2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K
(548 reviews)
Price: $47.01
In Stock
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K
Item # SC23-C
Our Price: $47.01
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (548)
- Q & A (0)
- Videos (2)
- Photos
Brophy Trailer Hitch Ball - SC23-C
- Trailer Hitch Ball
- 2 Inch Diameter Ball
- 1 Inch Diameter Shank
- Standard Ball
- 7500 lbs GTW
- Class III
- Stainless Steel
- Brophy
- 2-1/8 Inch Shank Length
Stainless steel ball has a 1" diameter x 2-1/8" long shank with 14 threads per inch. Wrench flats ease installation. Polished stainless steel is attractive, provides superior strength, and resists rust and corrosion.
Features:
- Hitch ball provides a connection point for your trailer's coupler
- Fine threads (14 threads per inch) provide tight, strong grip
- Durable stainless steel construction is rustproof
- Polished finish provides a sleek, attractive look
- Wrench flats allow you to use a wrench to hold the ball in place during installation
- Lock washer and nut are included
Specs:
- Ball diameter: 2"
- Shank dimensions: 1" diameter x 2-1/8" long
- Weight capacity: 7,500 lbs
SC23-C Brophy 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless Steel - 7,500 lbs
Video of 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Long Shank Hitch Ball Review
Hello neighbors, it's Brad here at etrailer, and today we're taking a look at the Brophy Chrome-Plated Two Inch Hitch Ball. Our two inch ball here, looks nice and sharp, and also we have a one inch shank hole, so the diameter of the shank will fit perfectly on this Brophy hitch mount. We also have a shank length of 2-1/8 inches. Now it is chrome, so it is gonna resist that elements of towing and the rust and corrosion that can build up. Now, if you want to put a little grease over here, that's just gonna add a little bit more protection, keeping this chrome nice and shiny. And this is gonna work great with any ball mount that has a one inch diameter shank opening.
Now, I really do like the way this looks with the aluminum Brophy. Having them kind of matching, just kind of gives it that little extra nice look to it. Installation is gonna be extremely easy. We can simply remove the nut. We have a lock washer there, and we'll just put that in place.
And you can actually, you have spots here to put your wrench on top, and then when you tighten this down, you're gonna want to use a 1/2 inch torque wrench and adjust that torque to the specifications in the manufacturer's recommendations. Now, the only thing left to do is hook up to your trailer, cross up your safety chains here, plug in your wiring, and you can drop it in place and hit the road. You should have no problem pulling a boat or even a large camper, assuming that your coupler is two inch ball rated. And that was a look at the Brophy two inch hitch ball..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K - SC23-C
Average Customer Rating: 4.8 out of 5 stars (548 Customer Reviews)
Stainless steel ball has a 1" diameter x 2-1/8" long shank with 14 threads per inch. Wrench flats ease installation. Polished stainless steel is attractive, provides superior strength, and resists rust and corrosion.by: Tracy 10/26/2023
so far no issues and looks good with my aluminum tow bar on the back of my all white truck.
by: Alan 03/17/2024
Very positive experience with both Service and the product. Two thumbs up!
by: James 08/18/2023
I think this is the best ball on the market, I understand that it is a bit pricey, however it is very nice quality.
Go get yourself one !!!
by: Larry D.02/22/2017
Excellent/light-weight mount & ball. Fit is perfect on my new Jeep Cherokee with OEM receiver. Easily removed for storage in trunk; however, safe/secure to leave in place with self-locking mechanism.
by: Danny11/18/2021
Stainless steel hitch balls are the best to use in the Gulf Coast area. Salt water, and the salty air are corrosive on these items. I have been using these stainless steel hitch balls for years now. These are good for under 7500 # trailers.
by: Tom R04/02/2024
Great quality!
by: James, Roy s kid.02/04/2024
This is a very nice Ball but made in Ch ina.
by: Ian05/12/2023
Great hitch, light, strong and still looks like new after a years use.
by: Justin03/17/2019
This ball looks to be very good quality, with very nice workmanship. The load rating is 7000 pounds, which is another 1000 pounds more than my previous 2" ball
by: Mark 12/02/2022
Nice ball. Does pick up some rust from trailer's mild steel hitch, but that wipes mostly off.
by: LaVern H.10/22/2017
I like that Brophy's stainless steel hitch ball has a very smooth finish. I also like that the lock washer & nut are stainless steel. Now I don't have to contend with rust.
Lavern H.
