Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Dutton-Lainson worm-gear winch is designed for vertical lifting applications. Load holds when cranking is stopped. No mimimum load required.
Features:
Specs:
| Worm Gear Specifications | |||||||
|---|---|---|---|---|---|---|---|
| Model | Winch Description | Rated Capacity (1) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Max. Drum Capacity - Cable (2) |
| DL10970 | Reg. Drum Handle Drive | 2,000 lb. | 1-1/2" | 40:1 | 7" | 314 | 9/32" x 49' |
(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum. (2) Drum capacity shown is based on cable size listed. (Cable not included.) | |||||||
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
Average Customer Rating: 4.7 out of 5 stars (19 Customer Reviews)
This Dutton-Lainson worm-gear winch is designed for vertical lifting applications. Load holds when cranking is stopped. No mimimum load required.To start with the winch is missing the nut for the handle. It was shipped in the original box and was beat up pretty bad. Also was promised on 13th from your sales person. No to happy at the moment.
Installation of DL winch. Worm gear necessary due to tight fit behind fairing. Also junction box done right. Not everyone carries these items. I found etrailer through an Internet search for the junction box.
Marshall
8/7/2013
HI,I LIKE THE DL10970 WINCH,BUT WANT ONE THAT I CAN USE A STRAP, DO YOU HAVE ANY ONE LIKE THIS THAT USES A STRAP ?
We used this winch to create a hoist for my roof top box in a way that I can put it on and remove it from my car by myself. It's definitely overkill for the weight of that box, but it works perfectly and the cost was reasonable.
Great product -well built - decent price. Now taking the top off my Jeep is a 1 man 10 minute job , way better than other units that I looked at that cost more. Excellent work on E-Trailers end also
I purchased this winch to use for a boom crane on my 4'x8' trailer. The original was not worm drive and would unwind dangerously sometimes while lifting a heavy load. This doesn't do that. However the unit was too wide so I had to reduce the width of the drum and frame by 1 1/2". I am stating at this time I release etrailer from any liability if the unit fails.
Thomas F. Gondolfi
Thomas
9/14/2020
The winch still works great. In fact I bought another to rig up as a powered come-along. It has been very handy.
I did some research on finding the right winch for use in our garage. While some were cheaper I was afraid of the reviews that said they were flimsy. This winch did not disappoint. It is solid, installs easily, and lifts loads as advertised.
Kudos to etrailer on the delivery ... I picked standard delivery and they upgraded my shipping. Not sure why ... but is showed up 2 days later. Thanks!
Justm arrived, I haven't used it yet, but I'm sure it will be fine. Dealing with etrailer is always a pleasure.
I used this winch to move some large machinery. It worked very well and securely managed the loads. The hand crank is easy to turn, but it takes a lot of turns to move the load a significant distance. I ended up removing the handle and driving the gear with a cordless drill to speed it up. If I were to buy this again, I would get the one designed to be used with a hand drill. The cable is a bit hard to tie on to the spool since it is not easy to flex a 1/4-inch cable to a tight radius. Eventually I got it on though, and am pleased with the result. etrailer was quick with shipment, so I'm pleased with their service.
Very well made .I have another brand not as good .Will be getting more soon.
Excellent product and delivery time was very good. I have ordered many items from E-Trailer and they have all arived in a good time and are as depicted. I have confidence in my business with them:)
I bought the winch to replace one with a hand crank and a much less forgiving gear ratio. I was able to operate this one with my cordless drill and a socket. Works great.
Very well made in the USA, heavy steel, smooth action. The only improvement I would make is an attachment on the spool for a cable.
Once winch is mounted and we have a chance to use this we will leave a review of the product.
Staff= professional and knowledgeable.
Excellent shipping.
Good product made in America.
Great service/great price
!
great winch
Great fast service
Great Transaction!
Do you have a question about this Trailer Winch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/20/2024
We can definitely have this taken care of for you. Customer Service will be in touch.