Using a Boat Winch On Roof Rack Of 2013 Nissan Frontier to Winch 70 Lb Boat Onto Truck Bed Cover

Question

Question:

I own a 2013 Nissan Frontier truck that has a box lid cover which I transport a 70 lb aluminum boat on top of. The truck has one of the Nissan built in roof racks that looks very solid. My question is: can i install a small 2000 lb winch to the roof rack to use to pull the boat up onto the box lid? Thanks Tony

asked by: Tony P

0

Expert Reply:

I cannot say without a doubt that your roof rack could not be damaged by attaching a winch to it to pull the boat. It also may void any warranties that may be on the rack itself or vehicle since it is not designed for that use. However, most of the weight will be on the winch itself so it is ultimately up to you if you want to take that chance.

I recommend to use the Dutton-Lainson Hand Winch part # DL16003 which has plenty enough capacity for the 70 lb boat. This has a ratcheting handle that allows for clearance of the roof rack cross bar to use it. I have attached the mounting hole dimensions but you may consider using U-bolts to install around the cross bar instead of drilling into it. The base measures 3 and a 1/2 inches long by 3 and 1/4 inches wide. You should be able to get a good idea of where you can mount it on the rack with that measurement.

expert reply by: Heather A

0

Answer 1

Since you likely won't have enough clearance for a winch that uses a standard rotating handle, a winch with a ratcheting handle like the #DL16003 would be your best bet. I'd recommend using a couple of U-bolts to attach the winch to the…

view full answer...

Answer 2

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

view full answer...

Answer 3

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a confirmed fit for a 2022-2023 Nissan Frontier Pro 4X. I check with Draw-Tite for you to confirm. It's the same front hitch as the previous generation so that is where there may be…

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a fit for a 2010 Nissan Frontier and will require either removal or modifications to the center air dam trim piece or skid plate if present. I have attached a photo for you that shows…

view full answer...

Answer 5

Thanks for the picture! Yes, there are modifications required but all you will need to do to install the Draw-Tite item #65075 on your 2022 Nissan Frontier is to remove the air damn or trim about 1/4 of it away. This piece will sit behind the hitch…

view full answer...

Answer 6

The Draw-Tite front-mount hitch #65075 is a confirmed fit on your 2017 Nissan Frontier. From the tops of the frame brackets that contact the frame down to the bottom of the receiver tube the dimension is 6-inches according to my Draw-Tite contact.…

view full answer...

Answer 7

Curt front mount trailer hitch #C31033 will fit your 2013 Jeep Grand Cherokee as long as the vehicle does not have factory tow hooks. There are no options if it does have factory tow hooks. Though we have heard of at least one customer who had a…

view full answer...

Answer 8

To answer your question about which front mounted hitch option you should order for your 2016 Jeep Grand Cherokee, there is actually only one that fits, the Curt Front Mount Trailer Hitch Receiver #C31033. That said, your tow hooks do need to be…

view full answer...