bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Car Hauler
  4. Enclosed Trailer
  5. Fifth Wheel Trailer
  6. Gooseneck Trailer
  7. Utility Trailer
Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs

Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs

Item # TJD-7000S
Our Price: $99.07
Trailer Jack
Shipping Weight: 24 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. The drop leg offers 13-1/2" of lift on top of the 15-3/8" screw travel. Sidewind handle included. Great Prices for the best trailer jack from etrailer. Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs part number TJD-7000S can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (776)
  • Q & A (0)
  • Photos

etrailer Trailer Jack - TJD-7000S

  • Car Hauler
  • Enclosed Trailer
  • Fifth Wheel Trailer
  • Gooseneck Trailer
  • Utility Trailer
  • 6001 - 7000 lbs
  • Sidewind Jack
  • Weld-On
  • Leveling Jacks
  • Tongue Jacks
  • 28-7/8 Inch Lift
  • With Rectangle Foot
  • Steel
  • etrailer

Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. The drop leg offers 13-1/2" of lift on top of the 15-3/8" screw travel. Sidewind handle included.


Features:

  • Utility jack lets you raise and lower your trailer
    • Ideal for agricultural and commercial applications
  • Square jack provides more side-load capacity than round-tube jacks
  • Sidewind handle has zinc finish for attractive look and rust resistance
  • Drop leg allows for increased lift and saves time when raising or lowering
    • Pin and clip holds leg at desired location
  • Effortless greasing with built-in grease zerk
  • Black painted outer tube
  • Zinc finished inner tube and footplate for corrosion resistance
  • Welded-on footplate minimizes sinking in soft ground
  • Weld-on installation


Specs:

  • Height (from bottom of foot to top of jack):
    • 24-3/4" Retracted
    • 40-1/8" Extended
  • Total lift: 28-7/8"
    • Screw travel: 15-3/8"
    • Drop leg travel: 13-1/2"
  • Lift capacity: 7,000 lbs
  • Support capacity: 8,000 lbs
  • Outer tube width: 2-1/2"
  • Inner tube width: 2-1/4"
  • Footplate dimensions: 7-7/8" long x 6" wide
  • Handle radius: 7-3/4"
  • Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole
    • 3-1/2" Between center of hole on bottom and center of nearest hole
  • 1-Year warranty


DimsBracket

TJD-7000S Ram Square Direct Weld Jack w/ Footplate - Drop Leg - Side Wind - 15-3/8" Screw Travel - 7,000 lbs

Compare to Pro Series PS1400850383





Customer Satisfaction Score:


Customer Reviews

Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs - TJD-7000S

Average Customer Rating:  4.8 out of 5 stars   (775 Customer Reviews)

Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. The drop leg offers 13-1/2" of lift on top of the 15-3/8" screw travel. Sidewind handle included.

by:

Quick to order and ship. Price is right, product is great.

Dwight

3/2/2023

Day in, day out, always dependable!

Dwight

2/23/2024

We have used this jack for several years.The versatility of the leg and 15 of screw travel make it conveniently usable!



by:

7000 lb trailer jack with grease fitting is smoother than I expected. Great Value. Easy on line order and great shipping. Thanks for the attention to my order



by:

Just exactly what I was looking for excellent customer service it very quick delivery. Thank you Bay For your excellent customer service



by:

Great product and a Great company. There shipping is the best around.



by:

Jack was dented in shipping.It works fine so I just used it.



by:

This product is great! I bought it to repair a 2.5 x 20 inch bulldog jack that I bent. The insides fit like a glove. Even the gear mechanisms were the same.

Robert

8/25/2018

I use the product frequently and it works as expected. It seems quite durable and strong. I use it on an 18’ gooseneck trailer when I go logging.



by:

handle was slightly damaged in shipping, was shipped with multiple other heavy items and the box didn't hold up very well. Jack still works, drop leg saves on a lot of cranking.



by:

Haven't install yet, but looks as heavy duty as expected.



by:

this is what we needed to finish our small dump trailer. now if we find the time it would be great. really wish the drop leg jack was the one with foot pedal, but oh well. shipping was very fast. thank-you



by:

Perfect fit, exactly what I wanted. A lot of it had to do with my machine shop guy cutting the old one off and found superb work on welding back the new one, but it is hard to tell that there was a change from the original. 18 foot flatbed, double-axle, 4 ton capacity.



by:

Just what we needed, always a great price and fast shipping.



by:

received my product in a timely manner and happy with it at first appearance . WIll take now and have it welded to trailer.

