Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep dirt and grime out of your trailer's 7-way connector when it's not in use by covering it with this durable rubber cap. Built-in tether ensures that cover hangs from plug when popped off so that you won't lose it.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, were looking at Part Number FA82-00-3315. As you can see this is a cover with a tether is made for your seven-way trailer connector and its manufactured by Fastway. This is a good way to keep dirt, and grime, and bugs out of your trailer and seven-way when its not in use. So, Ill show you how it works.We have a plug here, slide the tether over the plug. The tether will keep it from getting lost and just push the cover on. There you go, thatll keep it clean.
This is made of injection-molded rubber and its weather-resistant and it is manufactured in the United States. And there you have it, for Part Number FA82-00-3315, the Fastway Seven-Way Trailer Connector Cover with a Tether.
Average Customer Rating: 4.7 out of 5 stars (177 Customer Reviews)
Keep dirt and grime out of your trailer's 7-way connector when it's not in use by covering it with this durable rubber cap. Built-in tether ensures that cover hangs from plug when popped off so that you won't lose it.Easy plug and play with plenty of wire to get down to the 7 way. I was able to attach to a factory ground like one of the videos showed. It's been installed for one year with no issues.
A good cover for the 7-blade connector on the 5th wheel trailer, to keep moisture from oxidizing the contacts, since it is still exposed to dampness when the cable is stored in the pin box.
This is my second tethered cover. The original, identical one I purchased from etrailer had the tether ring break upon installation. It was a little disappointing but it still functioned and I had intended to keep it. However, the folks at etrailer sent a follow up email after my delivery and inquired about my order experience. I replied that the tether ring broke at install but I was going to just go with it as is. I am happy to report that etrailer sent me a new cover immediately after my reply. I am pleased with their customer focus and because of that I will be a return customer!
Great products fantastic service.
As always etrailer delivered on time. Thank you...
This product provides a good seal on the business end of the plug. The keeper, however, is fairly flimsy and will occasionally snap as you are stretching it over the plug head.
After reading a review online where the writer claimed the loop broke when he went to stretch it over the plug I was apprehensive about what I was ordering. After watching a video of a woman effortlessly attaching the cover to a plug I was less apprehensive. After watching the video I really wasn't surprised at how easily the cover installed. I had no problem stretching the loop on and over the cover stop of the plug. No more do I have to wrap the end in electrical tape to keep moisture out.
Weather slowed down delivery. They were able to re-route my order and get it to me. They offered to resend the order when I contacted them, but I was able to wait. Great help from customer service.
Great help in keeping connectors clean
Looks well made and easy to install.
Perfect item! Fast shipping,Thanks!
Great fit and teather
I bought this to keep water out of my trailer plug. When I went to hitch up the trailer a few days after a rain, I found the plug full of water. I tossed this cap and continued my previous practice of making sure the plug was oriented down when not in use. No further problems with rain water. Very disappointing since everything else I’ve purchased from E Trailer over the years has been exactly as advertised and has preformed well.
The Connector cover fits perfectly and it arrived very quickly. Thank You!
I stopped using this when I opened it and it was full of water. Now I only use dielectric grease and stuff the plug under my jack cover and all is well. It stays dry and ready to use.
Broke while installing it. Would not r ecommend.
Jeffery
2/9/2023
It broke on the first day... threw it in the trash. Its now a year later and I still wouldnt buy again or recommend.
Only reason I marked a 4 rather than 5 due to the time it took to get from Missouri to AZ. Almost two weeks that I am sure was due to USPS. They have a tracking system that does not update well also the usps tracking said it would be here a day before it actually did. Couldn’t track during route, usps screens added zero updates, Product great, etrailer great, shipping not so much.
This cover fits nice and tight no probl ems.
Installs easily. Fits perfectly on the 7 blade connector. I see no reason to be concerned about breaking the retainer ring during installation. Just be gentle and patient. Great product!!
Does J.
12/12/2018
So, I’ve been using this connector cap for a year. First time I returned to the trailer at the storage yard, there was water in it, which meant the connector was swimming in water for a month. Well, after that, when storing the trailer, I arrange the connector and wire, so that rain will not go in and stay. It’s a cover, but not water tight. I’ll keep using it, though. Better than any alternative.
This is a nice little cover. It's surprising how a simple rubber thing like this can prevent a lot of frustration and work at cleaning all the connectors in the trailer plug after it's been outside with little protection all winter. I have no idea why I never bought one of these before...
Mac
3/23/2017
I just started de-winterizing my toy hauler after a long, brutal winter. The cap is still there, fully intact, and the inside is dry.
I bought two of these, one for my Airstream and one for my utility trailer. My cord ends were always getting dirty, full of bugs and gunk. Installation was easy because they are made of supple, stretchy rubber. They fit snugly on both trailer cords, and I am sure they will keep the nasty stuff out of my cord ends. Thanks for a great product.
Randolph
9/4/2019
I have had the cord covers for a year now and they are still in perfect condition. They must be made of high quality rubber. They work great and keep the cord ends clean.
Great flush fitting cover that blends well with the existing factory side rail protective covers. Unfortunately, they only came in a package of four so I had to purchase two sets to cover the six stake body holes.
I have always been concerned about the electrical connector being exposed to the weather and I hope that this will work. Long-term use will confirm its ability to stand up to useage and weather but so far - so good.
Ed L.
4/3/2020
It hasnt deteriorated at all. I stilk have to point the connector up to keep out rain but at least the connections are protected.
Justin is very willing to help me with my order. He even returned my phone call way beyond the expected timing. Justin explained the product to me thoroughly and patiently. I enjoyed doing business with Justin and hope to continue. One more thing I did find this item slightly lower with free delivery. I would instead order from someone who can talk to me and offer suggestions. I choose to work with a trailer if I need a trailer or other products.
Works well if I use it
Homer
5/19/2023
Still working well I haven’t torn it apart yet
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
2/10/2022
I will have our customer service team reach out to you. I do have an alternate part to offer. It is part # ACP7B. It secures to the trailer and protects the seven way.