Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Dutton-Lainson single-speed, light-duty winch is designed for multipurpose horizontal pulling operations. Ratcheting handle and 12' strap included.
Features:
Specs:
Single Speed Pulling Winch Specifications | ||||||||
---|---|---|---|---|---|---|---|---|
Model | Rated Capacity (2) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Reversible Ratchet | Max. Drum Capacity - Cable (3) | Max. Drum Capacity - Strap |
DL16003 | 400 lb. | 5/8" | 1:1 | 7" | 18 | 1/8" x 87' | 19' | |
(2) Capacity is based in direct pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum.(3) Drum capacity based on cable size listed. (Cable is not included.) |
Winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people can be present.
Average Customer Rating: 4.8 out of 5 stars (59 Customer Reviews)
This Dutton-Lainson single-speed, light-duty winch is designed for multipurpose horizontal pulling operations. Ratcheting handle and 12' strap included.I didn't need the bracket, but the rest is exactly what I needed to replace the winches on a mid-2000s Shorelandr PWC trailer. The handle is slightly different, but the rest of the mechanism matches the original.
Perfect fit. Mounted to top edge of my floating dock to winch our seadoo onto our shoreport.
Just needed a simple way of loading my 80lb portable generator to the bed of my pick up truck.
Easy to set up.
Quick shipping, exact fit, easy installation
Using with my SeaDoo gti130se and shorelandr
Trailer
Just got my DL16003 winch, and I've very satisfied. I have a 9 ft plastic bass boat that weighs out over 200 lbs with gear, on an 8 ft tilting utility trailer. My goal was to be able to retrieve the boat from a launch ramp by myself - 63 years old with a bad back.
I had my doubts this 1:1 winch would do it, with no mechanical advantage to speak of. I'm barely able to haul the boat up onto the trailer with a heavy line on the bow. That wasn't going to work in the long run, so I thought I'd give the winch a try. No doubt an 8:1 crank winch would do it, but I'd have to build a raised mount for the handle to swing 360 degrees.
I was able to mount the DL16003 on the trailer bed, it fits snugly against the boat bow when loaded. For a test, I tilted the trailer and slid the boat off the trailer in the driveway, hooked of the winch strap and hauled away on the winch lever. I was able to one-handed drag the boat up the trailer with the winch without strain, so it's a success!
Used in an unconventional manner to hang mobile saw carts in my garage. Work great!
The winch on my wave runner trailer was broken and I could not find where to buy parts. I found the DL16003 on the etrailer website. It looked similar to mine. The base bracket on my trailer is built in, but the reel, handle and lock mechinism looked very similar. I took a chance and bought the DL 16003 winch. Etrailers service and quick response was very good, via email I knew the status of my order at all times. The winch came with instructions and explode out view of the parts.
With four wrenches (two 7/16 and two 1/2) I was able to easily remove parts for the new Winch base bracket and install them on my old bracket. The new product appears to be sturdier than the OLD and I expect years of good service.
Received my hand winch exceptionally fast. The quality is excellent. I have a 400 lb. hovercraft and I needed a lightweight winch to winch it onto my trailer. Most importantly, I was not able to use a regular crank winch as the craft arrived at the front of the trailer because of the craft's nose configuration. The ratchet-type winch is the perfect solution for me.
Guess it is a good product but didn't work well for our purpose. We tried using to pull out inflatables onto a dock.
We screwed it to the dock surface. The angle was wrong and the pulling power was very very slow.
Seems it would be better for absolutely straight pulling.
Works as expected. We did not have room for a full 360 crank handle, so this is perfect. It is mounted in a snowmobile trailer to pull in a large fishing sled. Thanks for the great service e-trailer.
This is a well made little winch. The levers are strong enough to engage and disengage the winch. The little hook on the end of the strap is small enough you won't be tempted to overload the 400lb capacity. I'm using it to raise and lower a heavy truck tailgate. Works great and easy to mount.
The correct replacement for a PWC jet dock. About half its functioning life used due to rust in a salt water environment. I usuall replace every few years.
Heather A.
6/8/2021
Thank you for your review. I recommend to use the Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle part # FW16000101 because of its aluminum casing which provides corrosion resistance.
I've ordered from these guys three times and everything was great each time. UPS messes up by handing off my package to the USPS and that made it take a little longer one time but that is not these guys' fault at all. I live in a small town and UPS only comes a couple times a week.
These guys are great to work with and I will go to them with all my trailer needs!
Shopping experience was very slick. Product arrived ahead of schedule thanks to free shipping upgrade. The winch is working as anticipated. The back and forth stroke instead of circular stroke is just what I needed due to installation location. Trying to engage/disengage the two pawls to release tension is a bit cumbersome, but it does the job.
it was what I ordered and works fine for my older jet ski trailer that does not allow a handle protruding from it.
The hand Winch I ordered was excellent quality. The service was great and unfortunately it did not fit the application I wanted it for so I had to return it. The folks at etrailer was super about returning it.
Works great for PWC trailers
Alan K.
8/12/2015
Still working great
Winch is as described. Works properly for my application. Installation and operating instructions are clear and to the point. Delivery as promised.
Awesome simple unit. I am using it on a bunk load on a granite shore line on the St. Lawrence River. It is perfect for my 12 Alumacraft boat. It also keeps my boat high and dry and I can pull the plug. This also allows more boats to be parked at the bigger docks with my boat not taking up dock space.
Product arrived, installed and ready to pull and latch. I was matching the winch with one that was missing pieces. Looks like it'll work, won't use jet ski trailer until probably next year.
A great winch for small boat trailers with limited room for your installation.
Really cool winch. Small but sturdy, nice loop strap.
Great product that I’ve been using for a year now. Exactly replaced my old on Shorelander PWC trailer.
This product is perfect for the application I needed. It didn't have to winch a ton, but I had limited space and was not able to get a 360 degree type winch. The quality seems good and it does the job I need it to do.
This product is a perfect replacement for the Shelby winch on the older jet dock models for personal watercraft
Do you have a question about this Trailer Winch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dennis
5/18/2013
I took the boat out to a local lake and retrieved it no problem. Again, recommended!