Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs
(167 reviews)
Price: $96.69
In Stock
Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs
Item # DL22457
Our Price: $96.69
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (167)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22457
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 0 - 1000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 10 Inch Lift
- With Wheel
- Steel
- Dutton-Lainson
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.
Features:
- Easy to install- bolt on mounting
- Tongue jack can be mounted in a variety of ways on various sized trailer tongues
- Smooth operating
- Enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw
- Resists rust and corrosion, even in areas with salt
- Premium TUFFPLATE zinc finish has a 500-hour salt spray rating
- All mounting hardware is included
- 2-1/2" Diameter mounting hole in swivel bracket fits most other brands of mounting hardware
- Floating miter gears allow for proper clearance and easier operation
- Maximum maneuverability from the offset swivel caster assembly
- Ergonomic hand grip with textured surface
- Made from heavy-gauge steel for strength and durability
- Silver finish
- Made in the USA
Specs:
- Application: square trailer tongues up to 3" x 5"
- Bracket height:
- 24" Retracted
- 33" Extended
- Lift: 10"
- Clearance: 10-1/2" from mounting bracket to top of jack
- Inner tube diameter: 1-3/4"
- Outer tube diameter: 2"
- Pull pin diameter: 1/2"
- Wheel diameter: 6"
- Lift capacity: 1,000 lbs
- 3-Year limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
22457 Dutton-Lainson - Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. by Dutton-Lainson
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs - DL22457
Average Customer Rating: 4.7 out of 5 stars (167 Customer Reviews)
This Dutton-Lainson sidewind swivel jack is a back saver when it comes to hitching and unhitching trailers. Silver finish.by: Greg 02/13/2024
An outstanding piece of quality equipment. The wheel swivels smoothly under all conditions. 10x better than the cheaper alternatives.
by: Dan05/21/2021
Perfect size. Moved the trailer yesterday using the trailer jack, so much easier.
by: Scott 08/29/2023
Sturdy and well-made, easy to bolt on, made in the USA.
by: Tammy 11/25/2023
awesome service, speedy delivery!!
Thank you!
by: Jim 05/03/2023
Great product. Stronger and better made than the jack that came with my Mew trailer.
by: Peter03/25/2022
This was the specified swivel jack for my Aluma MC10 motorcycle trailer. It was spec'd by the manufacturer, by etrailer, I ordered it, it arrived and...no way it's going to fit my trailer! The jack is much longer than the tongue/hitch. So, after everyone's recommendations I have to send it back and I'm out $18 or so in freight. You decide how many stars. The service was expedient but why is it costing me $$$ for their errors?
by: Charles 07/15/2023
Fit is good on my trailer. Wish the install diagram was a little clearer
by: Joseph10/17/2022
Easy to install and the trailer is easier to move not having to hold the tongue and try slide a block under it when I set the tongue down.
by: Charlie W07/12/2020
If you want the best trailer jack, reach for this! Made right here in the USA! Customer for life.
by: Shawn E01/08/2021
This is the same jack that came on my boat trailer and lasted for years. I bought it again for that reason.
by: Cary12/01/2021
Quality construction. Bolt attachments to frame do not align with DL's spare tire carrier.
by: Jonathan08/07/2022
It's freeezing up after using it for a year now.
Jenny N.
8/13/2022
The manufacturer would like to reach out to you. The jack does have a three year warranty.
by: Frank05/27/2014
Perfect replacement for similar broken unit.
by: Brooks08/14/2019
Great product. Easy install.
Brooks C.
8/15/2020
Its great.
by: Rod12/13/2013
Can't ask for much more at this price point. Easy to install, works as you would expect. I bought two, both are perfect.
by: Lawrence01/03/2016
Excellent in every way. Great price and fast shipping.
by: Philippe 04/16/2024
by: David 05/19/2023
by: 10/01/2021
by: Paul 08/20/2020
by: Samir08/20/2021
by: Greg 11/09/2020
by: Charles 03/27/2021
by: Michael 03/30/2024
This double wheel jack was the only one i could find that would replace the jack on my Ranger Bass Boat, The Ranger has a welded swivel mount and with somecareful thought it is a relacement for that jack using thr welded portion of the original.
by: Joseph10/15/2023
FYI: Received the jack and mounted it using the existing hardware. When I went to lock the jack I discovered that the locking pin on the 1500 dual wheel jack is 1/2 inch and the pin from the old 1000 winch is much smaller. Now I have to disassemble and make the holes bigger to accept the pin. It would have been helpful if that was pointed out. Hoping the holes line up.