Mark V.

12/7/2017

its worked great on our dump trailer over the past year , great product..



by:

High quality jack, especially for the price. I use it as a stabilizer on a flatbed truck with a crane on it. Excellent customer service as always from etrailer.com!



by:

I have not had a chance to use the products I ordered, however, I would like to comment on e-trailer's customer service.
It is outstanding!
I asked for a dimension that was not specified in any literature I could find.
So as a last ditch effort and without expecting much of a response, I sent the question.
Not only did George J send me an answer, he went to the warehouse, found one of the items, took an exact measurement, and created a page with a picture-diagram showing where the measurement was taken and the measurement and sent me the link.
I am seriously impressed.
Thank you George!
I don't generally see customer service like this anymore and it was sincerely appreciated.
I will look to e-trailers for all my needs of this type.
Thank you! Rating : ????????????



by:

I ordered these items for my DIY project, turning my bumper pull trailer into a goosenech trailer. The parts are of good quality and the delivery was quick. I would highly recommend for anyone who needs something for a DIY project to order from ETRAILER.COM
I went from that to this.



by:

This is the second trailer jack I have ordered from you. Excellent service and fair pricing.
Thank you.



by:

This thing is solid. The old landing gear was terrible. Huge improvement.



by:

We have installed this jack on 2 of our trailers and we like the way it works.



by:

Trailer jack very heavy duty construction. Shipped quickly.



by:

Cannot wait to have these installed on my car hauler to keep everything stable when I move my cars, trucks, tractors, etc.



by:

fast shipping, exactly what I ordered...



by:

Quick and easy to use, worked great on my trailer!



by:

I've ordered several items from ETRAILER. All items are shipped very quickly and quality has always met my expectations.

I will continue to use them as my trailer parts supplier.



by:

went right on direct replacement



by:

I love this Jack for my trailer


25
771
Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Replacement Lower Bushing And Washer For The Ram TJD-7000S Jack
    The Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 5,000 or 7,000 lbs Item # TJD-7000S-GR has the replacement pins in the kit. The washer can just be replaced with any washer that will fit over the shaft. You just want to make sure it is the same thickness as the bent washer. As far as the tube shaft bushing under the horizontal gear, unfortunately we do not currently offer that replacement part. It would require replacing the jack. I recommend going with...
    view full answer...
  • Can a Swivel Mount be Added to Square Direct Weld Trailer Jack # TJD-7000S
    Square Direct Weld Jack # TJD-7000S will weld directly to the trailer frame. To make it a swivel jack you would have to weld on pipe mounts such as # BD015279 and # BDPG9810-00. Or you could go with jack # TJDP-7000S-B that already has the mount welded to the jack and includes the pipe that gets welded to the trailer frame. I have linked a video review of this jack for you.
    view full answer...
  • Can Footplate be Rotated on etrailer.com Square Direct Weld Jack
    Yes, the footplate for the Square Direct Weld Jack # TJD-7000S can be oriented so that the wider section is facing either way for your trailer. There are holes in both directions for the jack itself that allow you to do this. I am attaching both pictures that you referenced as well as a review video that you can check out where this feature is highlighted.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Rod For etrailer and Ram Square, Direct Weld Jacks
    We currently offer the TJD-12000-ROD for your jack in a bundle with the lift nut with part # TJD-12000-RODNUT.
    view full answer...
  • Weld-On Square Trailer Jack with Rectangular Foot that Can Support 4,000 lb
    The etrailer jack part # TJD-7000S that you referenced would be your best option. It's a square jack with a rectangular foot that has a drop leg, has a 7k capacity, and since it's a weld on it can be mounted at the height you are wanting and can use the drop leg feature to get the jack closer to the ground as needed. There isn't a similar jack that has a wheel instead of the foot as they can't be made with higher capacities than around 1,000 lbs or so.
    view full answer...
  • Replacement Bushing For Etrailer.com Weld On Square Direct Weld Jack w/ Footplate
    I am happy to help you out. We do have the replacement bushing you are asking about for your Square Direct Weld Jack w/ Footplate, # TJD-7000S. That replacement bushing is part # TJD-7000S-BU.
    view full answer...
  • Installation Instructions for Square Direct Weld Jack # TJD-7000S
    I am attaching a picture of the instructions for your application to the product page. The instructions say to put the jack in the proper location for your trailer application, then weld on both sides of the jack length using a 3/16 inch fillet weld.
    view full answer...
    Image 1 for
  • Availability Of Replacement Gear Kit For Ram 2500 Series Side Mount Trailer Jack
    I reached out to my contact at Ram and he was able to confirm that the correct replacement gear kit for your Ram 2500 Series Side Mount Trailer Jack is the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 5,000 or 7,000 lbs # TJD-7000S-GR. I included a video of the # TJD-7000S-GR for you to take a look at.
    view full answer...
  • Is Replacement Internal Screw Available for Ram 7K Weld-On trailer Jack
    I spoke with my contact at Ram and they said that the internal screw for the 7K jacks are not something they carry replacements of so you will need to replace the whole jack. Even if this wasn't the case it would be a good idea to replace the entire unit anyways so that you can be confident all of the internal components are working properly. From what you described it looks like you either need part # TJD-7000S which is a weld-on 7K jack with a sidewind handle or part # TJD-7000 which...
    view full answer...
  • Will Drop Leg from Ram 7000 Series Jack Fit a Ram 8000 Series Jack
    If you are talking about the drop leg # TJD-7000-FT then it could fit your 8000 series jack as long as all the measurements match up. This jack is 2 inches square and the distance from the center of one adjustment hole to the center of the next is 3-3/8 inches.
    view full answer...
    Image 1 for
  • Is There a Replacement Screw and Nut for TJD-7000S Ram Sidewinder Jack
    The Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs # TJD-7000S does not have the replacement screw rod and nut assembly available as a replacement part. You will need to replace the entire jack. I recommend the Square Direct Weld Jack w/ Crank - Drop Leg w/ Spring Return - Sidewind - 25-3/4" Lift - 10K # TJD-12000SP-R2 which will have replacement parts should you ever need them. I've attached a video to assist.
    view full answer...
    Image 1 for
  • Recommended Keeper Pins for RAM 7000 and 5000 Series Jacks
    Hey Kelly, I went ahead and checked out all of those jacks and I believe I was able to find what you're looking for. So, for # TJDP-7000-B, # TJD-7000, # TJD-7000S, and # TJDP-7000S-B, you can use the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-PN; and for # TJD-5000 and # TJD-5000S you can use the Replacement Pull Pin for etrailer and Ram Pipe Mount Swivel Jacks # TJP-PN58.
    view full answer...
  • Trailer Jack Recommendation for Needing Trailer 32 inches Above Ground
