Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
(730 reviews)
Price: $8.90
In Stock
Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
Item # MCL95AB
Retail:$15.58
Our Price: $8.90
You Save: 43%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (730)
- Q & A (0)
- Photos
Optronics Trailer Lights - MCL95AB
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 2L x 1W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.
Features:
- LED trailer light functions as a clearance light or side marker light when properly mounted
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Amber lens over white LEDs
- Compatible with 12V DC systems
- Stud mounts to trailer with included stud and stainless steel base
- 1-Wire design grounds through mounting hardware
- P2 rated
Specs:
- Dimensions: 2-1/8" long x 1-1/8" wide x 1-1/16" deep
- Lead wire: 20" long
- Diodes: 3
- Power draw at 12.8V: 0.051 amps
- Lifetime LED warranty
Manufacturer Cross Reference
Light will work as an exact replacement for:
Bargman # 42-99-402
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL95AB Optronics LED Clearance or Side Marker Trailer Light - Submersible - 3 Diodes - Rectangle - Amber Lens - P2/P3 Rated
Alternate part number: MCL-95AB
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens - MCL95AB
Average Customer Rating: 4.8 out of 5 stars (730 Customer Reviews)
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.by: Russell 01/30/2023
Very nice company to work with,order arrived right on time.installation of new LED lights on my Ranger boat trailer was very easy and quality was as good as original lighting
by: John 02/07/2024
I have used these lights on my boat trailer and yes they are submerged in water when launching and reloading the boat and so far there has been no issues at all with the lights and I’m very pleased with them.
by: Peter 04/28/2024
Perfect replacement for my trailer's original side marker lights.
by: Charles04/26/2024
Year later , 65 trips and marker lights still working like brand new!
by: Jeff 01/21/2024
Mounted these replacement side markers over a year ago and they are still working like new. They are frequently submerged in both fresh and saltwater. Good quality product.
by: Bobby 02/23/2024
I had previously bought yellow LED marker lights and liked how they turned out. Bought more for a different trailer.
by: Shane 03/27/2024
Great lights really lite up the side of my trailer.
by: Peter 04/27/2024
There is a bewildering number of different possible options but your website led me straight to the exact replacement light I needed.
by: Richard 02/06/2024
These were replacement lights for my trailer and they work great. Thanks
by: Marvin S04/18/2018
I want to thank you for all your help with my trailer you were more helpful than you realize. So this is my trailer for a 22' Flats Cat shallow draft Catamaran. I totally dismantled my trailer and buffed by hand with a wire buffer and sand blasted in some spots and applied multiple coats of some very expensive galvanize paint (Z.R.C.). I installed all new C. E. Smith Carpet (about 80'), seven new LED waterproof lights, new springs, new equalizers, new tongue jack, new wench, new safety chain, new chain brackets, all new SS hardware and a 35' long wiring harness.
I was able to send only one review with a picture of the safety chain and brackets. I'm having a little trouble with the rest..oh some of these items were bought locally or from your competitors, until I found ETRAILER. Your prices were cheaper for the exact same things. Your helpful how to videos were helpful. And Rose, your personal helpful knowledge made my buying experience very pleasant, I actually enjoyed talking to you! Thanks to ETRAILER and specifically to Rose G.
by: Ryan02/13/2018
Great product so far, bright and matches existing truck Amber LED lights. Easy to install with stud attached and single wire.
Ryan
2/13/2019
Product still works with no problem. Recommended for any use.
by: Jamesd248703/26/2024
Quick shipping, Fair price great product
by: Robert 10/11/2022
These are direct replacement for my boat trailer. They arrived quickly.
Robert
10/12/2023
Light is still working great on my boat trailer. Even being submerged in the river regularly, still working great.
Mike L.
11/3/2023
@Robert We're glad to hear that, thanks!
by: Natalia02/25/2024
Matched my other lights great. It is a bit brighter light than the original bulb version that i have (which is great).
by: Jeff 02/12/2024
Nice clearance light
by: Eric02/26/2018
Very bright, very easy install; only reason for 4 stars is bc I just installed them and can't speak for their longevity; I drilled a small hole in my trailer next to the main mounting hole to poke the wire through, so as not to see the wire; looked very nice.
Eric
2/26/2019
As of the last time I launched which was in November the lights still worked great. They have been fully submersed many times in either fresh or salt water.
by: Robert08/07/2023
So I initially was asked to do a review and I only gave one star because the product never arrived as scheduled. It did arrive today and it was probably the post office fault. I was excited to see that the product matched the old lights. In the description they mentioned a stainless steel base. That's great because it's going on a saltwater boat trailer. After further examining I saw that the stud was steel. Really. My old one had a stainless steel stud or bolt. Come on guys stainless steel base with a steel mounting bolt. The light grounds through the mounting stud. Fortunately I was able to disassemble and swap out for a stainless steel one. I guess this wouldn't be a problem if it wasn't going in saltwater but it is.
by: Mark B08/26/2013
Very easy to install and look great on trailer. Low profile and small but very bright LED's. They really look much better than the old bulb type I had on there before. I have not "dunked" them in the salt water yet but hopefully they will hold up.
