bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Car Hauler
  4. Enclosed Trailer
  5. Gooseneck Trailer
  6. Utility Trailer
Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs

Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs

Item # TJD-7000
Retail:$84.99
Our Price: $54.54
You Save: 36%
Trailer Jack
Shipping Weight: 22 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of the 15-1/4" screw travel. Foldaway handle included. Great Prices for the best trailer jack from etrailer. Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs part number TJD-7000 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (254)
  • Q & A (0)
  • Photos

etrailer Trailer Jack - TJD-7000

  • Car Hauler
  • Enclosed Trailer
  • Gooseneck Trailer
  • Utility Trailer
  • 6001 - 7000 lbs
  • Topwind Jack
  • Weld-On
  • Leveling Jacks
  • Tongue Jacks
  • 29 Inch Lift
  • With Rectangle Foot
  • Steel
  • etrailer

Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of the 15-1/4" screw travel. Foldaway handle included.


Features:

  • Utility jack lets you raise and lower your trailer
    • Ideal for agricultural and commercial applications
  • Square jack provides more side-load capacity than round-tube jacks
  • Topwind handle has a claw grip for comfortable, easy cranking
    • Easily folds away for storage
  • Drop leg allows for increased lift and saves time when raising or lowering
    • Pin and clip holds leg at desired location
  • Effortless greasing with built-in grease zerk
  • Black powder coated outer tube and zinc finished inner tube, footplate, and handle for corrosion resistance
  • Welded-on footplate minimizes sinking in soft ground
  • Weld-on installation


Specs:

  • Height (from bottom of foot to top of handle mount):
    • 24-1/4" Retracted
    • 39-1/2" Extended
  • Total lift: 28-3/4"
    • Screw travel: 15-1/4"
    • Drop leg travel: 13-1/2"
  • Lift capacity: 7,000 lbs
  • Support capacity: 8,000 lbs
  • Outer tube width: 2-1/2"
  • Inner tube width: 2-1/4"
  • Footplate dimensions: 7-7/8" long x 6" wide
  • Handle radius: 9-3/4"
  • Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole
  • 1-Year warranty


Dims

TJD-7000 Ram Square Direct Weld Jack w/ Footplate - Drop Leg - Top Wind - 15-1/4" Screw Travel - 7,000 lbs





Customer Satisfaction Score:


Customer Reviews

Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs - TJD-7000

Average Customer Rating:  4.8 out of 5 stars   (254 Customer Reviews)

Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of the 15-1/4" screw travel. Foldaway handle included.

by:

Works good. It is a lighter duty jack than was on trailer before, so it takes more cranking effort, but it's rated for the job and has been holding up well. The compact size is great compared to larger drop leg jacks.



by:

Old part stripped out. This one was a perfect replacement. Problem solved!



by:

Received, have not installed yet however I own 3 dump trailers and have owned several other and this looks/feels heavy duty and on or above par with others…
It’s going on my 6x12 dump trailer tomorrow.
I’ll put it to the test and update if that changes!



by:

I ordered the etrailer jack because it was considerably less than the Bulldog brand jack. I received my order very quickly. When I opened the package I was quite taken back by the quality of the Jack as well as the other items I ordered.

Glen A.

3/4/2020

After a year of use, I am still just as impressed as the day I received my trailer jack. Excellent product and great price!!



by:

we received jack at about 12:00 and had old jack which was round cut out and this jack installed by 1:30..great shipping and this jack is well made and I really like the grease fitting.



by:

fast shipping, great product.



by:

The item description was great I could pick out the exact replacement for my dump trailer. The old one got ripped off when we lost the trailer off the ball! Silly pin didn't put it's self in!



by:

Modified to work on a snowmobile lift. Works as planned



by:

Quality for the low price.



by:

Product came in a good package and in a timely manner. I had to replace the jack on my 14ft dump trailer. The new jack was easy to install if you can weld. Also added 2 thousand of lifting capacity. Plus the grease zirk made it a no brainer.



by:

The unit arrived well packaged and undamaged. Upon first inspection everything is good. I hope the grease fitting helps provide years of reliable service.



by:

The product appears to be heavy duty enough, still sitting in the garage I haven't put it on my brush chipper yet. I love buying stuff from etrailer it's so easy and quick.



by:

Well made product, great service from etrailer.
Very
helpful customer service when I called about some billing guestions.



by:

Just as described, great jack for the price thanks again etrailer



by:

Looks like it will do everything I need it to do and more



by:

Quality at a reasonable price.



by:

Excellent company. Box was in one piece and no damage to the jack.



by:

Exactly as described. Thanks!



by:

Worked great on my portable sawmill lot of use no problems.

Thanks



by:

This item worked out well for me, just as advertised.



by:

It is 10 times the jack for the money



by:

Excellent product. Highly recommend.



by:

Everything was great the customer service agent was very helpful and courteous and the product was everything that I needed I am very satisfied and we'll shop again thank you



by:

Good price and deliver on time ...strong thanks



by:

Exactly what I ordered and received in a timely manner, Thank you, needed in a much needed time!