    Best solution would be the etrailer jack part # TJD-7000S as it can lift up to 28-7/8 inches and since it's a weld on style jack without any hardware you could attach it at the height you need to get the addition 3-1/8 inches you'd need as well.
    view full answer...
  • Recommended Replacement Handle and Pin for a RAM 8000 Series Jack
    For your RAM 8000 Series jack # TJD-7000S, you can use the Replacement Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks # TJD-7000S-HD for a replacement handle and handle pin. If by pin you were actually referring to the footplate keeper pin, then you'd need the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-PN as well.
    view full answer...
  • Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000S
    I do have several replacement parts available for the RAM Trailer Jack part # TJD-7000S but not an all inclusive rebuild kit. Instead you will need to select from the components listed below and repair the jack as needed. The most common fault on the above trailer jack is the spider gears and in order to replace them you will want to use part # TJD-7000S-GR. The rest of the replacement parts we have for the jack are listed below. If you can identify what is not working on the jack I would...
    view full answer...
  • Caster Wheels for Jack Tubes
    That is not a model we carry, so I am unaware of specs for needed wheel. You will need to identify the diameter of the jack tube. We have caster wheels such as the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks, # PS1400750340. This castor wheel is designed to allow you to easily maneuver your trailer around but rated at 1,200 lbs. which is still significate capability for tongue weight. This removable caster has fitting for 2" jack tube. The, # JC-102 is a 6" caster...
    view full answer...
  • Does Replacement Bearing for etrailer Jack
    The Replacement Bearing for etrailer and Ram Square Jacks - 7,000 lbs # TJD-7000-BR is 1/2 inch; it is does not have a weight capacity itself, but is designed specifically as a replacement for the following 7,000 lb etrailer and Ram jacks: - Square Direct Weld Jack with Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs # TJD-7000 - Square Direct Weld Jack with Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs # TJD-7000S - Square Pipe Mount Swivel Jack with Footplate...
    view full answer...
  • What Is Weight Of Square Direct Weld Jack Item # TJD-7000S
    I do not have the exact weight of the Square Direct Weld Jack with Footplate, Item # TJD-7000S. However, it has a shipping weight of 24-lbs so it weighs around 20-lbs to 22-lbs. If you need to know weight capacity then it has a lift capacity of 7,000-lbs and a support capacity of 8,000-lbs. Let me know if you have other questions and I will be glad to answer them.
    view full answer...
  • Using Weight Distribution Hitch on Trailer with Side-Frame-Mount Jack
    In order to use a weight distribution/sway control (WD/SC) system it is necessary to have room on the trailer A-frame to mount the spring bar lift brackets and the hitch on the tow vehicle must specifically be rated for use with WD/SC systems. The hitch safety sticker will indicate if it is indeed rated for use with WD. As for the jack, it sounds like you have a side-frame-mount jack like # FXPD15L or one of the similar jacks of this type shown on the linked page. Some of these, like...
    view full answer...
  • Replacement Handle and Gears for the Square Direct Weld Jack w/ Footplate Part # TJD-7000S
    If you are referring to the Square Direct Weld Jack w/ Footplate part # TJD-7000S then the correct replacement handle is the Replacement Sidewind Handle part # TJD-7000S-HD and the correct replacement gear kit is the Replacement Sidewind Gear Kit part # TJD-7000S-GR. If the above is not the jack you are referring to then please let me know the make and model and I will see if we have any replacements parts for this assuming it is a brand we carry.
    view full answer...
  • Rebuilding etrailer.com Square Direct Weld Jack # TJD-7000S
    While we don't have a complete parts diagram for your Square Direct Weld Jack # TJD-7000S available, we do have a thorough installation video for rebuilding the jack that you can use for reference. I have attached the video to this answer page. This will show you exactly where all the inner components install, including the washer that you mentioned.
    view full answer...
  • Dimensions of Square Direct Weld Jack
    I went out to the warehouse to measure the Square Direct Weld Jack # TJD-7000S and found that the top square piece measures 2-3/4" so it will fit flush under your 3" x 3" angle iron. This jack will give your 15-3/8" of travel, has a lift capacity of 7,000 lbs and support capacity if 8,000 lbs.
    view full answer...
    Image 1 for
  • Gear Kit for Ram 8000 Series Trailer Jack
    The 8000 Series jack is # TJD-7000S. The replacement gear kit is # TJD-7000S-GR. If you'd like to verify you can measure the gears on your jack. The small gear is 1.331 inches for the outer diameter and 0.505 inches for the inner. Then the large gear is 1.703 inches outer and 0.595 inches inner./
    view full answer...
    Image 1 for Image 2 for
  • Replacement Handles for Ram Jacks
    It sounds like you have the RM0708DLJK Ram jacks which are very similar to the # TJD-7000S. You can use the Replacement Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks # TJD-7000S-HD as a replacement handle for your jacks.
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.