Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs
(98 reviews)
Price: $352.65
In Stock
Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs
Item # DL22339
Retail:$405.36
Our Price: $352.65
You Save: $52.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (98)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22339
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 12 Inch Lift
- With Wheel
- Steel
- Dutton-Lainson
Corrosion-resistant square swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip.
Features:
- Marine jack lets you raise and lower your boat or recreational trailer
- Square tube is stronger and holds more weight when compared with a round tube
- Convenient swivel-pin lets you pivot jack 90 degrees
- Swing up to stow parallel to tongue for travel
- Move back into upright position for use
- Extra-wide plastic wheel lets you easily move your trailer
- Tread pattern creates an off-road look
- Inner tube rotates with wheel allowing you to move in any direction
- Deluxe, all-black sidewind handle has cushioned grip
- Drain holes at bottom of inner post prevent water buildup
- Zinc TUFFPLATE finish protects components from corrosion
- 4-Bolt plate lets you easily mount jack to trailer frame
- Charcoal powder coat helps prevent corrosion
- Mounting hardware included
- Charcoal gray color
- Made in the USA
Specs:
- Application: trailers with a frame height from 3" to 4-1/2"
- Bracket height (from bottom of wheel to top hole of bracket):
- 16-5/8" Retracted
- 28-5/8" Extended
- Lift: 12"
- Lift capacity: 1,700 lbs
- Wheel dimensions: 8" diameter x 3-5/16" wide
- Pull pin diameter: 1/2"
- Tube diameter: 2-1/2"
- Handle radius: 6-1/8"
- 3-Year limited warranty
22339 Dutton-Lainson DLx-SW Square Swivel Tongue Marine Jack - 8" Diameter Wheel - Bolt On - 12" Travel - 1,700 lbs
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs - DL22339
Average Customer Rating: 4.8 out of 5 stars (98 Customer Reviews)
Corrosion-resistant square swivel jack is perfect for marine use and other trailer applications. The wheel is 3-5/16" wide for greater surface contact, and it turns 360 degrees for easy maneuverability. All-black handle has cushioned grip.by: Anthony 01/08/2024
Love this jack and always like shopping w etrailer.
by: Jason 01/22/2023
Super fast delivery and I’m very happy with my purchase!
by: Blake04/13/2024
Very well made product. Works perfect for 30' pontoon trailer. This will fit 5" tall frame tube. Just need to turn the bracket 90 deg from the normal position of smaller tubes.
by: Elizabeth 06/28/2023
This jack is robust and tolerating the salt well. A good solid jack makes a big difference when moving the trailer around the yard by hand.
by: W. LJ02/27/2024
Excellent quality. Perfect fit and everything was as promised. Highly recommend.
by: Mark05/06/2023
Tried many others and they failed but this Dutton Lainson has never failed yet.
by: Reinhold06/30/2022
I like this jack I’ve had many other jacks this one works smoothly better than others
Reinhold
7/2/2023
It’s been a year and I still say this trailer jackwheel is the best I’ve ever had and I’ve had a bunch of them over the years
by: Randy04/15/2020
Perfect fit. Much better jack than the OEM.
Randy
4/16/2021
Jack is awesome! Supports my boat very well. Extremely easy to roll in and out of my garage.
by: Mark 03/09/2020
Quality product and arrived almost entirely put together in the box. Bolting the side plate and jack onto the trailer only took a few minutes and it's very sturdy. Very little effort needed to crank it up and down. I have a 26' center console with about 500lbs of hitch weight and with the oversized wheel had no problem moving it around in the garage. Heavy pin and spring to lock it in the up position when traveling and down position when in use. LOVE the black color as it matches my trailer. Highly recommend.
by: Kelly 01/29/2020
Well I wanted to solid built Trailer Jack with a wheel
And I don’t think I could’ve gotten any better it is well built solid no worrying about it breaking as I am pushing the trailer around! Super satisfied
by: Francis 09/12/2022
Product matched description to a tee. High quality and just what my little camper needed for ease of hitching up/down.
by: Brandon 07/10/2020
Very well built. Got this for my 22' boat. Easy to install the only issue I ran into was either the bolt or the nut threads were bad and had to go to the local hardware store and get a new one. Otherwise, the jack itself is built very well.
by: Trent 07/12/2022
Fast delivery, item is exactly as advertised. They also honored their price pledge guarantee.
