12' Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson

See what our Experts say about this Dutton-Lainson Accessories and Parts

• Replacement Winch Strap for Shelby Wench 5408b with 12 Foot Strap
  It is recommended that winches with a capacity of 2,600 pounds use a strap with a rating of 150 percent of the weight of the winch. The replacement strap I recommend is the 12 foot Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson, part # DL24291, to use with your Shelby Winch 5408b. This strap will replace your winch strap and the hook has a tensile strength of 3,750 pounds well over 150 percent of the 1,900 pounds your winch is rated to hold.
  view full answer...
• Winch Recommendation for a Personal Water Craft (PWC) Lift
  There could be any number of brand winches on your personal water craft lift. The winch should have some sort of serial number and/or a manufacturer on it somewhere on in the owners literature for the lift. If you cannot find this information, I may be able to determine what winch is used based on the model and manufacturer of the lift itself. You could also use a different brand winch provided that it has the same mounting hole pattern as the existing winch. You will need to measure the...
  view full answer...
• Mounting Hole Spacing and Dimensions on Dutton-Lainson Hand Winch # DL15002
  I pulled a sample of the Dutton-Lainson Hand Winch # DL15002 from our stock and took measurements of the mounting surface. The overall dimensions and mounting hole spacing are shown on the attached photo. The overall size of the plate is 3-1/2-inches x 3-3/4-inches. The oval openings measure 7/16-inch x 13/16-inch. The round hole has a diameter of 7/16-inch (not pictured). Center-to-center hole spacings are shown in the photo. This 900-lb-rated winch features an anti-corrosion zinc finish,...
  view full answer...
  
• How to Use the Personal Water Craft Trailer Winch Strap On a Wave Runner
  The 12 foot Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson, item # DL24291, is designed to be used with a hand winch mounted on the wave runner trailer like the Dutton-Lainson Trailer Winch, item # DL15002. There should be a bow eye on the front of the wave runner that the hook from the strap connects to and then the jet ski can be winched onto the trailer. If you need straps to tie down the rear of the jet ski, I would recommend the Erickson Inboard/Outboard...
  view full answer...
• Replacement Strap for Shelby 5408B Winch
  The replacement strap I recommend is the 12 foot Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson, part # DL24291, to use with your Shelby Winch 5408b. This strap will replace your winch strap and the hook has a tensile strength of 3,750 pounds well over 150 percent of the 1,900 pounds your winch is rated to hold.
  view full answer...
  
• Mounting Holes Measurements and Strap Width for Dutton Lainson 600 and 900 Pound Winches
  Both hand winches # DL15002 and # DL14125 have the same mounting pattern. I have included a picture that shows the dimensions for you. A 2 inch wide strap will work with these winches. You will want the strap capacity to be at least 1.5 times higher than the winch capacity for safety. For winch # DL15002 the recommended strap is # DL24291. And for winch # DL14125 the recommended strap is # DL24239.
  view full answer...
  
• Replacement Winch Strap for Pontoon Boat Trailer
  The 12' Long Personal Water Craft Trailer Winch Strap with Safety Hook part # DL24291 will work out great for a replacement. The titles we put on them are for the application you typically find them used in. With yours being 2"x12' you will be in good shape though.
  view full answer...
• Replacement Strap for Shelby 5408 Winch
  The winch straps we have available are designed to secure to the drum with a bolt like what you mentioned. I have not seen a strap that loops around the drum like what you have pictured. Your best bet is to simply go with a replacement strap that includes the needed bolt so you can attach it that way. For your Shelby 5408 winch, I recommend the Dutton-Lainson 12 Foot Long Trailer Winch Strap # DL24291. This 2 inch wide, 12 foot long strap includes the needed mounting bolt and lock nut....
  view full answer...
  
• Shortest Length of Hand Winch Strap
  Unfortunately we do not manufacture here at etrailer so we cannot make you a custom winch strap. Usually winch straps and cables come no shorter than 15-feet and can be as long as 50-feet. The shortest one we offer is 12-foot Personal Water Craft Trailer Winch Strap # DL24291.
  view full answer...
• Dimensions of the Personal Water Craft Trailer Winch Strap # DL24291
  I spoke with my contact at Dutton-Lainson and he informed me that the thickness of the Personal Water Craft Trailer Winch Strap is .525 inches. For the rest of the dimensions, check out the picture I attached to see the schematic that my contact at Dutton-Lainson sent me.
  view full answer...
  
• Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
  The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs # DL24239 or the 12' Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson # DL24291. The only Fulton name brand strap we have in the 2 inch width is 20 feet # FWS20HD0200.
  view full answer...
• Strap Replacement for Fulton XLT Powered Winch
  You will need to remove 9 screws to get the cover off of your Fulton XLT Powered Winch F500620. 5 on the bottom, 2 on the clutch knob side, and 2 on the Fulton emblem. You will need to remove the winch from the trailer to be able to access the screws on the bottom for the cover removal. You can replace the strap with the # DL24291.
  view full answer...
  
• Is there a Coated Cable that Works with Dutton Lainson 900 Pound Trailer Winch
  Hand winch cable # DL24043 is not coated. We do not have any compatible cables that are coated. The best thing to use would be a winch that takes a strap and not a cable at all. Winch # DL15002 that you referenced can be used with a strap, # DL24291. The winch and strap are made in the USA. A winch can be used in conjunction with pulleys to hoist the deer feeder but you will then need to secure it with chains and detach the winch cable or strap. The winch should not be used to hold anything...
  view full answer...
• How do you use the Dutton-Lainson 6147 WaveRunner Winch Strap?
  The loop at the hook end of the Dutton-Lainson winch strap, # DL24291, is called a hand-saver loop, and is used with winch straps for safety and convenience. The loop makes it easier when pulling slack, and safer if feeding the strap to the winch drum. If the hook on the Dutton-Lainson strap is too big for your bow eye, you could use something such as the BoatBuckle PWC Winch Strap with Hook and Soft Tie # IMF14216, which has a loop that is designed to be used with the hook around your...
  view full answer...
• Can Dutton-Lainson Winch Pull Kayak on Ladder Rack
  Yes, I think it could work to pull your kayaks on top of your ladder racks by using the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 12' Strap # DL16003. Of course, I wouldn't be able to say with 100 percent certainty that this is going to be a perfect solution and you won't encounter any issues because this is not something we have tried and it's not what the winch was designed for, but people use winches for all types of different situations. But with that disclaimer,...
  view full answer...
• Can Strap of Fulton XLT Powered Winch be Replaced
  Yes, you can replace the strap of the now-discontinued Fulton XLT Powered Winch F500620; I have added a diagram from the instructions which explain how to replace the strap. The winch uses a 2" wide strap and I recommend the 12' Long Personal Water Craft Trailer Winch Strap # DL24291.
  view full answer...
  
• Replacement Strap for Fulton 500621 Electric Boat Trailer Winch
  My contact at Fulton tells me that they don't offer a replacement strap for the discontinued Fulton 500621 electric winch, but I found that the winch uses a 2 inch wide strap and fastens to the winch spool using a bolt that passes through a loop that has been sewn into the end of the strap. The 4000 lb capacity 15' x 2" Dutton-Lainson # DL24239 replacement strap would install in the same manner, so it'll work just fine for your Fulton 500621 electric winch. This is the longest strap that's...
  view full answer...

Do you have a question about this Accessories and Part?