Stainless Steel Disc Brakes for 3,500 Lb. Axles with a 5 on 4-1/2" Bolt Pattern
Question:
is there a stainless steel version for # K2HR35D
asked by: Jabazz S
Expert Reply:
For a completely stainless steel version of the Kodiak Disc Brake Kit part # K2HR35D you will want to use the Kodiak Disc Brake Kit part # K2R35S. You will also need an idler hub like the Kodiak Trailer Hub part # KH84545S as the stainless steel version of this kit is only offered with the rotor and not the hub/rotor assembly.
If you want the hub/rotor disc brake kit in stainless steel then the only option I have for you is the Kodiak Disc Brake Kit part # K2HR35DS which is a combination of both dacromet and stainless steel. The hub/rotors included in this kit have a dacromet coating whereas the calipers and mounting brackets are stainless steel.
Both of the above options use an L68149 inner bearing and a L44649 outer bearing. If you have a different size bearing please let me know and I would be glad to offer a disc brake kit that will work for you.
Products Referenced in This Question
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Search Results: cotter pin
- Search Results: axle nut
- Search Results: spindle washer
- Search Results: spindle nut
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Q&A: Bearing and Seal Recommendation for Installing Kodiak Hub KH84545S on MFI/Yamaha Trailer
- Q&A: Is an Oil Bath System Compatible with EZ Lube Spindle # TRU74FR
- Q&A: Replacement EZ-Lube Grease Cap for Kodiak KH84545S
- Search Results: surge brake actuator
- Search Results: hydraulic brake actuator
- Search Results: surge brake
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Video: Review of Kodiak Trailer Brakes - Disc Brake Kit - K2HR35DKG
- Q&A: Difference Between Kodiak Hub/Rotor Kit and Just Rotor Kit
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Recommended Brake Line Kit for Single Axle Boat Trailer
- Q&A: What Spindle Dimensions Does the Kodiak Disc Brake Kit k2hr35d Fit
- Q&A: Replacement Surge Brake Parts for 2004 5 Starr Boat Trailer
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-210 Review