Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at a Replacement Drop Leg with the footplate for square trailer jacks. This is designed as a replacement for your etrailer or Ram Square Direct Weld Jack with a 7000lbs capacity. It's designed for use with the TJD-7000 series, and it can be used for other applications as well. It's going to be a steel construction. It's going to have a nice durable zinc finish on it, so it's going to do a great job at resisting rust and corrosion. It is a square design, so if we take a measurement, outer edge to outer edge, that's going to give us a measurement of right at 2", so it's going to measure 2" by 2". The drop legs are designed to slide into the inner tube of the jack and secure with a pin and clip.
What this does is, it's going to give you more flexibility and adjustment when it comes to the height of your trailer jack. The footplate, it's going to be welded to the bottom of the drop leg. The footplate's going to give us a measurement, go in this direction, of about 6", and then go in this direction, it's going to measure about 8", so it's a nice large size. It's going to do a great job at spreading out the applied weight, even on softer ground, which is going to help prevent sinking. It also helps increase overall stability.
The drop leg is going to offer an additional 13-1/2" of travel. We can tell that by taking a measurement from the center of this hole right here, to the center of this hole. If we do that measurement, we can see that center-on-center is right around 13-1/2", so that means that it's going to be able to be adjusted in about 3-3/8" increments. The 3-3/8" measurement is going to be the distance that we have between each hole, center on center. Taking a look at the overall height, measuring from the bottom of the foot to the top of the tube, that's going to give us a measurement. Looks to be about 17-3/4".
That's going to do it for today's look at the Replacement Drop Leg with the included footplate for square trailer jacks.
Average Customer Rating: 4.9 out of 5 stars (49 Customer Reviews)
Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.Purchased the drop leg with foot to stabilize the rear of my trailer when loading and off loading tractor. Product shipped early and delivered as promised. Used a 5/8” implement pin and custom cut sleeve out of 2 1/4” channel. Works great.
fit the application fine
Great quality products and super fast s hipping.
Excellent quality on the parts!!! Shipping was super fast!!! Definitely my "go to" trailer place
As Advertised. Excellent Product!
Web site was easy and we received order extremely prompt!!!
Seemed Good... Bought for Resale!!
It arrived right on time perfect fit already installed
Good quality & strong weld. Not a many holes as I'd like but it'll work just fine. I wish it was longer,like the one I took out.
Quick fast service w/ the products i ne eded!
Perfect fit, Well made and shipped fast!
Excellent fit for my trailer jack. My used trailer was missing this part when I purchased it. This is really stout and shouldn’t rust.
product is good the over night shipping is not. showed up to late to use the product.
Perfect fit. Made of quality material, I had to drill out the holes for my pin to fit but no problem. Very satisfied.
Product was exactly what I needed!! It is being used on my personal boat trailer, and is used several times a month!!
The service was wondeful and I thank Sal M for his help. I got the order when they said I would get it. I couldn't give you a 5 star because the adjusting holes are twice what was one the trailer. I would have liked them closer together so the customer would have had a closer adjusting ability. Sal did a wonderful job in changing the order for me.
Nicely galvanized drop leg.
Looks just like the photo
Fast shipping as usual. Legs look good, we will make sockets for them to slide in and mount to trailer.
Replacement part perfect. Customer service even better.
Excellent replacement for the item requ ested.
Worked great on my Twinstar hay rake!
Looks good
Worked just like the original
good product as described arrived on t ime.
Great product. Fit and performed as expected
Do you have a question about this Accessories and Part?
Condition: Installed
Notes: Item has been previously test fitted and has minor cosmetic signs of install/ use including sratches/scrapes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.