Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
(27 reviews)
Price: $172.67
In Stock
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
Item # KH84545S
Our Price: $172.67
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (27)
- Q & A (0)
- Photos
Kodiak Trailer Hubs and Drums - KH84545S
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Standard
- 1/2 Inch Stud
- L44649
- L68149
- Kodiak
Rustproof stainless steel hub is ideal for extended marine use. Fits 3,500-lb axles with #84 spindles. Can be used on idler axles or can be paired with a 10" slip-on rotor for disc brake applications. 1/2" Wheel studs are included.
Features:
- Marine-grade trailer hub assembly can be used on an idler axle or can be paired with a 10" slip-on rotor for disc brake applications
- Stainless steel construction is durable, rustproof, and low maintenance
- Ideal for use on a boat or snowmobile trailer
- Great for saltwater applications
- Wheel studs are long enough to accommodate an over-the-hub brake rotor or a custom wheel with a thick mounting face
- Races included - bearings and seal sold separately
Specs:
- Application: 3,500-lb trailer axles
- Spindle: #84
- Bolt pattern: 5 on 4-1/2"
- Wheel stud dimensions: 1/2" diameter x 2" long
- Bolt size: 1/2"-20 UNF-2A
- Weight capacity: 1,750 lbs
- 6-Year warranty
Bearing, Race, and Seal Information
- Bearings (sold separately)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (Included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (sold separately): 58846 or 10-19
Superior Corrosion Resistance for Marine Use
This trailer hub assembly is constructed of corrosion-resistant, rustproof stainless steel. It's superior construction makes it the best choice for use on your boat or snowmobile trailer. Stainless steel is durable enough to last in freshwater environments, but it can withstand saltwater applications as well. Even after extended use in saltwater, it shows little to no rust or corrosion.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
H-84545-SS Kodiak Stainless Steel Trailer Hub with Races for 3,500-lb Axles
Replaces HUB-84545-SS
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- etrailer mistake
Customer Reviews
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel - KH84545S
Average Customer Rating: 4.7 out of 5 stars (27 Customer Reviews)
Rustproof stainless steel hub is ideal for extended marine use. Fits 3,500-lb axles with #84 spindles. Can be used on idler axles or can be paired with a 10" slip-on rotor for disc brake applications. 1/2" Wheel studs are included.by: Grigg10/31/2023
Caution about wheel size.
Listing says works with "15 Inch Wheel".
Hub flange is 6" diameter although not specified in the listing.
Some (many?) 15" wheels actually need 6.5" hub flange diameter, mine sure do. Measure the outside diameter of contact surface on back of wheel, see what diameter is needed to support it fully.
If you add a brake rotor then yes, they probably do work with 15" wheels.
Otherwise they're pretty nice hubs, although expensive.
Cheap no name bearing races installed, like most hubs.
If you're going all out with stainless hubs why not also US made Timken bearing races and bearings
by: Mark11/20/2023
Good quality overall and installed without any issues. But be aware that the studs were short when installed with the Kodiak stainless brake rotors, and not as long as the glamor shots show. The ends of the studs just barely protrude from the nut when fully torqued. I didn't get to measure them, but I question if they're 2 inches like the specs say.
by: Rick K10/21/2017
Changed out my old standard steel oil bath hubs for stainless steel and grease hubs. The site was very helpful in selecting the correct parts. The swap out and installation went well (except for a frozen lug nut). Since I launch the boat in saltwater most of the time, I am looking forward to hubs that aren't constantly rusting.
Thanks etrailer!
by: Matthew 06/06/2023
Hubs are working great! No corrosion issues and are working great.
by: R.E.G.G. Distributor Services, LLC05/15/2023
Excellent customer service, on time delivery!!! Every sales person was wonderful and very helpful. Thank you for the great service.. 145 hubs all accounted for with no discrepancies noted.
by: Andy 07/10/2023
Looks well made, it will be nice to replace my old, rusty hubs.
by: J02/23/2018
great hubs I have them on a snowmobile trailer. Stainless steel is a must on a snowmobile trailer. It's disappointing trailer manufacturers don't think, and use cheap quality parts on trailers that run in nothing but salt. I also converted the cheap rusted electric drum brakes over to SS hyd. disc brakes on this trailer, well worth it! etrailer has all the parts and was great to work with!
by: Michael 07/20/2021
So it's been a year now, and I love it! With saltwater boating, there's already enough things to worry about breaking, so it's nice to have the peace-of-mind of knowing that I don't have to worry about my corroding brake parts. Sure, it's expensive, but after replacing a few rotors, the break-even point is quickly realized. After one year, they still work well and look great.
by: Wm05/25/2023
good quality and good service
by: Paul 08/22/2022
Very nice hub that doesn’t rust. Would recommend using the SS buddy bearing cap. And spend the extra on the all rubber seal.
by: D. Mac06/01/2022
Think it could have been shipped earlier, was in stock day I ordered, took over a week before it left the building. Other than the wait, product exactly what I asked and paid for.
