Will Kodiak Trailer Hub for 3,500-lb Axles Fit Dexter 80043A Spindle On Boat Trailer
Question:
will the Kodiak KH8454SS replacement Hub work on my existing Dexter 80043A spindle . IM switching all over to Stainless on my boat trailer . I have existing kodiak 10inch hubs/rotor combo 5 on 4.5. the measurements are correct but i want to be sure as its very very expensive
asked by: Clarence G
Expert Reply:
From what I have found, the Dexter 80043A spindle on your trailer matches your standard 3,500 lb axle bearings and grease seal. It uses a # L68149 inner and # L44649 outer bearing with a # 58846 grease seal. This is also true for the Kodiak Trailer Hub for 3,500-lb Axles # KH84545S which means they will fit and work for your stainless steel upgrade on your boat trailer. These are compatible with rotors like the # KR10S.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Kodiak 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- Rotors
- Kodiak
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: What Brake Pads Does Kodiak Disc Brake Kit # K2R35S Come With
- Q&A: Parts Needed to Swap a Trailer With Surge Brakes to Electric Brakes
- Q&A: Do Kodiak Disc Brake Kits Change Location of Wheel on Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Is There a Brake System For a 3,500LB Axle Which Will Allow For 10 Wheels?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Determining Which Kodiak Slip On Disc Brakes Fit 2021 Load Rite Trailer W/ 3700lb Axles
- Q&A: Stainless Steel Kodiak Disc Brakes for 3,500 Pound # 84 Spindle
- Q&A: Leaf Spring for 5,000 lb Trailer Axle
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)