bing tracking image
  1. Trailer Winch
  2. Dutton-Lainson
  3. Brake Hand Winch
  4. Utility Winch
  5. Polyester Strap
  6. Heavy Duty
Dutton-Lainson Hand Winch - Worm Gear - 2,000 lbs

Dutton-Lainson Hand Winch - Worm Gear - 2,000 lbs

Item # DL11002
Our Price: $98.56
Trailer Winch
Shipping Weight: 11 lbs
Add to cart
In Stock
DL11002 - Worm Gear Winch Dutton-Lainson Brake Hand Winch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
This Dutton-Lainson worm-gear winch is designed for vertical lifting applications. Load holds when cranking is stopped. No mimimum load required. Accepts 2" wide winch strap. Great Prices for the best trailer winch from Dutton-Lainson. Dutton-Lainson Hand Winch - Worm Gear - 2,000 lbs part number DL11002 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (4)
  • Q & A (0)
  • Photos

Dutton-Lainson Trailer Winch - DL11002

  • Brake Hand Winch
  • Utility Winch
  • Polyester Strap
  • Heavy Duty
  • Worm Gear Winch
  • Dutton-Lainson
  • Standard Hand Crank

This Dutton-Lainson worm-gear winch is designed for vertical lifting applications. Load holds when cranking is stopped. No mimimum load required. Accepts 2" wide winch strap.


Features:

  • Worm-gear winch is designed for heavy-duty vertical lifting applications
  • Accepts 2" wide x 20' long winch strap (sold separately)
  • Crank 1 direction to lift, the other direction to lower
    • When reel stops turning load automatically holds
  • Laminated, high carbon steel gears are heat treated for longer life
  • Heavy-gauge embossed steel base for extra strength
  • Permanently lubricated bearings on drive shaft are maintenance free
  • Handle drive
  • Powder coated black finish
  • Made in the USA


Specs:

  • Capacity: 2,000 lbs
  • Maximum cable length:
    • 7/32" diameter: 82'
    • 1/4" diameter: 59'
    • 9/32" (special reel required): 49'
  • 5-Year limited warranty


Worm Gear Specifications
ModelWinch DescriptionRated Capacity (1)Drum Hub DiameterGear RatioHandle LengthMax. Mechanical AdvantageMax. Drum Capacity - Cable (2)
DL11002Reg. Drum Handle Drive2,000 lb.1-1/2"40:17"3149/32" x 49'

(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum. (2) Drum capacity shown is based on cable size listed. (Cable not included.)


Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.



11002 Dutton-Lainson Worm Gear Hand Winch - 2,000 lbs - Model WG2000

Installation Details DL11002 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Dutton-Lainson Hand Winch - Worm Gear - 2,000 lbs - DL11002

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

This Dutton-Lainson worm-gear winch is designed for vertical lifting applications. Load holds when cranking is stopped. No mimimum load required. Accepts 2" wide winch strap.

by:

I used this winch as a surface mount alternative to your typical winch on a post for pulling a Sea-Doo onto a hinged dock lift. The product has held up well. Due to the 40:1 gear ratio, I ended up using a battery operated drill to turn the worm gear instead of the hand crank. Works well.

Jason

4/22/2021

Still working well after 1 year.



by:

I ended up purchasing two of these Dutton's. I have a smaller Alumucraft Boat so I used these two winches to raise my boat out of the water at my dock. It was by far cheaper than a sling lift kit. Unfortunately I have very shallow water at winter pool and this worked perfect to get the boat up out of the water. Great Service, Great Product, easy to use, what else can I say.



by:

Looks like a good heavy winch.
Want to
use it to make a winch jack.



by:

I haven't installed it yet but, it looks like a good product. The gentleman I spoke with also was great.


