9/2014
After 1 year its still holding up strong and worth every penney in my opinion. Still looks nice