Joseph Bara
25
167
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Replacement Dutton Lainson Trailer Tongue Jack 203295C The current version of the Dutton Lainson Trailer jack you have now is the part # DL22457 which is a side mount side crank bolt on trailer jack with a 1,000 lb capacity.
view full answer... - Side Mount Trailer Jack Recommendation for a 4,000 lb Boat TrailerActually the part # DL22457 that you referenced should work just fine for you. This jack has a lifting capacity of 1,000 lbs which would be more than enough for a setup that has a 4,000 lb boat. Most likely your tongue weight would be around 500 or 600 lbs so this jack would work just fine. I attached an install video for you to check out as well.
view full answer... - Trailer Jack Recommendation for Ramlin Boat Trailer with 4x3 inch Trailer FrameThe Dutton-Lainson Trailer Jack # DL22457 can fit trailer frames that are up to 3 inches by 5 inches so it would work great on your 3 inch by 4 inch trailer frame. This is a USA made trailer jack that would work well for you that has a capacity of 1,000 lbs.
view full answer... - Recommended Swivel Jack For Small 4 ft x 7 ft Utility TrailerI recommend a swivel jack like part # DL22457. This has a 1,000 lb capacity and will fit trailer tongues up to 3 inch x 5 inches. This is a sidewind jack and it also has a 6 inch wheel included. This jack should have no problem with the weight of the trailer with a riding mower.
view full answer... - Replacement Jack Solution for Aluma MC 10 TrailerThe Dutton Lainson trailer jack part # DL22457 that you referenced is exactly what you are looking for as a jack replacement.
view full answer... - Replacement for Old Dutton-Lainson 800 Pound Tongue JackI spoke with my contact over at Dutton-Lainson and found out that they stopped making that jack in 1994 and the specific handle for it they ran out of at least 10 years ago. But the good news is that your jack was replaced by a different jack that is still available today. It is the 6400 model # DL22457. Replacing the jack is pretty much the only option at this point. I have included a link below to a video on this jack for you.
view full answer...
- Replacement Jack with Large Diameter WheelWhen choosing a trailer jack, you will want to choose a jack whose capacity meets or exceeds the fully loaded and ready to tow tongue weight of the trailer. All of the Dutton-Lainson trailer jacks use the same 6 inch wheel, so if the size of the wheel on the jack you currently have is unsatisfactory, you might want to look in a different direction, to a different manufacturer. Fulton makes a few jacks that feature a higher capacity and a larger-diameter wheel. The Bolt-Through Swivel...
view full answer... - Will the Dutton-Lainson Trailer Jack # DL22457 fit a 3 inch by 4 inch Trailer FrameYes, the Dutton-Lainson Trailer Jack # DL22457 that you referenced can fit trailer frames that are up to 3 inches by 5 inches so it would work great on your 3 inch by 4 inch trailer frame. I attached a review video for this jack for you to check out as well.
view full answer... - Trailer Jacks Manufactured in the USAThere are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options: Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs. # DL22800 Pull Pin, Easy Swivel Trailer Jack with 6" Wheel - Sidewind - 1,000 lbs. # DL22560 A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 Pull...
view full answer... - Jack Options for 2 x 2 Trailer Frame on Kwik Kamper Pop Up Camper with Storage Box on FrontThanks for sending in the pictures of your trailer. The Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack, # DL22457, that you mentioned will fit a 2 inch by 2 inch frame but I think that I may have a better option for your trailer. Take a look at the Xtreme Off-Road Ratcheting Trailer Jack # ORJW1SU. This jack has a large wheel and a ratcheting handle which make is easy to maneuver. The jack is also easily removable, so you could store it in your toolbox, you would just have to move...
view full answer...
- Replacement Dutton-Lainson Trailer Jack 22457 or 22560I spoke to my contact at Dutton-Lainson and was able to confirm that the Pull Pin, Easy Swivel Trailer Jack with 6" Wheel part # DL22457 for 10" lift or part # DL22560 for 12" lift is a direct replacement for the jack you have on your trailer now. For future reference, the part number of the jack is a set of three digits on the black plastic handle. If you add "22" to these digits that will give you the full part number of the jack. The jack you have now should have either "457" if you...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Cole B
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Mike S
Updated by:
Ryan F
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
4/2/2022
I will have our Customer Service team reach out to you.