10/28/2018
Looks like new yet. No more rust. Love it !!!
by: Michael12/01/2017
I like the alum ball mounts that got from you guys the stainless 7.5 ball ,just cant beat it, and the receiver locks keeps all of the equipment safe and sound thank you so very much
Michael
12/1/2018
its a great 2 inch ball no rust , light lube on the ball, its as good as day one, would order another for sure.
by: Richard08/18/2023
Will work great! This way I don't have to deal with the chrome being chipped off the ball!
by: Jeff M09/25/2017
What can I say - it's a stainless steel hitch ball! At least it will look better on my truck than the rusty mess my old chromed ball turned into.
Jeff M.
9/25/2018
Still looking good after many uses
by: Jim09/27/2022
This was part of an order I'll be returning once I get approval. The hitch was not a fit for my vehicle, so I'll be going for a different configuration. Since I haven't used it I've rated it neutral; still, this ball appears to be excellent quality.
by: Bill L.05/14/2017
Very nice SS version of a 2 inch ball. I really like the polished finish vs. some of the other matte SS finishes. It matches a polished aluminum ball mount nicely. This is one of the only 7,500 lb rated 2 inch ball/1 inch shaft balls I could find. The only knock is that it is made in China, not the U.S., but you can't always get what you want. Etrailer was prompt with shipping. Please note the overall shaft length is 2 1/2 inches, which provides ample length even for 1 inch thick mounts typically found on aluminum mounts. This fact was not clear from the description, although it was buried in the Q and A. I will follow up once I've had a chance to put the product in service, which will be shortly.
by: Joseph02/07/2019
The ball worked perfectly! I love it...! I needed one that had a smaller base so my trailer hitch would not get hung up on the old style large base. This ball fit perfectly! I love etrailer because they carry such a wide variety of parts...they’re my go too site for trailering stuff!!!!
by: William01/04/2021
Upgraded to an F250 with a 3 inch hitch receiver. My old receiver was 2 inch. Ordered adapter, stainless ball and 3 inch locking pin. All delivered promptly and top quality!
by: Al P07/28/2017
The products bought were exactly what I expected with regards to quality. But what I appreciated most was the short amount of time it took to receive the items - very quick turn around from placing the order to receiving all of the items. I had emailed etrailer a couple of times, once to get the tracking number and another just to acknowledge receiving it and both times customer service replied right away - so kudos to George J and the customer service team.
by: Erik11/17/2020
Perfect fit in my new hitch, not a bit of flex and appears solid. Very curious to see how many years I can get out of this stainless ball, since all the others I've ever had only last about 6-10 years before the mount rusts to hell and back.
by: Irons Mi08/20/2020
I got tired of the rusted mass of ball mount and ball sticking out the back of my brand new cat and ordered an Aluminum ball mount and this stainless ball. The new combinatino looks much better and should not rust like the old one.
Everything is as advertised and etrailer did a great job of getting it to me.
by: John03/07/2020
etrailer was excellent in product knowledge and service. Their UPS tracking system was the best and easiest to use! I have purchased several trailer hitches and parts from them with excellent service and prices.
by: Vince of the Midwest05/06/2019
My new Canyon Diesel Crew Cab Long Bed has a higher tow rating than my previous vehicle, so I needed to upgrade the hitch mount and ball to support heavier loads. I chose this because it is rated for the higher loads and made of stainless. Living in the rust belt, no one wants to look at rusty balls.
25
547
Show More Reviews
See what our Experts say about this Brophy Trailer Hitch Ball
- Troubleshooting a Hitch Ball that is not Securing When Lowering a Trailer CouplerThere could be a couple reasons this could be happening. One being the hitch ball could be over-sized but I seem to think tightening the lock nut under the wedge will eliminate the need for you to manipulate your hitch ball into the secured position. To tighten the lock nut, make sure hitch ball is removed, and then push the wedge into the coupler and tighten the lock nut as needed. You may do this a few times until you get to your specifications. You could certainly get the hitch ball...
view full answer... - Is the Brophy 2 Inch Hitch Ball Made Entirely of Stainless SteelThe 2" Hitch Ball part # SC23-C is constructed entirely of stainless steel and has a polished finished. It works with ball mounts that accept a 1" diameter shank and trailer couplers that accept a 2" diameter hitch ball. I have attached a review video of the above hitch ball for you as well.
view full answer... - What Size Hitch Ball Shank Normall Fits Ball Mounts for 1-1/4 inch HitchThe standard ball hole diameter for ball mounts that fit 1-1/4 inch hitches is 1 inch like the 2 inch hitch ball part # SC23-C.
