Caster Wheels for Jack Tubes
Question:
I have a ram 5000 trailer jack. Can I put a wheel on it so I can push the trailer around
asked by: Gary P
Expert Reply:
That is not a model we carry, so I am unaware of specs for needed wheel. You will need to identify the diameter of the jack tube. We have caster wheels such as the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks, # PS1400750340. This castor wheel is designed to allow you to easily maneuver your trailer around but rated at 1,200 lbs. which is still significate capability for tongue weight. This removable caster has fitting for 2" jack tube.
The, # JC-102 is a 6" caster for 2-1/4" jack tubes (2" inner diameter).
Please note the linked product review videos below.
Products Referenced in This Question
Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- etrailer
more information >
Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- 2 Inch Diameter Tubing
- Pro Series
more information >
Product Page this Question was Asked From
Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Fifth Wheel Trailer
- Gooseneck Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 6001 - 7000 lbs
- Sidewind Jack
- 28-7/8 Inch Lift
- Weld-On
- With Rectangle Foot
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Sidewind Handle for etrailer and Ram Swivel Marine Jacks - 1,500 lbs
- Video: etrailer Trailer Jack MJ-1500B-HD Review
- Video: etrailer and Ram Swivel Marine Jacks Rebuild
- Shop: Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks - 1,200 lbs and 1,500 lbs
- Shop: Removable, 6" Dual Poly Caster Assembly for etrailer or Ram Jacks - 1,500 lbs
- Q&A: Replacement Handles for Ram Jacks
- Q&A: Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000S
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer jack
- Search Results: 25580
- Shop: Trailer Wiring
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Brake Controller
- Q&A: Recommended Complete Flat Towing Setup for a 2021 Chevrolet Blazer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: safety chains
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Search Results: jack
- Shop: Fifth Wheel Hitch
- Search Results: trailer brake controller