Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 9/16" Pin Hole
(19 reviews)
Price: $16.41
In Stock
Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 9/16" Pin Hole
Item # TJP-OP916
Our Price: $16.41
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (19)
- Q & A (0)
- Videos (1)
- Photos
etrailer Accessories and Parts - TJP-OP916
- Camper Jacks
- Trailer Jack
- Pipe Mounts
- etrailer
Replaces the female pipe mount on your etrailer or Ram pipe-mount swivel trailer jack. 9/16" Pin hole diameter.
Features:
- Replaces the female pipe on your etrailer or Ram pipe-mount swivel jack
Specs:
- Diameter:
- Outer: 2-1/2"
- Inner: 2"
- Pin hole: 9/16"
- Length:
- Longer edge to center of pin hole: 1"
- Shorter edge to center of pin hole: 3/4"
- Depth of end without welded bracket: 2-1/8"
- Depth of end with welded bracket: 3-1/4"
- Bracket dimensions:
- Outer width: 2-3/4"
- Inner width: 2-1/4"
- Height: 3"
- Depth from bracket to outer weld: 1-3/4"
TJP-OP916 Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 9/16" Pin Hole
Video of Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 9/16" Pin Hole
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Replacement Female Pipe Mount - TJP-OP916
Hi, everybody. Andy here with etrailer.com and today we're gonna take a brief look at this replacement female pipe. This is going to replace the female pipe mount on your etrailer or ram pipe mount swivel trailer jack. And just so you can be confident that this is going to work for you, I'm gonna retrieve my ruler here and provide some overall measurements for you. So looking at the diameter first, we are sitting right at two and a half inches outer diameter. And then the inner diameter we are sitting at two inches.
And then this has a 9/16 of an inch pinhole diameter. And then taking a look at the bracket here, the outer width, we are sitting at two and 3/4 inches. And then the inner width, we're sitting at two and 1/4 inches. And then the overall length of the entire pipe, we are sitting right at about three and 1/4 inches overall. And then the overall height, we are sitting right at three inches.
Now I wanna throw a diagram up there for you on the screen just to give you some other measurements that you might find helpful that I did not cover with you. And you can also find this diagram on this product page if you need to take a look at it further. But there's some smaller measurements there that you might find helpful to further help you determine if this is going to work for you. Well that's gonna conclude our brief look today. I do hope that it was helpful for you.
Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 9/16" Pin Hole - TJP-OP916
Average Customer Rating: 4.7 out of 5 stars (19 Customer Reviews)
Replaces the female pipe mount on your etrailer or Ram pipe-mount swivel trailer jack. 9/16" Pin hole diameter.by: Burl03/05/2024
I have not had a chance to use the product yet but I like the way these people operate, you know, like real people.
by: Att:10/12/2023
WORK INCONJUNTION WITH THE JACK AS INTE NDED
by: John 01/14/2020
Etrailer is great! There web site is easy to use. I called them because I couldn't find a part I was looking for. The Person that help me was very helpful and took the time that was needed to solve my problem.
I will definitely use them again for all the trailer parts I need.
John
by: Dave 08/10/2022
I'm so appreciative that this product is offered. Sure beats trying to make one. Weld it on my trailer jack lower than the factory one, Then I can use lower one on the fish house and the factory (Higher) one for the log splitter. Will truly be a back saver.
by: Richard03/17/2023
Worked out great, time will tell how well it holds up
by: Jeffrey 02/02/2023
Extremely well built and rugged! This was a hard part to find locally. Price was very impressive and comfortable.
by: Rezac09/20/2020
It is the closest thing that I can find for the purpose that I am using it for a travel trailer. It looks like it’s heavy duty steel.
by: Allen09/26/2022
Works as expected as described, nice fit to weld on
by: Thomas 10/29/2021
Easy to weld <> this item is heavy duty!!
Thank you...
by: Ryan O04/18/2020
Product came as described and shipped f ast
by: Barry01/04/2019
just what i need to make jack swing
by: Brian 08/17/2022
by: Josh 12/08/2023
by: Bob 11/03/2023
by: John12/06/2023
by: Ray 08/30/2023
by: Jeremy 08/28/2021
by: Jerry 11/16/2022
by: William 06/29/2023
19
19
See what our Experts say about this etrailer Accessories and Parts
- Weld-On Pipe Mount For The TJP-5001S-B Round Pipe Mount Swivel JackWe have just the thing! The Replacement Male Pipe # TJP-IP916 is going to be the correct weld-on male pipe mount for the # TJP-5001S-B jacks. If you need the female side to weld to the jack itself it will be part # TJP-OP916.
view full answer... - Mating Male Pipe for Female Pipe for etrailer and Ram Pipe Mount Swivel JacksThe male part that mates with the Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-OP916 is Replacement Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks # TJP-IP916.
view full answer... - Is Male Pipe for etrailer and Ram Pipe Mount Swivel Jacks AvailableWe do. You need part # TJP-IP916 for the male pipe that fits with the female # TJP-OP916.
view full answer... - Swivel Mount Trailer Jack Brackets for Weld-On InstallationThe female version of the Bulldog Replacement Pipe Mount for Swivel Jacks # BDPQM1900 isn't available separately and only comes already installed on the trailer jacks, like what we see with part # BD195362. If you're needing a weld-on bracket to your trailer as well as the jack then I recommend checking out the etrailer round versions, Male # TJP-IP916 and Female # TJP-OP916, which can be installed on a 2-1/4" trailer jack frame.
view full answer... - Parts Needed To Mount A Tube-Style Swivel Jack To A Trailer Frame To mount the Bulldog Round Jack without mount # 150010 to a trailer frame you would need to use weld on a female swivel pipe # TJP-OP916 to the jack. If you trailer doesn't have the male swivel pipe then you would need to weld part # DL22670 onto the frame as well. If you don't know how to weld or would prefer not to pay for someone else to do it then you can also just get a similar jack with the swivel components already attached like part # TJP-2002S-B.
view full answer... - Availability of Replacement Jack Pipe Mount # TJP-OP916We do carry the replacement pipe mount you are looking for part # TJP-OP916.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Manda E
Written by:
Amanda M
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dot Z.
1/15/2021
I love this company. They have a large ion of products at good prices