Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
(27 reviews)
Price: $6.39
In Stock
Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
Item # TJD-7000-PN
Retail:$7.59
Our Price: $6.39
You Save: 16%
In Stock
- All Info
- Reviews (27)
- Q & A (0)
- Videos (1)
- Photos
etrailer Accessories and Parts - TJD-7000-PN
- Camper Jacks
- Trailer Jack
- Pins and Clips
- etrailer
Replaces the pin that holds the footplate in place on your etrailer or Ram square, direct-weld jack. Designed for TJD-7000 Series jacks.
Features:
- Replaces the pin that holds the footplate in place on your etrailer or Ram square, direct-weld trailer jack
- Designed for TJD-7000 Series jacks
- Includes large pin, small pin, and chain
TJD-7000-PN Replacement Jack Foot Pin for Ram Direct Weld Jacks - 7,000 lbs
Video of Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer Trailer Jack TJD-7000-PN Review
Today we are going to be taking a look at a replacement foot plate keeper pin for eTrailer and Ram Square Direct Weld Jacks. This is designed specifically for the TJD-7000 series jacks, but it can be used for other applications as well. You just want to make sure that the specifications of this pin and this system match the specifications that you need. This is going to come with a large pin, a small pin, as well as a chain to keep the two connected that way you don't misplace it or lose it. The diameter of the pin, take a measurement of that real quick, that's going to give us a diameter of 9/16 of an inch. This is the safety pin that goes on the other side that secures it, so the usable pin length - what we are going to do is measure from the bottom of the head right here to the pin right here. That's going to give us the usable pin length for the unit.
- and that measurement is going to give us a measurement, it looks to be right around, 2 and 9/16 of an inch, so pretty close to 2-1/2 inches. That's going to do it for today's look at the replacement footplate keeper pin for eTrailer and Ram Square Direct Weld Jacks.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs - TJD-7000-PN
Average Customer Rating: 4.7 out of 5 stars (27 Customer Reviews)
Replaces the pin that holds the footplate in place on your etrailer or Ram square, direct-weld jack. Designed for TJD-7000 Series jacks.by: Richard 02/12/2024
Great Product, hard to find in my neck of the woods unless you drive 40 miles.
arrived on time as usual and the price was very reasonable. I always buy my trailer parts from E-Trailer.
by: Gina 02/13/2024
This was the only place I could get the correct size for our jacks. Perfect fit!
by: Robert 08/01/2023
Quick response to my inquiry and prompt service. The pin is s perfect fit at a good price.
by: Mike12/13/2023
Simple and easy!
by: David08/18/2022
Works great and it's easy to use! Yes there are other, possibly cheaper charging options, but this makes life easy and saves time. I simply plug in an extension cord and then check the charge after a day or so and done.
by: Gina 08/15/2023
Perfect fit for our jacks - fast delive ry!
by: Gary 08/18/2023
My first comment goes for all the items i purchased. Gary
by: John08/17/2023
Poor quality it’s just the truth seen a lot better
by: Michael 02/11/2024
Great
by: Lloyd 06/22/2020
Good quality well made product recieved on time .
by: Roger 07/09/2023
Very good
by: Andrew05/18/2020
Was shipped almost immediately after my order...and was exactly what I needed
by: Daniel01/12/2022
Quick turn around. Product as described
by: Arthur05/01/2018
Great price and for shipping… Thanks
by: Julian08/10/2023
by: William 10/29/2020
Perfect fit and high quality.
by: Arthur 12/30/2021
Great price and fast shipping… thank you
by: Mike 10/19/2023
by: 04/10/2024
by: Lance06/12/2022
by: Ralph 12/27/2022
by: Greg 12/13/2022
by: David03/12/2023
by: Ernie 05/12/2023
by: Michael 05/12/2023
25
27
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- etrailer Square Jack w/ Footplate to Replace Ram Side Wind JackThanks for the pictures! It looks like you have a Ram side wind jack and we do sell replacement parts for it. The jack you were looking at would be a great replacement for it if these parts do are not what you are looking for. The etrailer Square Jack w/ Footplate item # MJSQ-2500B is a bolt on, drop leg, sidewind jack. It has a 29-1/8" Lift and like your Ram jack is rated for 2,500 lbs. The rust-resistant, clear zinc finish protects against rust and corrosion caused by contact with water,...
view full answer...
- Recommended Keeper Pins for RAM 7000 and 5000 Series JacksHey Kelly, I went ahead and checked out all of those jacks and I believe I was able to find what you're looking for. So, for # TJDP-7000-B, # TJD-7000, # TJD-7000S, and # TJDP-7000S-B, you can use the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-PN; and for # TJD-5000 and # TJD-5000S you can use the Replacement Pull Pin for etrailer and Ram Pipe Mount Swivel Jacks # TJP-PN58.
view full answer... - Recommended Replacement Handle and Pin for a RAM 8000 Series JackFor your RAM 8000 Series jack # TJD-7000S, you can use the Replacement Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks # TJD-7000S-HD for a replacement handle and handle pin. If by pin you were actually referring to the footplate keeper pin, then you'd need the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-PN as well.
view full answer... - Replacement Jack Foot Pin for Easy Removal on Trails West Gooseneck Horse TrailerFor the leg of your Trails West Gooseneck Trailer, the Replacement Pin options depend on the diameter of your jack's pin. There are options that have chains or springs depending on that pin diameter. If you have a 5/8 inch pin diameter then # TJD-7000-PN is the best option. If you have a 3/4 inch diameter then # BD500337 is the best option. If you have a 3/8 inch diameter then you can use the spring-loaded pin # UF17-943031. If you have a 7/16 inch diameter then you can use the spring...
view full answer... - Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000SI do have several replacement parts available for the RAM Trailer Jack part # TJD-7000S but not an all inclusive rebuild kit. Instead you will need to select from the components listed below and repair the jack as needed. The most common fault on the above trailer jack is the spider gears and in order to replace them you will want to use part # TJD-7000S-GR. The rest of the replacement parts we have for the jack are listed below. If you can identify what is not working on the jack I would...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.