Bearing and Seal Recommendation for Installing Kodiak Hub KH84545S on MFI/Yamaha Trailer
Question:
I have an MFI/Yamaha trailer that has 5 on 41/2 hubs. The specs are as follows: Inner bearing: 68149 Outer bearing: 44649 Rear Seal: 168255TB Inner Race: L68110 Outer Race: L44610 This item ships with an inner race installed? that is a 68111 but I need an inner race 68110. Can this item ship with a 68110? Also, the grease seal I need is a 2.561inch OD x 1.687inch ID. Will this fit on this hub? Thank you,
asked by: Rob
Expert Reply:
The races of the part # KH84545S are installed but the bearings and seal are sold separately.
It calls for a # L68149 and # L44649 and then for a seal part # RG06-050 which all match what you say you need.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Search Results: cotter pin
- Search Results: axle nut
- Search Results: spindle washer
- Search Results: spindle nut
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Q&A: Is an Oil Bath System Compatible with EZ Lube Spindle # TRU74FR
- Q&A: Replacement EZ-Lube Grease Cap for Kodiak KH84545S
- Q&A: Stainless Steel Disc Brakes for 3,500 Lb. Axles with a 5 on 4-1/2" Bolt Pattern
- Search Results: surge brake
- Search Results: surge brake actuator
- Search Results: hydraulic brake actuator
- Video: Kodiak Trailer Hubs and Drums - Hub - KH84545S Review
- Q&A: Parts Needed to Install All Stainless EOH Disc Brake Components on Trailer with 3,500 Axles
- Q&A: Replacement Dexter Idler Trailer Hub With 8-248 and T20 Stamped on Back Of Hub
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased Trailer Idler Hub Assembly - 84545UC1-EZ
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23002 Review
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Video: Trailer Axle Long U-Bolt Mounting Kit Review
- Article: Most Popular Wheel Bearings
- Q&A: Grease Seal Recommendation to Replace TCM 21334
- Q&A: Which Rotors Do I Need For My Kodiak 225 SS Calipers
- Video: Titan Brake Actuator TK71-759-00 Review