Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this replacement rod and nut. This is going to replace the threaded ACME rod and lift nut on your etrailer or Ram Square Jack, Direct Weld jacks with a 10,000 pound lift capacity and a 12,000 pound static capacity. This is designed for the TJD-12000 series jacks, so you just have to remove your old one and place this new one in with all of your bearings and other components installed. You will have to reuse your old components, or you can pick up new ones here etrailer.com if you need them. Let me lay this down here real quick and give you some overall dimensions. So looking at the overall length simply from end to end we are sitting right at 17 1/5 inches long, and the diameter is one inch, and the lift nut is 3 1/2 inches by 3 1/2 inches.
And so if you are needing to replace the rod and lift nut in your etrailer or Ram Square jack, specifically the TJD-12000 series, this is going to be exactly what you need. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Average Customer Rating: 4.6 out of 5 stars (189 Customer Reviews)
Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.The jack screw nut on my Big TEX 14k trailer got stripped when it was bottomed out.This unit is a great replacement and arrived from eTrailer a day early. The unit arrived with the grease dish located on the bottom side of the nut, but it was easy to relocate so it matched the original unit and the advertised foto. I would certainly order from etrailer again.
The product will not work for our jack as the top shaft is too short (shorter than our original shaft on the top). The rod itself is the right size overall but where you put your bearing and spacer is not long enough for the bearings and spacer we have from the original. We are trying to find a thinner bearing that might work otherwise we will have to buy a whole new jack. (unfortunately the placard that was on the original jack is rub off so we don't know the exact brand that we have but it came off an older model 4 horse gooseneck trailer so no telling what model it is0.
Rebecca
2/16/2024
We unfortunately werent able to use it as it wouldnt work for the jack we had,
Mike L.
2/16/2024
My 2017 Big Tex 14k equipment trailer jack would not lift my trailer. I finally got tired of using a jack and took it apart after watching the rebuild video here on eTrailer.com. I then found my jack was stripped. I ordered this part, it fit perfect and fixed my trailer!
Daniel
3/2/2021
Still working like new! Thanks etrailer!
It was easy to remove & replace watched the video just to make sure I did everything right. Received the part a little late, but that was due to weather. Overall Excellent service and understanding when ordering part!
Wilbur
2/7/2024
Working great!
Correct lift nut to repair my Big Tex 14ET trailer jack, the bearing dust cover did not fit so I used the old one. Packaging could have been better.
Great place to find parts you need for your trailer pricings right shipping fast even through USPS. I got it in three days. Thank you.
Product saved me a lot of money so that I could repair my jack instead of buying a new one. Ordering was easy and delivery was fast.
The leadscrew stripped out on my Delco 14k 20' trailer, and I really didn't want to cut the 10k jack off and weld on a new one. The label on the jack had white letters PRO with blue around them, and it looked a lot like the jack you sell:Checking through the product page and Q&A for this leadscrew the measurements looked right. It was an exact replacement and not too bad to replace. Hope this helps if someone else has a Delco trailer with a similar jack.
Fast delivery. Actually haven't installed the new hitch because the replacement parts took care of the problem with our old one. Very happy with this company and would highly recommend for any trailer parts.
This replacement rod & nut assembly worked perfectly! Easy to replace following the video posted on their website!
Item arrived in good time, exact match and installation went well.
Kevin
10/26/2023
It is holding up well and working smoothly!
Easy replacement
Not what I ordered
Jenny N.
11/2/2022
Thank you for sending the picture and letting us know. Customer Service will be in touch with you.
It's compatible with my 2020 Big Tex trailer jack.
Absolutely the best customer service.
The product was as advertised.
Quicker than expected delivery.
Ordered item two weeks ago, still waiting. If you’re in a hurry please find someone else. No refund, no parts till they hold you up for two weeks waiting. Then maybe they’ll look into it.
My first time dealing with this company and it’s been amazing, easy to order off their website and they provided very prompt updates and order status
Received unit earlier than expected. The part received did replace our old unit even though it was a smaller diameter by 1/4 of an inch which didn't make a difference at all! Hopefully will last a long time. Thank you Terri N
Delivery estimate wasn’t even close the part worked great
I received the part quickly and it fit perfectly.
Fit right in and shipped really fast
Fit perfectly on my Big Tex 14TL replacing my stripped screw drive. Easy to install and a lot cheaper than replacing the whole leg!
Great help in finding the parts I needed
Shipped quickly and great part. Finally have my jack working again!
Great on time delivery!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Vince
10/24/2023
working fine