Mark B.
8/26/2014
the submersible LED trailer lights are still shining as bright as ever despite repeated dunking in salt water for the past year. These have been a great purchase.
by: Andy 02/04/2024
Very easy to install. Grounds with the same bolt that attaches it to the trailer.
by: Horacecarter02/15/2019
Timely shipment of the exact items I viewed online and needed to repair my boat trailer. I will go back to etrailer when I need items in the future. Price was also fair. Thanks etrailer.
Horacecarter
2/16/2020
Lights have worked well with a year in service. I would buy them again based on fit, price and reliability.
by: Micheal04/30/2021
I bought these light for a pull behind motorcycle trailer build I was doing and I am pleased to say they have been great! They have been on the trailer for about a year now and I have travelled with the trailer for about 3500 miles now towing it behind my motorcycle. No problems or issues. They draw very little power which is great for a motorcycle charging system.
by: Kay 04/09/2024
Exactly the light I needed to replace existing light. Fast delivery - great price. Easy to install
by: Troy 02/17/2024
Great source for your trailering needs,as well as customer service.
25
728
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Dimensions Of Mounting Stud On Optronics LED Trailer Clearance, Side Marker LightThe mounting stud diameter on the LED Trailer Clearance, Side Marker Light, part # MCL95AB measures 5/8 inches long and is 1/4 inch diameter. This comes with the nut and washer needed to install on your trailer. This is a single-wire design light. The mounting stud also doubles as the electrical ground. I have attached a link to a video you can check out.
view full answer... - Is Optronics Mini Rectangular LED Trailer Clearance/Side Marker Light MCL95AB SubmersibleThe Optronics Mini Rectangular LED Trailer Clearance/Side Marker Light # MCL95AB is indeed submersible. This single-wire light uses the mounting stud to establish the ground connection and the one pigtail lead accepts the +12V signal. Please refer to the linked video.
view full answer... - Recommendations for Submersible Boat Trailer Lights that Short Out when SubmergedThere may be some wiring on your trailer that is exposed that is causing the short on the circuit, if you can locate that and repair it as necessary you should be able to eliminate the shorting and fuse blowing you are experiencing on your trailer. I attached a demonstration video for the Optronics Trailer Light # MCL95AB for you to check out also. The other option you have would be to unplug your trailer connector before you submerge it in water. I attached an FAQ article on trailer wiring...
view full answer... - Solution for Needing Side Reflectors on Vehicle FenderThat's a pretty odd place for someone to install a turn signal on a vehicle, but for a replacement that's similar we have the Sealed, Mini Rectangular LED Trailer Clearance, Side Marker Light # MCL95AB which has dimensions of 2-1/8" L x 1-1/8" W x 1-1/16" D.
view full answer...
- Can Mounting Stud of Optronics LED Clearance Light Be Changed Out for a Longer Stud?The Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens # MCL95AB can use a longer mounting for your ground. The bolt serves as the ground, so you simply need to make sure the contact with the base is metal to metal. We do not have a light with that longer bolt, but you can replace that bolt with a longer one as long as you maintain a good connection to the base.
view full answer... - Wire Gauge Used on Optronics MCL95AB LED Clearance/Marker LampThe power wire on the Optronics # MCL95AB clearance light is 18 gauge, which is sufficient for the super-low power consumption of an LED lamp. To see an installation video, click the provided link.
view full answer... - How Long is the Power Wire Attached to the # MCL95AB LED Clearance LightThe length of the Wire attached to the Optronics Trailer Clearance Lights, item # MCL95AB, is 19-1/2 inches long.
view full answer... - Is There Difference Between Optronics Clearance Lights MCL95AS and MCL95ABThere basically is no difference between the part numbers you mentioned. We have the part # MCL95AB but the MCL95AS appears to be a way to order the same light in a different packaging. Both have a stainless steel base and bolt. This is submersible.
view full answer... - Replacement Clearance And Side Marker Lights For A 2020 Forest River Surveyor Luxury 272FLSHi Mimi, Manufacturers unfortunately do not list the parts they use so I'll need to get a bit more information on the lights you have in order to find a replacement. If you want to send me some pictures of lights along with the measurements of them I can look for a replacement.
view full answer... - What is the Post on the Optronics LED Clearance or Side Marker Light Made FromI was able to confirm with my contact at Optronics that the mounting post on the # MCL95AB is stainless steel, but the mounting hardware is not.
view full answer... - Can the Optronics Clearance Light # MCL95AB be Mounted and Grounded to an Aluminum Trailer FrameYou can still use the Optronics clearance light # MCL95AB with an aluminum frame. This light grounds through the mounting stud. In the event that you end up with a bad ground to the frame, you can attach a wire behind the mounting stud and run it to the main ground on the trailer connector.
