Jack Recommendation for Trailer Frame that is 3.5 inch by 3.5 inch
Question:
What are the distances between holes? My current trailer frame is 3.5inch x 3.5. The distance between holes: Horizontal 5.5 Vertical: 4.5, 3.5, 2.5 Will plate of your jack fit frame of my trailer?
asked by: Marat B
0
Expert Reply:
The jack won't fit unfortunately since the max frame width it can fit is 3 inches but you could pretty easily go with a weld on jack like the Fulton # FXP10W0301.
expert reply by:
Jameson C
0
Products Referenced in This Question
Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Product Page this Question was Asked From
Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 12 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: Trailer Tire Sizing
- Q&A: 25-1/4 Inch or 26 Inch 4,000 lb Double-Eye Spring For Trailer With 25-1/2 Inch Eye Spacing
- Article: Trailer Maintenance Schedule
- Q&A: Dimensions of CE Smith Replacement Upright
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Trailer Jacks
Marat B.
4/20/2020
Are there any jacks in existence that would fit 3.5 x 3.5 frame except those weld on which I do not know what it is. Does it have to be physically welded to the frame?Is it that difficult to provide dimensions of the bracket on the site? It would eliminate some questions.