Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 5/8" Pin Hole

See what our Experts say about this etrailer Accessories and Parts

• Replacement Mounting Brackets for Square Pipe Mount Swivel Jack w Footplate TJDP-7000S-B
  In regards to the Square Pipe Mount Swivel Jack w Footplate part # TJDP-7000S-B, we offer both the Replacement Male Pipe part # TJP-OP58 and the Replacement Female Pipe part # TJP-FP58 but the chain and pin is not available separately. It just takes a standard 5/8" diameter pin like part # 325-GH-099.
  view full answer...
• Parts Used To Create The Square Pipe Mount Swivel Jack With Footplate
  If you are looking for the parts needed to mount the jack # TJDP-7000S-B, the parts are already included in the packaging. To mount, place female pipe # TJP-FP58 in the proper location for trailer application. Weld on all the way around the female pivot pipe with 3/16" filet weld. Just in case you need it, I have the breakdown of the parts used to create the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B. You will need Replacement Drop Leg with Foot for etrailer and Ram Square,...
  view full answer...
• What Material is The Drop Leg On The Square Pipe Mount Swivel Jack # TJDP-7000S-B?
  Yes, the drop leg on the Square Pipe Mount Swivel Jack # TJDP-7000S-B is steel. The parts have a zinc finish so you will need to clean off the finish where you intend to weld so the weld does not get contaminated with the coating and be sure the area is well ventilated since the coating can be hazardous. We do have the Weld-On Pipe # TJP-FP58 which fits this jack for additional mounts.
  view full answer...
• Pipe Mount for Square Pipe Mount Swivel Jack
  The Square Pipe Mount Swivel Jack # TJDP-7000-B uses the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP58 which has a 2 inch inner diameter and 2-1/4 inch outer diameter. In the video the description is of the weld-on pipe mount which goes on the trailer, though it is understandably confusing.
  view full answer...
• Correct Female Pipe For The Replacement Pipe For etrailer And Ram Mount Swivel Jacks
  Yes! The corresponding female pipe for the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP58 is the: -Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-FP58. Additionally, both of these parts are designed to work directly with the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000-B, so yes it will handle your 7,000lb trailer just fine.
  view full answer...

Do you have a question about this Accessories and Part?