Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin
(16 reviews)
Price: $25.21
In Stock
Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin
Item # BD500339
Retail:$28.75
Our Price: $25.21
You Save: 12%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (16)
- Q & A (0)
- Photos
Bulldog Accessories and Parts - BD500339
- Camper Jacks
- Trailer Jack
- Pipe Mounts
- Bulldog
Weld the U-bracket portion of this pipe mount to your swivel jack so that the jack can be attached to the female pipe on your trailer. Pin hole is 5/8".
Features:
- Tube provides attachment point for your pipe-mount swivel jack
- Male pipe pairs with pipe on jack so you can swing jack down for use and up for travel
- Raw finish is ideal for welding
- U-bracket portion welds onto your jack
Specs:
- Diameter:
- Outer: 2-1/2"
- Inner: 2"
- Pin hole diameter: 5/8"
- Length:
- Longer edge to center of pin hole: 1"
- Shorter edge to center of pin hole: 1"
- Depth of end without welded bracket: 2-1/4"
- Depth of end with welded bracket: 3-1/2"
- Bracket dimensions:
- Outer width: 2-3/4"
- Inner width: 2-1/4"
- Height: 2-5/8"
- Depth from bracket to outer weld: 2"
500339 Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin - BD500339
Average Customer Rating: 5.0 out of 5 stars (16 Customer Reviews)
Weld the U-bracket portion of this pipe mount to your swivel jack so that the jack can be attached to the female pipe on your trailer. Pin hole is 5/8".by: 02/12/2024
Slightly larger than the 2" square channel, but worked fine. Would buy again.
by: Henry O08/21/2021
Working great, fits over tube or channel which makes it easy to make square.
by: Troy04/27/2021
First I would like to point out the customer service I have received has been exceptional. Kudos to your staff, especially Odelia who is have dealt with primarily.
by: Brad11/22/2018
Your service for product on hand is outstanding, meaning that when looking for a part, you guys have it in stock. The shipping department is outstanding. I had placed my order, and I had confirmation within one hour that it was on its way to my house. That's great service, my next order of any kind of trailer parts will be no where else other than etrailer.com. My welding project for these parts is not done yet, do to the Thanksgiving holiday. When done I will forward my pictures to you.
by: Anson08/12/2021
This pipe mount is the best way I found to securely mount my trailer jack, very well made.
by: Janet11/17/2020
I appreciate working with etrailer.com and the excellent customer support. Highly recommend!
by: Lucas04/13/2018
Worked perfectly for my application.
by: Mark 08/04/2022
Perfect fit
by: Barry 08/23/2022
great
by: JImmy Neese02/02/2015
Great getting you the right parts
by: Chris11/04/2018
exactly what i needed
by: Jimmy 08/09/2023
by: Brad 03/28/2024
by: Brian 09/15/2021
by: Dave 04/11/2021
by: Troy 11/14/2021
16
16
See what our Experts say about this Bulldog Accessories and Parts
- Which Mount For Bulldog Round Jack No Mount BD170205It sounds like you are looking for the Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin # BD500339 which gets welded to the trailer jack and has 4 holes allowing you to fold the jack up or down. The # BD500339 will need to get welded to the Bulldog Round Jack - No Mount - Sidewind - 15" Lift - 5,000 lbs # BD170205 you were looking at and will fit into the matching mount on your trailer. The # BD170205 does not include a foot plate or caster so you will also need...
view full answer... - Available Bolt-On Trailer JacksThe replacement jack pipe mounts we offer like Bulldog # BD500240 and # BD500339 are only offered in weld-on versions. We do have many bolt-on jacks that you can see on the linked page. These include items such as the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # FXPD15L.
view full answer... - Recommended Versatile 1,500 Pound Foot Plate or Wheeled Trailer JackSounds like you are looking for a Bulldog Round Jack # BD170205. This jack has no mount or foot plate for the ultimate versatility. This jack has a lift capacity of 5,000lbs and a lift of 15 inches. You can buy the weld on mount # BD500339 and a foot plate # BD018098. or wheel # JC-102 to transform your standard jack to a rolling with the ease of just a snapper pin. I have linked a video for you to see just how easy it is. It's important to know that you will be limited by your lowest...
view full answer... - Pipe Mount for Square Bulldog Jack Compatible with DimensionsThe Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin, # BD500339 is for square jack mounting. The mount measures 2-1/4 inches wide which is the tubing width of the Bulldog Square Jack # BD195352 and # BD195368 you referenced. The weld on male mount compatible with this is the Weld-On Male Mount Kit for Bulldog Round Jack # BD500240 you also referenced which has a 2 inch outer diameter. I've attached photos to assist further.
view full answer...
- Will Bulldog Replacement Pipe Mount for Swivel Jack Work with My Trailer JackThe Bulldog Replacement Pipe Mount for Swivel Jack - Weld On # BD500339 referenced in your question will provide an attachment point for a pipe-mount swivel jack. The male pipe pairs with the pipe on your jack. The inside diameter of the Pipe Mount is 2 inches and the outside diameter is 2-1/2 inches. You will just need to take these measurements on your jack to ensure this will work. I have attached an image with these dimensions labeled for you to look at.
view full answer...
- Width of Bulldog Replacement Pipe Mount for Swivel Jack Where it Attaches to TrailerOn the Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin, # BD500339, the square mount measures 2-1/4 inches wide.
view full answer...
- What Is the Inside Width of the Bulldog Replacement Pipe Mount for Swivel JackThe inside width of the u-bracket portion for the Bulldog Replacement Pipe Mount for Swivel Jack part # BD500339 is 2-1/4" which you can see in the photo below. I don't have any that are 2-1/2" so I'd suggest the Bulldog 2-1/4" Long, Weld-On Jack Pipe Mount for 2-1/2" Female Mount and 5/8" Pin part # BD015279.
view full answer...
- Tube Diameter of Bulldog Replacement Swivel Jack Pipe Mount # BD500399The inside diameter of the Bulldog Replacement Swivel Jack Pipe Mount is 2 inches, the outer diameter is 2-1/2. This mount is designed to mount onto a trailer, and accept the female pipe mount on a swivel jack.
view full answer...
- Can Pipe Mount be Welded on Without Damaging Jack?Pipe mounts such as the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP58 or Bulldog Replacement Pipe Mount for Swivel Jack # BD500339 are meant to be welded on to a swivel jack so there should not be any issues with damage to internal parts of your jack.
view full answer... - Pipe Mounts for 5K Bulldog Square Trailer JackWhat you are describing is called a pipe mount for a swivel jack. We have some such as # BD500339. The inner tube diameter is 2 inches and it uses a 5/8 inch pin, # BD500231. If you need the other end that mounts to the trailer it is # BD015279.
view full answer... - What are the Measurements of the Bulldog Replacement Mount SwivelOn # BD500339 outside diameter of the pipe measures 2-1/2 inches. The inside diameter of the pipe measures 2 inches.
view full answer...
- What is the Width of the Square Mount of the Bulldog Replacement Pipe Mount # BD500339On the Bulldog Replacement Pipe Mount for Swivel Jack - Weld On - 5/8" Pull Pin, # BD500339, the square mount measures 2-1/4 inches wide.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Manda E
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Henry O.
10/31/2022
Great quality product for welding onto a round pipe .