D. M.
10/2/2022
Hubs holding up just great, stainless holding up great to the saltwater immersions. Wish I could find some 316 SST Lugs Nuts but understand they aren't stressed for these applications. But keeps me aware of TLC needed to prevent breakdowns.
by: Dennis03/06/2022
The product itself is great. However, for over $xxxx bolts should have been provided for the brackets, and the hubs should have been complete and loaded with grease. One of your competitors sells the package 100% complete. When checking out it tells you what else you might need. Maybe I should have read things more closely but I just figured with everything I was buying why would anyone NOT want the bolts for the bracket or a loaded hub even if it cost more. It cost me 3/4 of a day and $xxx. to run around trying to find the little pieces so I could do the job. I still haven't finished yet. I had the one weekend window to do it in.
by: Yacine06/03/2022
Definitely the best product on the market and great service from etrailer team
by: Johnnie04/21/2020
Fast service and great products. Easy i nstall.
by: Ron04/16/2018
Have not installed any of my new parts as of yet! Very great service from Stacey! Thanks
Ron
4/16/2019
I need more stuff !!!
Rachael H.
4/24/2019
Let us know what stuff we can help you find.
by: Victor04/19/2018
Awesome product at a fair price, thanks etrailer.com !
by: Steven04/03/2019
Excellent service, these are very nice hubs.
by: Bill 06/05/2021
My hubs came well packaged.
The machine work on the hubs was really clean and done well in my opinion.....They look great!
by: David 07/18/2022
great price and shipped super fast
by: Thomas05/01/2020
Great products. Fast shipping.
by: Fred 12/18/2023
by: Doug 08/27/2021
Great parts and service
by: Arlin05/01/2024
by: Alicia12/15/2023
by: Craig 10/01/2022
25
27
Show More Reviews
See what our Experts say about this Kodiak Trailer Hubs and Drums
- Replacement Idler Hubs For ShoreLand'r Boat Trailer YAV46TABLWThe spindle sleeve on your ShoreLand'r boat trailer is essentially the same sleeve you are getting in the Spindle Grease Seal Set # BB60002. You are able to remove the grease seal that comes with the CE Smith Trailer Hub Assembly # CE13511 and replace it with this new seal set. This seal set is also designed to work with the Bearing Buddy Protectors # BB1980A-SS like you would have gotten on the trailer. We do have the Stainless Steel Hub # KH84545S you can add the Inner Bearing # L68149,...
view full answer... - Boat Master Axle Hub Replacement for Saltwater Use 3,500 lb AxleIt's not pre-greased but we have a stainless steel hub part # KH84545S that fits your spindle and would work great in salt water. You would need to supply the bearings with part # L68149 and # L44649 as well as with the seal # 58846.
view full answer... - Parts Needed To Replace Disc Brake Assemblies On Yamaha Boat Trailer By MFI With 3,700LB Marine AxleBased on the measurements you took it sounds like you nailed exactly what you are looking for. The Kodiak Disc Brake Kit # K2HR35DKG is great for occasional use on salt water or fresh water. Unless you use your trailer frequently in water than I recommend the Stainless Kit # K2R35S. The Kodiak Disc Brake Kit # K2HR35DKG will need 2 Inner Bearings # L68149, 2 Outer Bearings # L44649 and 2 Grease Seals # 168255TB. While the Stainless Kit # K2R35S will need 2 Stainless Hubs # KH84545S along...
view full answer... - Replacement Hydraulic Disc Brakes for 2015 EX Loader Boat TrailerFor your 2105 EZ Loader TA102B boat trailer I am going to recommend upgrading to stainless steel parts to help ensure less corrosion and a longer life. First is the Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel # KH84545S. These will require Bearings # L68149 and # L44649. Be sure to order a hub and bearing set for each wheel. To keep your oil bath style hub the Kodiak XL ProLube Kit # XLPROLUBE1980KIT will include new seals and the cap for the hub to convert to...
view full answer... - How To Find Correct Idler Hub For 2004 EZ loader Boat Trailer With 2,999LB Axle CapacityThere are 2 ways to figure out exactly what you need Chris as I cannot look up parts for your 2004 EZ Loader boat trailer based on just a model. If you have the VIN you or I can contact EZ Loader to verify the correct bearings and seals used on your current hubs or you can pull a hub off and get the part numbers off the parts. If the part numbers are not visible you could also measure the spindle using a Caliper # PTW80157. Based on the axle weight you most likely have the #84 spindle...
view full answer... - How Much Does the Kodiak Trailer Hub for 3500-lbs Axles WeighThe Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel # KH84545S weighs roughly 8-lbs.
view full answer... - Replacement Disc Brake Kit and Hubs For 2004 DHM 2 Axle Boat TrailerBased on the corrosion I see on the parts I recommend the Stainless Steel Kodiak Disc Brake Kit # K2R35S for your trailer. This will use a 10" rotor and all the components are going to be stainless steel for corrosion resistance on one axle. You will need to pair this kit with 2 Hubs # KH84545S for each axle. Each hub will need an Inner Bearing # L68149, and Outer Bearing # L44649. You will need to measure the spindle to determine the correct grease seal. Seal # 58846 (inner diameter 1.719),...
view full answer...