view full answer... - Will Zinc Coated Nut Interact with Stainless Steel Brophy Hitch BallHonestly I don't have a good answer for that but it seems that as long as you won't be in saltwater you'll be fine. Galvanized steel and stainless steel normally won't become problematic together but if there's salt water you will see some corrosion develop. We haven't had any people come back and say the nut and washer created problems with the shank and ball of the # SC23-C either.
view full answer... - Does the Brophy Stainless Steel Hitch Ball SC23-C Come with Stainless Steel Nut and WasherI spoke with my contact over at Brophy about stainless steel hitch ball # SC23-C and found out that the included nut and washer are not stainless steel but do have a zinc plating. This is common for stainless steel balls. The hardware used to secure the ball isn't stainless.
view full answer... - Size Wrench Used to Install Brophy Hitch Ball # SC23-CBrophy recommends using two large crescent wrenches to install the # SC23-C. Or at least one crescent wrench on top of the ball and a 1-7/8 inch wrench on the bottom.
view full answer... - What Is Overall Shank Length Of Brophy 2-Inch Hitch Ball SC23-CI went to the warehouse and measured the Brophy 2-Inch Hitch Ball, part # SC23-C. The length of the shank from the underside of the platform that sits on the ball mount is 2-1/2 inches. The threaded portion of the shank measures 2-1/8 inch. I have attached a photo of the ball with th edimensions shown.
view full answer...
- Height of Brophy 2" Hitch BallFrom the base to the top of the 2" Hitch Ball # SC23-C measures about 3-1/2", and the overall length of the hitch ball with the shank is about 6". I have attached a diagram and a review video for you to check out.
view full answer...
- Is All of 2-5/16 Hitch Ball # 63853 Stainless SteelWhat you'd need is the part # SC23-C. This is a stainless ball, washer and nut that matches the 2 inch ball size, 1 inch shank, and capacity as it is rated for up to 7.5k.
view full answer... - Recommended 2 Inch Trailer Ball for Andersen Alumistinger Ball MountThe Curt 2 inch Trailer Ball, part # 40038 would be a good choice for you. The ball has a 1 inch diameter shank with a 12,000 lb capacity. It would work just fine with the Andersen Alumistinger Ball Mount you mentioned. Keep in mind that the towing capacity will be limited to the capacity of the lowest rated component, be it the ball, hitch, ball mount or the vehicle itself. The CR Brophy ball you mentioned would also work well, but it has a lower capacity at 7500 lbs.
view full answer... - Where is Brophy 2 Inch Stainless Steel Hitch Ball MadeBrophy hitch ball # SC23-C is made overseas. For a stainless steel option that is made in the US you would have to go to an interchangeable set, # 903B. I have linked a video review of this set for you.
view full answer... - Stainless 2 inch Hitch Ball Recommendation for a Brophy Ball Mount EA40For a 2 inch diameter stainless steel hitch ball to use with the Ball Mount part # EA40 that you referenced the Brophy ball part # SC23-C would work great. This ball has 2-1/8 inch long shank that is 1 inch in diameter so it would fit the # EA40 well.
view full answer... - Availability of 2 Inch Stainless Trailer Ball with 1 Inch Diameter ShankI'm not entirely sure what you're looking for, was it a trailer ball? If so, we have a 2 inch stainless trailer ball with a 1 inch shaft, part # SC23-C. The ball has a 7500 lb capacity. If that's not what you were needing please let me know, I'd be happy to help.
view full answer... - How to Determine Correct Trailer Hitch Ball Size Needed for Travel TrailerI can tell you how to determine which trailer hitch ball you need for your 2012 Sportsmen Classic Series M-19BH travel trailer, and it seems likely it is a 2" hitch ball, though there would be no way we could have this type of information available. To determine the correct hitch ball you need to know what size ball the trailer's coupler will accept so that's the first detail you will need to acquire. Like I mentioned, for a trailer this size it is likely a 2" ball but you will need to...
view full answer... - Best Ball Mount for 5 Inch Rise in 2 Inch Trailer Hitch ReceiverThe best ball mount that will give you 5 inches of rise is the Brophy Ball Mount # EA60. This ball mount is made from solid aluminum, which means no welded-on parts that can create weak spots, and also means it isn't going to corrode like steel can. This mount has an 8,000 lb capacity which is more than enough for the large majority of towing needs. For a hitch ball you will need either the 2" Hitch Ball # SC23-C or 2-5/16" Hitch Ball # SC30-C. Then to secure the # EA60 to your hitch,...
