Yates Y-Style Bow Stop for Boat Trailers - Heavy-Duty Rubber - 7" Span - 1/2" Shaft

Video Transcript for Yates Boat Trailer Y-Style Bow Stop Review

Ryan: Hey everybody, my name's Ryan. And here at Etrailer, we install, test fit, and review a lot of different parts, that way we could try to answer any questions those of you might have. And that's exactly what we're doing here today. We're going to be taking a look at and showing you how to install the line of Yates heavy duty rubber Y-style bow stops for boat trailers. So a bow stop is a simple, yet pretty important component to have on your boat trailer. It's going to do a couple things.

It's going to help prevent you from overshooting whenever you put your boat back on the trailer, whenever you pull it out of the water. And it's also going to help provide just a little bit of support, a little bit of cushion here in the front, whenever you're towing your boat down the road, that way it's not getting jostled around and hitting any metal, anything like that. It's just going to be there to help keep everything riding nice and smooth.So the reason today that we actually replaced the bow stop is you could take a quick look at the original one, and easily tell that it has seen better days. I mean, this thing is so worn out. It probably really wasn't doing any good up here.

So this one is definitely an improvement, and should make things go a little bit smoother. Now with that being said, this is a really thick, heavy duty rubber. So I don't really see it wearing out super fast. So you should get some good years out of it. With that being said, though, this rubber could potentially leave scuffs.

On this old aluminum fishing boat, really not too concerned with it, but if you have a fiberglass boat, especially, for example, it's something you might want to think about.However, there's another bow stop available, and this one's made from a different material and is scuff proof. So if leaving marks here are something you really don't want, you could always use this as an alternative, and that'll prevent any scuffs from happening. So overall, I actually think this turned out pretty nice. Just give me a little bit more confidence whenever I'm trailering the boat, I'm not going to have to worry about overshooting it as much or anything like that. And just whenever I'm trailering it down the road, the rubber actually contours pretty nicely to the bottom of the boat when you tighten everything down.So it should really provide a good cushion, if you will, whenever I am hitting bumps and things like that.

And just going to do a good job of keeping everything in place. Now, as far as the installation goes, it's relatively simple, really not a whole lot involved. One thing I do want to mention is you may have to pick up some new hardware. Doesn't come included with that hardware. But if your original hardware will work and is in good shape, by all means, you can go ahead and reuse that.So with all that being said, shouldn't take you a whole lot of time and really give you a whole lot of issues whenever you do go to put this on. Speaking of which, let's go ahead and do that together now. To begin your installation, you're first going to want to remove your old stop. So I went ahead and took that off and what I've actually done is just removed the whole bracket itself. And I did that because I think it'll be a little bit easier to get everything set up on here and kind of pushed into place.Ideally, you do this with your boat off the trailer. We're just kind of working around that. So I think it's going to be a little bit easier if I have everything somewhat bolted together, I might have a little more leverage to kind of push this up into place. Now, with that being said, keep in mind, every setup is going to be a little bit different. But for the most part, this should get you pointed in the right direction. So at this point, I'm just going to take our new stop, put it in our bracket, line the holes up. And I'm going to take our bolt, work it through to the other side.And what I think I'm going to do, is just tighten this down a little bit. So once I find where it needs to be, once it's on there, we can come back and tighten our bolt down. So now that we have our setup loosely assembled, I'll go ahead and put it into place here. Again, I think I'm just going to get everything hand tight for now, that way it'll kind of just rest in position, and we can get it exactly where we want it. So I found that everything fit best with our bracket down as far as it can go. And now I can position our bow stop.Now our boat is on the trailer a little bit crooked, once I removed our strap it kind of came over. So this should sit more in the center, but I think once we put our strap back on it, it'll pull everything together nicely. But now I got a good idea on how I need to rotate our bow stop itself. So I'm going to kind of eyeball it. I think about there will be proper, then I'm going to snug it down. So now that we have everything tight, if I put a little bit of downward pressure, it looks like everything fits pretty good the way it should. So now that I'm certain I have it lined up where I want, I'm just going to go ahead and connect my winch back to it, and pull it back down on the trailer. That'll finish up our look at and our installation of the line of Yates Y-style heavy duty rubber bow stops for boat trailers..