Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 2-1/2" - 5/8" Pin Hole

See what our Experts say about this etrailer Accessories and Parts

• Pipe Mount for Square Pipe Mount Swivel Jack
  The Square Pipe Mount Swivel Jack # TJDP-7000-B uses the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP58 which has a 2 inch inner diameter and 2-1/4 inch outer diameter. In the video the description is of the weld-on pipe mount which goes on the trailer, though it is understandably confusing.
  view full answer...
• Replacement Mounting Brackets for Square Pipe Mount Swivel Jack w Footplate TJDP-7000S-B
  In regards to the Square Pipe Mount Swivel Jack w Footplate part # TJDP-7000S-B, we offer both the Replacement Male Pipe part # TJP-OP58 and the Replacement Female Pipe part # TJP-FP58 but the chain and pin is not available separately. It just takes a standard 5/8" diameter pin like part # 325-GH-099.
  view full answer...
• Availability of Replacement Pipe Mount for RAM Trailer Jack
  Sounds like you are looking for our part number # TJP-OP58 which is the 2-1/2 inch pipe mount that has actually a 5/8 inch pin hole which is the standard size.
  view full answer...
• Tallest Available Pipe Mount Swivel Trailer Jack
  The tallest pipe mount swivel jack we offer is going to be the Round, Pipe Mount Swivel Jack w/ Footplate part # TJP-OP58 which measures 31-1/8" from the bottom of the foot to the center of the swivel while extended.
  view full answer...
• Correct Female Pipe For The Replacement Pipe For etrailer And Ram Mount Swivel Jacks
  Yes! The corresponding female pipe for the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP58 is the: -Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-FP58. Additionally, both of these parts are designed to work directly with the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000-B, so yes it will handle your 7,000lb trailer just fine.
  view full answer...
• Male and Female Pipe Mounts for etrailer Square Pipe Mount Swivel Jack TJDP-7000S-B
  The end that normally attaches to jack # TJDP-7000S-B is # TJP-OP58. It has an outer diameter of 2-1/2 inches and inner diameter of 2 inches. For a weld-on male end that has 5/8 inch pin holes to match the above female mount use # BD015279.
  view full answer...
• Thickness of Metal On Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks
  The thickness of the metal on the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks part # TJP-OP58 is 1/4".
  view full answer...
• Can a Leg/Foot be Added to the Pro Series Jack # PS1401440303
  We do have other swivel jacks with the same weight rating that will allow you to use a foot like part # FA88-00-4500, but since the Pro Series Jack # PS1401440303 that you referenced has the foot plate welded to the inner leg you will need to go with the Pro Series # PS1400800383 instead. You can have the pipe mount # TJP-OP58 welded to the jack and the pipe mount # BD005024 welded to your trailer so that the jack can swivel if that is what you are wanting.
  view full answer...
• Are the Replacement Pipe # TJP-OP58 and the Bulldog Weld-On Jack Pipe Mount # BD005024 Compatible
  Yes, I went out to the warehouse and verified that the Replacement Pipe # TJP-OP58 and the Bulldog 2-1/2" Long, Weld-On Jack Pipe Mount # BD005024 are compatible with each other. Review videos for both products have been linked for you to reference.
  view full answer...
• Can Pipe Mount be Welded on Without Damaging Jack?
  Pipe mounts such as the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP58 or Bulldog Replacement Pipe Mount for Swivel Jack # BD500339 are meant to be welded on to a swivel jack so there should not be any issues with damage to internal parts of your jack.
  view full answer...

Do you have a question about this Accessories and Part?