- Recommendations To Ensure Water Does Not Get Into Hubs & Rust Bearings On Boat Trailer Is Salt WaterThe best way to prevent rust and corrosion inside your hubs is by selecting a stainless steel hub like the Kodiak # KH84545S, and more frequently inspecting your bearings and seals. Be sure your hubs are filled with a marine grade Grease # L54FR. You can also use Bearing Buddy Bearing Protectors # BB1980A-SS if you do not have an easy lube spindle. The bearing buddy will allow you to ensure your hub is filled completely with grease leaving no room for water to get in. If you can provide...
view full answer... - How To Find Replacement Hub For 19-Year Old TrailerSince trailer manufacturers used many different components, we have no idea what was used on a trailer. The best way to find the right components is to pull the bearings and get the numbers off the bearings that may be stamped or etched. If you cannot find the numbers you will need a digital caliper like part # PTW80157 and measure the spindle where the bearings ride. Then measure the inside of the hub. I have attached a photo that shows where you can typically find the numbers on bearings...
view full answer...
- Bearing Kit For Kodiak Trailer Hub KH84545SWe do have the right bearing kit for your Kodiak Trailer Hub for 3,500 lb Axles # KH84545S, and though they are steel, they aren't stainless steel. The correct bearing kit for your hub is the following: - Hub Bearing Kit # BK2-100 Along with the # BK2-100, if you need a bearing packer and grease, go with the Bearing Packer # PTW1218 and LubriMatic LMX Grease # L11390.
view full answer... - Stainless Steel Disc Brakes for 3,500 Lb. Axles with a 5 on 4-1/2" Bolt PatternFor a completely stainless steel version of the Kodiak Disc Brake Kit part # K2HR35D you will want to use the Kodiak Disc Brake Kit part # K2R35S. You will also need an idler hub like the Kodiak Trailer Hub part # KH84545S as the stainless steel version of this kit is only offered with the rotor and not the hub/rotor assembly. If you want the hub/rotor disc brake kit in stainless steel then the only option I have for you is the Kodiak Disc Brake Kit part # K2HR35DS which is a combination...
view full answer... - Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat TrailerThank you for providing all the information. If you are going to replace your entire idler hub you would want the Stainless # KH84545S or Galvanized # DE36VR idlers hubs since its on a boat trailer. These will come with the Inner Race # L68111 and Outer Race # L44610 already in the hub. It will then use the Inner # L68149 and Outer # L44649 bearings along with the Seal Set # BB60002 to work with your Bearing Buddy Protectors # BB1980A-SS. If you are going to reuse your hubs you would...
view full answer... - Replacement Idler Hubs For 2011 TDX Pro Team Tracker Trailer With TDE 46210 Stamped on HubsThe TDE 46210 is going to be same as a typical 3,500lb hub with 5 on 4-1/2" bolt pattern. We have a few options for this depending on what you are looking for and if your axle has the easy grease fitting on the end of the spindle. Standard Painted # AKIHUB-545-35-K Easy Grease Painted # AKIHUB-545-35-EZ-K Standard Galvanized # AKIHUB-545-35-G-K Easy Grease Galvanized # AKIHUB-545-35-G-EZ-K Stainless Steel # KH84545S If you choose the stainless steel you will need an Inner Bearing # L68149,...
view full answer... - Replacement Idler Hubs For Jet Ski Trailer With 3,500LB Axle For Corrosion ResistanceIt appears your jetskit trailer has a 3,500lb axle under it with a #84 spindle. This is a tapered spindle that uses the Outer Bearing # L44649. I believe you measured the grease seal area and not inner bearing to come up with the 1.75" measurement. We will only have hubs that use the 5 on 4-1/2" or larger bolt pattern. You could change your wheels and tires to fit the more common hub sizes. If you can let me know your tire size I can help you find a suitable replacement wheel and tire....
view full answer... - Replacement Hubs For EZ Loader Adjustable Boat Trailer For Converting To Grease Filled HubsThe Trailer Idler Hub Assembly # AKIHUB-545-35-G-K can be used as a replacement hub for your 2013 EZ Loader Trailer as long as you replace the grease seal that comes with the hub for the Grease Seal # 168255TB. If you use your trailer in salt water or live in an area that gets a lot of corrosion I recommend going to the Stainless Steel Kodiak Trailer Hub # KH84545S. As this hub only comes with races installed you will need Inner Bearing # L68149, Outer Bearing # L44649 and the Grease...