by: Glenn 08/24/2022
Very well made. Heavy duty ! Order went smoothly and delivery was quick.
by: Kurt 02/01/2022
REPLACED MY RANGER JACK WITH THIS AND IT MAKES IT SO MUCH EASIER.
by: Bruce 04/26/2021
This is the best jack I’ve ever had
by: Tim 01/21/2022
Sturdy & ergonomic, certainly better than the one I had on there previously :)
by: Evan 09/21/2021
Just received and installed but have not put to any significant use. Seams to be built extremely well.
by: Mark 07/10/2021
durable
by: Karl 05/28/2021
Just the right product
by: Gary 11/21/2023
by: Ron 01/28/2023
by: Samuel 01/11/2022
by: Brandon 10/26/2022
by: Peter 08/25/2022
25
98
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Mounting Hole Dimensions of Dutton Lainson Sidewind Jack # DL22339I attached a picture that has the measurements of the mounting holes on the mounting plate of the Dutton Lainson Sidewind jack # DL22339 that you referenced. Basically they are 5-1/2 inches from left to right and then 2-3/8 top to bottom row and then an additional inch for each of the others.
view full answer...
- US Made Swivel Side Mount Trailer JackThe etrailer brand # TJP-2002S-B is manufactured in China. We do offer some side mount trailer jacks from Dutton-Lainson that are manufactured in the USA. They don't offer a pipe mount jack, but they do offer a swivel pin mounted jack which would be much more stable. I'd recommend the part # DL22339 1700 lb capacity bolt-on jack. The jack also provides a caster to make maneuvering your trailer around while its being stored much easier. The jack is compatible with frame members that are...
view full answer... - Fit of Dutton-Lainson DL22339 Trailer Jack on a Ranger Trail Boat TrailerThe Dutton-Lainson # DL22339 Square Tube Swivel Jack isn't a trailer-specific part. It'll fit the frame member of your 2013 Ranger Trail boat trailer if the frame member is between 3 and 5 inches in height. I've linked you to a product demonstration video featuring the # DL22339 jack. The jack has a 1700 lb capacity, and the 8 inch caster wheel makes it easy to maneuver the trailer around when needed. The jack also features a grease zerk, which is a nice feature that isn't found an all...
view full answer... - Jack With Wheel Compatible with 500 Gallon Water Tank TrailerFor your trailer, the best option for a wheel is the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. This is rated for up to 5,000 lb trailer with 500 lb tongue weight. This is due to the pneumatic dual tires. Most trailer jacks with wheel are only rated for about a 1600 lb capacity maximum due mostly to the plastic wheel. The Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs # DL22339 is the most heavy duty option we offer other than the...
view full answer... - Length of Handle on Dutton-Lainson Square Swivel Jack DL22339I checked with the manufacturer, and the length of the handle is 7 inches on the Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel # DL22339.
view full answer... - Can the Bulldog Round, Weld-On Jack's Foot be Swapped with a WheelWe do have jacks that have a wheel instead of a foot. However, the Bulldog Round, part # BD151159, does not have the capability to swap the foot for a wheel. In fact, none of our jacks with drop-down feet can be swapped for wheels. Instead, you would have to use one that already has a wheel attached. Of course, those with the wheel have lower weight capacities and make use of a hand crank rather than electricity like the Bulldog Round. If that's the route you would like to take, I recommend...
view full answer... - Can Wheel Be Added To Fulton XLT Powered Drive Trailer Jack F141401?I may have a different option for you, but there is not a wheel kit available for the Fulton XLT Powered Driver Trailer Jack # F141401 you were looking at. The above jack is the only powered side mount jack offered but since no wheel is available you will need to decide on if you want a wheel or the power jack. If you decide having a wheel is more important I recommend the Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs # DL22339 due to it having the...
view full answer... - Are There Any American Made Trailer Tongue Jacks Available?We do indeed carry American made jacks. You will want to check out the Dutton-Lainson line. All of their jacks are made here except the Model 7201 # DL22320 and Model 3400 # DL22300. With that said, if you are specifically looking for an A-Frame jack, you will want to check out the Dutton-Lainson A-Frame Trailer Jack - Topwind - 5,000 lbs. # DL22772. This will have 14" of lift , but does not include a foot plate. If you prefer a foot plate, you will want the # DL22542, but if you wanted...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video by:
Chris R
Written by:
Matthew S
Installed by:
Jacob H
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jason
1/23/2024
Great, product is still working as desired with no issues.