25
254
Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Dimensions Of Replacement Drop Leg with Foot for etrailer and Ram Square Jacks
    The Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks is a 2" x 2" square tubing drop leg. The leg is designed as a replacement for the etrailer or Ram square Direct Weld Jacks with a 7,000 lb capacity like part # TJD-7000 however it can be used to replace other 2" x 2" drop legs as well. I have attached a video for your reference.
    view full answer...
  • Availability of Trailer Jack to Replace Shelby 6108
    We used to offer the Shelby jack 6108 and it had a capacity of 8,000 lbs and a top wind handle. Probably the closest we have now is the part # TJD-7000 which has a 7k capacity which SHOULD work well depending on the actual capacity needed for your application. I attached an install video for you to check out as well.
    view full answer...
  • Replacement Jack Leg for etrailer 7k Topwind Trailer Jack
    Sounds like you are looking for a replacement drop leg for the Square Direct Weld Jack w/ Footplate # TJD-7000 which is the # TJD-7000-FT.
    view full answer...
  • Replacement Jack Recommendation for Replacing Shelby 6108SW
    The closest jacks to the 8K Shelby 6108SW that we offer at this time are our Square Direct Weld Jack with Footplate, part # TJD-7000, and the 7.2K-rated Bulldog Square Jack # BD180354. For an 8K square side-wind jack we have Pro Series # PS1400860383.
    view full answer...
  • Availability of 5,000 lb Top Wind Trailer Jack with Grease Zerk Fitting
    The A-Frame Trailer Jack - Topwind - 5,000 lbs. by Dutton-Lainson # DL22772 does not have a grease zerk fitting integrated, sor do any of our other top wind jacks. This doesn't mean they are difficult to maintain, but they do not have that integrated feature. Normally the bigger square topwind jacks do have that feature like # TJD-7000 as well as some of the side wind Swivel jacks. I've linked the page to all your 5,000 lb Top Wind trailer jack options to assist. You can add the Replacement...
    view full answer...
  • Recommended Keeper Pins for RAM 7000 and 5000 Series Jacks
    Hey Kelly, I went ahead and checked out all of those jacks and I believe I was able to find what you're looking for. So, for # TJDP-7000-B, # TJD-7000, # TJD-7000S, and # TJDP-7000S-B, you can use the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-PN; and for # TJD-5000 and # TJD-5000S you can use the Replacement Pull Pin for etrailer and Ram Pipe Mount Swivel Jacks # TJP-PN58.
    view full answer...
  • Square Trailer Jack Recommendation that is 2-1/4 inch Outer Diameter
    The outer tube width of this jack is 2-1/2 inches by 2-1/2 inches but we do have the Pro Series jack part # PS1400800383 which has an outer tube diameter that is 2-1/4 inch by 2-1/4 inch and when fully retracted measures 23 inches which would be very similar to what you have. I attached a review video for this jack for you to check out as well.
    view full answer...
  • Welding Instructions for Install of etrailer jack part # TJD-7000
    I attached a picture of the instructions for welding on the etrailer jack part # TJD-7000 that you referenced. The instructions say to put the jack in the proper location for your trailer application, then weld on both sides of the jack length using a 3/16 inch fillet weld.
    view full answer...
    Image 1 for
  • Dimension and Weight Capacity of etrailer.com Side Mount Weld-On Jack
    The measurement of the jack you asked about # TJDP-7000S-B measures from crank to center of the pipe mount is 8-1/2 inches. The lift capacity of this jack is 7,000lbs and static support capacity is 8,000lbs. When using jacks like these, you are typically, only lifting the tongue weight (which is 10-15 percent of your total trailer weight) of the trailer so the higher rated ones will allow the jack's gears to work without strain. For a very similar top crank direct weld-on jack the etrailer...
    view full answer...
  • Is Replacement Internal Screw Available for Ram 7K Weld-On trailer Jack
    I spoke with my contact at Ram and they said that the internal screw for the 7K jacks are not something they carry replacements of so you will need to replace the whole jack. Even if this wasn't the case it would be a good idea to replace the entire unit anyways so that you can be confident all of the internal components are working properly. From what you described it looks like you either need part # TJD-7000S which is a weld-on 7K jack with a sidewind handle or part # TJD-7000 which...
    view full answer...
  • Does Replacement Bearing for etrailer Jack
    The Replacement Bearing for etrailer and Ram Square Jacks - 7,000 lbs # TJD-7000-BR is 1/2 inch; it is does not have a weight capacity itself, but is designed specifically as a replacement for the following 7,000 lb etrailer and Ram jacks: - Square Direct Weld Jack with Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs # TJD-7000 - Square Direct Weld Jack with Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs # TJD-7000S - Square Pipe Mount Swivel Jack with Footplate...
    view full answer...

Do you have a question about this Trailer Jack?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.