view full answer... - Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler HubsWe do have the etrailer Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K and Trailer Idler Hub Assembly # AKIHUB-545-35-G-K available in a galvanized finish. Currently the Dexter 8-248 Idler Hub # 84545BX we only carry in the black finish. We also have the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 that is also galvanized or the Kodiak Trailer Hub # KH84545S made from stainless steel. The stainless will give you the best corrosion resistance of all the hubs. You...
view full answer... - Bearing and Seal Recommendation for Installing Kodiak Hub KH84545S on MFI/Yamaha TrailerThe races of the part # KH84545S are installed but the bearings and seal are sold separately. It calls for a # L68149 and # L44649 and then for a seal part # RG06-050 which all match what you say you need.
view full answer... - Surge Drum Brake To Surge Disc Brake Conversion On a 1995 Caulkins Tandem 3,500LB Axle Boat TrailerYes, the Titan Premier Disc Brake Kit # T2HRCM10DAC will work as a starting point to upgrade your existing drum brakes to Disc on your 1995 Caulkins Boat Trailer. This Kit is Dacromet-plated to help resist corrosion and includes the hub/rotors, calipers, mounting brackets and hardware for the mounting brackets. You will need the Bearings # L44649 and # L68149, and Grease Seal # 58846 to complete the axle portion for this kit. I recommend using the Kodiak Disc Brake Kit # K2R35S as it...
view full answer... - Parts Needed to Convert Boat Trailer w/ 10 Inch Electric Drum Brakes To Hydraulic Disc With Oil HubsFirst you will want to verify exactly what size axle you have but it is most likely a 3,500LB axle. I recommend using a Digital Caliper # PTW80157 to verify the grease seal and bearing landing sizes on your spindle. A typical 3,500lb axle will use a Grease Seal # 58846 (1.719" ID), Inner Bearing # L68149 (1.378" ID) and Outer Bearing # L44649 (1.063" ID). If this is what you have here is a list of all the parts you will need for the hubs, otherwise please let me know your spindle dimensions...
view full answer... - Parts Needed To Convert 1998 Nitro Boat Trailer from Hydraulic Drum Brakes To Hydraulic Disc BrakesFor your 1998 Nitro Boat trailer I recommend using the Kodiak Disc Brake Kit # K2R35S. This kit contains stainless steel rotors, calipers, mounting brackets and bolts. When paired with the Kodiak Trailer Hub # KH84545S that is also stainless steel you will not have to deal with the corrosion you are likely having to deal with. For the hub you will need the Inner Bearing # L68149, Outer Bearing # L44649 and Grease Seal # 168255TB. This grease seal has the same inner diameter of 1.68" as...
view full answer... - Will Dexter Actuator 099-175-20 work With Hubs KH84545S and Disc Brake Kit K2R35S Yes, everything you mentioned would work great together. The actuator part # 099-175-20 is for disc brakes and has more than enough capacity so it would work great with the disc brake kit part # K2R35S which would fit the idler hubs # KH84545S you also mentioned.
view full answer... - Parts Needed to Install All Stainless EOH Disc Brake Components on Trailer with 3,500 Axles For the idler hub axle the easiest way to add stainless disc brakes would be a slip on kit like part # K2R35S which has rotors that would slip right over the current hubs and comes with everything else needed to install. To convert the hubs too of this axle to stainless you'd also need the part # KH84545S. Using the hub # KH84545S with the slip on disc kit part # K2R35S with it would be your best option for your current brake axle too since it's the only way to get everything stainless....
view full answer... - Replacement EZ-Lube Grease Cap for Kodiak KH84545SThe correct EZ-Lube grease cap for the Kodiak # KH84545S would be the TruRyde 2 inch # DC200L-DCRP. This is made of 22 gauge, zinc coated steel giving it good corrosion resistance.
view full answer... - Replacement Disc Brakes for 3,500 lb TDE AxlesAccording to Dexter your TDE axles use the standard 3,500 lb bearing combination. For a completely stainless steel disc brake system you will need the Kodiak Disc Brake Kit # K2R35S. You will also need the Kodiak Trailer Hub for 3,500-lb Axles # KH84545S. We don't have a hub/rotor assembly that is completely stainless. If you would rather have a hub/rotor then we have the # K2HR35DS which is a combination of Dacromet and stainless.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rick K.
10/23/2018
Ive had these hubs for a year now and they are working great. On multiple occasions,Ive launched in salt water without a wash facility and left the trailer for 24+ hours without any noticeable rust or corrosion. If you launch in salt, i would highly recommend these hubs and breaks.