Recommended Disc Brakes And Hubs For a 3,500LB Trailer Axle Used on Boat Trailer Used in Salt Water
Question:
Replacing tie down brand 46304 disc brake assembly w/dexter hubs + brake lines, fittings 3500lb. Saltwater application. Which disc brake assembly do you recommend, brake line kit? Backdraft trailer. Not married to vortex hubs. Corrosion an issue
asked by: Wade B
Helpful Expert Reply:
I recommend upgrading to a fully stainless steel hub and brake set. First you will need the Kodiak Trailer Hub # KH84545S. This will need Bearings # L68149 & # L44649 and a Grease Seal # 58846 for each of your hubs. You will then be able to add the DeeMaxx Disc Brake Kit # DE72FR which has stainless steel rotors, calipers, mounting brackets and even the brake pads have stainless steel backing plates.
If you can provide me with some dimensions on your trailer I can better help you find the best brake lines for your trailer.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 14 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coat/Stainless - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Search Results: bearing buddy
- Q&A: How is a 5 on 4-1/2 Trailer Wheel Bolt Pattern Measured
- Shop: Replacement Rubber Bushing for DeeMaxx Guide Bolt Sleeve - 3,500 lbs to 8,000 lbs
- Shop: Replacement Guide Bolt and Sleeve Assembly for DeeMaxx 3,500-lb to 8,000-lb Disc Brakes
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: What Rotors Fit With the DeeMaxx Trailer Idler Hub # DE36VR?
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating and Stainless Steel - 3.5K
- Shop: BOLT brand vehicle and hitch locks
- Q&A: Lug Nut Torque Rating for a 5-Lug Trailer Wheel
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Search Results: hitch pin
- Search Results: sure lube hub
- Q&A: How to Determine Correct Replacement Trailer Hub and Spindle
- Q&A: Replacement Idler Hubs For 2011 TDX Pro Team Tracker Trailer With TDE 46210 Stamped on Hubs
- Q&A: How To Find Correct Hubs for 3,700 Lb Axis Products Trailer Axle
- Search Results: hubs
- Search Results: stainless steel hub
- Search Results: hub
- Video: DeeMaxx Stainless Steel Drive-In Grease Cap Review
- Video: Review of CE Smith - Trailer Fenders - CE26238
- Search Results: surge brake parts