view full answer... - Replacement Running/Clearance Lights for 2000 Sea Ray TrailerTo replace the running/clearance lights on your 2000 Sea Ray trailer you can use something like the # MCL95AB which is a 2" x 1" LED light. I have also linked all of our available amber colored clearance lights for you to have a look at in case you need a different size. If you've got a different size, just let me know and I can see what we have available if you can't find it from the linked page.
view full answer... - How to Mount Trailer Clearance Lights that Ground Through the Mounting StudsWith a one wire light like the Optronics Mini Rectangular LED Clearance Light, item # MCL95AB, you can ground the light in one of two ways. If the light is mounted to a location that allows for the mounting bolt or screw to contact a good ground location such as the vehicle frame then you can mount the light in this location. Then, run the power wire to a 12 volt positive tail light circuit without further wiring. If the location the light is mounted to is not a good source of ground,...
view full answer... - Troubleshooting Trailer Clearance Lights that Don't Fully IlluminateSounds like you are overloading the running light trailer wiring circuit of your truck and that is why the lights aren't wanting to illuminate properly. Easiest solution for that is to replace all the lights with LEDs as they draw considerably less. I attached a link to all of the trailer clearance LED lights we have. Are there quite a few clearance lights on your trailer?
view full answer... - Troubleshooting LED Lights on 2008 Shadow Horse TrailerSince most of your trailer lights are functioning I would check the two subject lights' mounting and wiring for the cause for the problem. If the light uses a mounting stud or mounting hardware to establish the ground, like # MCL95AB, then you can try sanding/cleaning the mating surfaces to remove any corrosion, dirt or trapped moisture that could be interfering with the electrical connection. Also inspect the wiring for signs of damage from road debris or hungry critters. Once you have...
view full answer... - Could Optronics LED Clearance Light # MCL95AB Ground with WireLights that ground through their mounting hardware are very reliable but if you wanted to use a ground wire instead you'd just need to run a ground wire to the mounting hardware and you'd accomplish what you are looking for.
view full answer... - Where Do Amber and Red Trailer Clearance Lights Normally Install on TrailerIn general for trailer clearance lights you want to have red clearance lights that face the rear of the trailer and then amber that are on the sides or face the sides. I attached a link to a page that has all of the clearance lights we carry as well.
view full answer... - Replacement for Optronics MCL-95APG Trailer Clearance Light The Optronics Sealed Mini Rectangular LED Trailer Clearance Side Marker Light # MCL95AB referenced in your question is the closest option we have available to the MCL-95APG model you mentioned. The only difference appears to be the type of wiring that is included with the light, as the model you have features a quick-plug style connector while the # MCL95AB has a single power wire with a bare end. It will ground through its mounting stud. The MCL-95APG light assembly is no longer available...
view full answer... - Recommended Stud-Mount Single-Wire Mini Rectangular LED Clearance Light For Boat TrailerWe do have a clearance light that will work for you. I recommend the Optronics Mini Rectangular LED Trailer Clearance Light, part # MCL95AB. This is a 3-diode light that measures 2-1/8 inch x 1-1/8 inch and is 1-1/16 inch deep. It is a stud-mount single wire light with an amber lens. This light has a sealed, waterproof housing, so it will work great for your boat trailer.
view full answer... - Replacement Amber Clearance Light for a 2001 Four Winns Boat Trailer Thank you for the pictures they do help. The Optronics LED Clearance or Side Marker Light - Submersible # MCL95AB you're looking at will work great as a replacement for your Four Winns Boat Trailer. This LED light is a 12V light that draws 12.8V: 0.051 amps, measures 2-1/8" long x 1-1/8" wide x 1-1/16" deep, and has a 20" long power wire hanging off of it. Attached is an installation video for you to check out.
view full answer...
- Amber Clearance Light Recommendation to Increase Night Time Visibility You'd want to go with amber, LED clearance lights like the part # MCL95AB as LEDs are much brighter than incandescent bulbs. For more of a strip style light you'd want the part # MCL19AB.
view full answer... - High Quality Trailer Clearance Light Recommendation that Only has a Single Power WireThe Optronics clearance light part # MCL95AB is what you are looking for. It's relatively cheap, LED so it will last a very long time, installs easily, and only has one wire for power of it.
view full answer... - Is There a Red Clearance Light With the Same Dimensions as the Optronics MCL95ABYes. The Optronics LED Clearance Light # MCL95RB is the red version of the Optronics LED Trailer Light # MCL95AB.
view full answer... - Red Version of Optronics LED Trailer Clearance or Side Marker Light MCL95ABWe have a version of the # MCL95AB in red with the part # MCL95RB.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Patrick B
Video Edited:
Dustin K
Video by:
Joshua S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
Installed by:
Cole B
Installed by:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Russell
1/31/2024
Still working great!!