4
4

See what our Experts say about this Dutton-Lainson Trailer Winch

  • Is a Strap Reel Available for Dutton-Lainson Model WG2000 Winch?
    I took a look at each of the parts we carry for Dutton-Lainson winches such as your # DL10970 and went on to search elsewhere and unfortunately I could not find a reference to that part anywhere, nor was I able to locate a strap that is recommended to be used with that winch. That winch is designed to be used with cables and I recommend instead of modifying that winch you instead get one designed for use with a strap such as the Dutton-Lainson # DL11002.
    view full answer...
  • Gear Ratio and Minimum Load of Dutton-Lainson # DL11002 Worm Gear Hand Winch
    The Dutton-Lainson # DL11002 winch you referenced has no minimum load requirements, and has a 40:1 gear ratio.
    view full answer...
  • Hand Winch for Use with Lightweight Loads
    In cases where the weight of the load on the winch is too low to properly engage the winch brake you can use a worm gear winch instead. This type of winch uses a screw mechanism to operate the load. The weight of the load cannot cause the winch to reverse direction so no brake mechanism is needed at all. The linked page displays our range of worm gear winches. You have a choice of poly strap or wire rope models, but for a marine environment I suggest the strap type, either part # DL11004...
    view full answer...
  • Worm Gear Hand Winch and Strap to Lift a 50 lb Rooftop Carrier Off of a 2012 Honda Accord
    The Dutton-Lainson Worm Gear Hand Winch, # DL10950, cannot be used with a nylon strap. This is a cable only application that would work well to raise and lower your 50 lb rooftop carrier if your set up allows use of a cable If your set up requires a strap, you could use the Dutton-Lainson WG2000 Worm Gear Hand Winch, # DL11002. This is the only worm gear hand winch we offer that will accept a strap and it has a rated capacity of 2,000 lbs. This winch requires a 2 inch wide strap like...
    view full answer...
  • Will the Hex Shaft # DL406102 work on a Worm Gear Hand Winch # DL11002
    The Hex Shaft for Dutton-Lainson Worm Gear Winches # DL406102 that you referenced is designed to fit Dutton-Lainson worm gear winches so yes, it will work on the Worm Gear Hand Winch # DL11002 that you referenced. However, this product is designed to work with 5/8 inch sockets and would not work with your 1/2 inch socket. You will need to order this product separately as it is not included with the # DL11002. I attached an FAQ article on hand winches for you to check out also.
    view full answer...
  • Worm Gear Winch for Car Hauler Trailer
    The type of manual winch I suggest for your car trailer is a worm gear type which prevents the car from rolling backwards even if you let go of the handle. Winch capacity for your application with a rolling load on an incline does not need be very high. As an example, a 2500-lb rolling load on a 10% incline requires only a 500-lb-rated winch. Please refer to the linked article. The Dutton-Lainson 2K Worm Gear Hand Winch # DL11004 can be operated either by the included handle or with the...
    view full answer...
  • Can Winch Strap Be Used On Dutton-Lainson Worm Gear Hand Winch # DL11011
    The Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle # DL11011 referenced in your question is designed specifically for use with a cable like # DL24100. A strap cannot be used with this particular model winch. For a similar style, worm gear hand winch that is designed to be used with a strap, I recommend the Dutton Lainson # DL11002. This has a slightly larger capacity of 2,000 pounds when compared to the model you were looking at and can be used with the winch strap # DL24242....
    view full answer...
  • Worm Gear Winch Recommendation for RIB Inflatable Dingy on a Yacht
    For a worm gear winch that you can use with a strap instead of a cable I recommend # DL11002. You could then use strap # DL24242. You will need to add the hex shaft, # DL406102, in place of the standard shaft to use a variable speed drill with the winch. Worm gear winches are slow and you are bound to get tired moving the load even a few feet so a drill is the way to go. Your 18 volt drill should be more than enough to lift the load. I do not recommend an impact driver because it is likely...
    view full answer...
  • Will the Dutton-Lainson Worm Gear Winch # DL11001 Accept a Strap
    We do have a worm gear winch that will accept a strap, however the Dutton-Lainson Worm Gear Winch, # DL11001, is for use with a cable or rope only. Instead, take a look at the Dutton-Lainson Worm Gear Winch, # DL11002. This winch is basically the same winch as # DL11001 that you referenced, but it has a drum that was designed to accept the bolt that secures the strap to the winch. If you need a strap, I recommend the Dutton-Lainson Hand Winch Strap, # DL24242.
    view full answer...
  • Availability of Dutton-Lainson Worm Gear Brake Winch That Can Use Strap as well as Cable
    We offer worm gear brake winches in various ratings but all are higher than 800-lbs. Our worm gear winches can be seen on the linked page and you'll note their capacities range from 1500- to 3,000-lbs. These are all designed specifically for a cable, such as # DL11011, or for a 2-inch strap, such as # DL11002. The strap for this winch is part # DL24242.
    view full answer...

Do you have a question about this Trailer Winch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.