view full answer... - Brophy Hitch Balls Made in the USAThe Brophy 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K item # SC23-C you referenced is made in Clackamas, Oregon.
view full answer... - Recommended Two Inch Hitch Ball To Use With Fastway Aluminum Ball Mount The ball mount you referenced, part # DTLBM8200, has a hitch ball shank hole that measures 1 inch diameter and the platform measures 1 inch thick. After doing more research I found that the shank on the # SC23-C hitch ball is actually 2-1/8 inches long. The shank is considered a medium length on this hitch ball. A medium shank is considered between 2 and 3 inches. When installing a hitch ball, after the nut and washer have been installed, there should be at least one thread showing below...
view full answer... - Corrosion Resistant 2 Inch Hitch Ball and Lock for Curt Aluminum Ball Mount With 2 Inch DropThere are a couple of really good options for a 2" hitch ball and hitch lock to resist corrosion with the 8,000 lb capacity Andersen Alumistinger Ball Mount for 2" Hitch - 1" Rise, 2" Drop # AM3503. For a hitch ball you can't go wrong with stainless steel to resist corrosion so the best option is the stainless 2" Hitch Ball # SC23-C. Then for a stainless steel hitch lock I recommend the Curt Trailer Hitch Receiver Lock # C23519. I have added links to video reviews for you to check out...
view full answer... - What Trailer Hitch Balls are Recommend for the Solid Aluminum Ball Mount, # DTBM4200A ball with a medium shank, 2-1/8 inches or longer, will work fine with the Solid Aluminum Ball Mount, # DTBM4200. You will just need to make sure that there are at least 2 threads past the nut when it is properly tightened to the ball mount. Here are some of the balls we recommend: For a 1-7/8 inch diameter, # 63851 For a 2 inch diameter, # SC23-C For a 2-5/16 inch diameter, # 63853
view full answer... - Recommended 2" Stainless Ball and Anti Rattle Device for the Flash Self-Locking Aluminum Ball MountThe Brophy 2" Stainless Steel Hitch Ball part # SC23-C will work out great with the Flash Self-Locking Aluminum Ball Mount part # DTLBM8600. For an anti rattle for it use the Roadmaster Quiet Hitch for 2" Trailer Hitches part # RM-061 this is my go to anti rattle because it is very effective at keeping things secure. I've linked a video on it for you to check out.
view full answer... - Correct Torque to Install Brophy 2-Inch Hitch Ball SC23-C on Alumistinger Ball Mount AM3505To install the Brophy 2-Inch Hitch Ball # SC23-C on Fulton Ball Mount # F47CR you will use a suitable torque wrench (one like # ALL944001) to apply 250-ft-lbs of torque on the nut. I confirmed this with my contact at Brophy Machine Works.
view full answer... - Replacement 2 Inch Hitch Ball RecommendationGood news! I was able to identify the chrome ball that you had purchased and have found a great replacement for you. The chrome ball # 63845 you currently have has a shank that measures 1 inch in diameter, a shank length of 2-1/8 inches, and a capacity of 7,500lbs. I recommend the stainless steel Brophy Hitch Ball # SC23-C to replace your chrome plated ball. This ball also has a 1 inch shank diameter, 2-1/8 inches long shank and a capacity of 7,500lbs., so they will swap out just great....
view full answer... - Hitch & Ball Mount for 2002 Jeep Wrangler to Clear Spare TireYou can avoid clearance issues between your 2002 Jeep Wrangler's rear-mounted spare tire and your towing ball mount by using a ball mount long enough that will extend past the rear edge of the tire. The 2-inch hitch I suggest for your 2002 Jeep Wrangler Unlimited is Curt # 13408. This is a no-drill bolt-on installation. When we installed a Class III hitch on your vehicle we found that the distance from the hitch pin hole to the rear of the spare tire was 6-1/4-inches. Once it is installed...
view full answer...
- 2 Inch Stainless Steel Hitch Ball with 1-1/4 Inch ShankI do have options for you but we do not have exactly what you are looking for. The best option we have is the 2" Hitch Ball part # SC23-C which is made of stainless steel and has a 1" diameter shank. In order to then use this with a 1-1/4" diameter ball hole you would also need the Hitch Ball Bushing part # F-2. The Hitch Ball Bushing is zinc plated and unfortunately we don't have any that are stainless steel. We also have the Fastway Trailer Hitch Ball Cover with Tether - 2" Ball Item...
view full answer...
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Amanda M
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Bradley B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Danny M.
11/19/2022
Outstanding product.