This Dutton-Lainson worm-gear winch is designed for vertical lifting applications. Load holds when cranking is stopped. Split drum lets cable pull from opposite directions. Loop drive lets you crank winch with power drill or shepard hook.
Features:
Specs:
| Worm Gear Specifications | |||||||
|---|---|---|---|---|---|---|---|
| Model | Winch Description | Rated Capacity (1) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Max. Drum Capacity - Cable (2) |
| DL10976 | Split Reel Loop Drive | 2,000 lb. | 1-1/2" | 40:1 | -- | -- | 9/32" x 49' (24-1/2' per side) |
(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum.(2) Drum capacity shown is based on cable size listed. (Cable not included.) | |||||||
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Dutton-Lainson Worm Gear Hand Winch with the split reel and a 2,000 pound rated capacity. Now, this is a worm gear winch, it's designed for horizontal pulling and vertical lifting applications. You can see, you can crank one direction, that's to lift, the other direction to lower, and the load will automatically hold when the reel stops turning. It is a split and reel design, so it allows for simultaneous operation of two lines from opposite directions for greater versatility. The loop drive right here you can see, this allows the winch to be mounted out of reach and can be operated with a long shepard hook or a variable speed electric drill to crank the winch.
It does use laminated high carbon steel gears, which are heat treated for longer life. The gear ratio on this winch is 40 to 1. It is a nice, heavy-gauge embossed steel base for extra strength, has a nice powder coat copper bronze finish to it, and the bearings, they use permanently lubricated bearings on the drive shaft, which are maintenance free. This part is made in the USA. Few specs again on this, the rated capacity is 2,000 pounds, maximum cable length that'll fit on this, if it's a 7/32 diameter cable, will be about 82 feet, 1/4 inch diameter cables, about 59 feet, and then the 9/32 diameter, it's about 49 feet or about 24 1/2 feet per side.
Does come with a nice owner's manual to describe how this operates. But that should do it for the review on this Dutton-Lainson Worm Gear Hand Winch with the split reel and a 2,000 pound rated capacity..
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
This Dutton-Lainson worm-gear winch is designed for vertical lifting applications. Load holds when cranking is stopped. Split drum lets cable pull from opposite directions. Loop drive lets you crank winch with power drill or shepard hook.Good communication, good price and fast shipping!
Product arrived in a few days and was just what I needed for my project that required a dual spool ability.
Do you have a question about this Trailer Winch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.