Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hanger can be configured to work as either a front, center, or rear hanger on tandem- or triple-axle applications. Can be used on single-axle trailers as a front hanger only. Designed to suspend your double-eye leaf spring.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a brief look together at this hangar for double eye springs. This is designed to be used as a front, center, or rear hangar for double or triple axle applications. And this can also be used as a front hangar only on single axle applications. Now, this is going to fit your 1-3/4 inch wide double eye springs with a 9/16 inch diameter eye, and we can tell this by taking this measurement here. Line this up here so you can see.
So as you can see, the opening measurement there inside edge to inside edge is about two inches. And then that's going to narrow as we move up here to about 1-7/8 inches at the top. So this is going to fit a 1-3/4 inch wide double eye spring perfectly. And again, this is going to work with a 9/16 of an inch diameter bolt. I do wanna point out that that bolt is not included.
This is constructed from durable steel. It is a weld-on installation. And let me go ahead and just give you some overall measurements that I think will prove helpful for you. So looking at the overall height from top to bottom, we're sitting right at 3-3/16 inches tall. The overall depth from edge to edge, we're sitting right at three inches deep.
And then the overall width from edge to edge again, right at 2-7/16 inches wide. And then the height from the center of our bolt hole all the way to the top of our hangar, we're sitting right at two, and if I can hold that steady, right at 2-3/8 inches tall. And then you might be wondering about the thickness of this hangar. And so looking at just the thickness there, we're sitting right at 3/16 of an inch thick. I think that's going to wrap up our look today.
I do hope that the information was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (94 Customer Reviews)
Hanger can be configured to work as either a front, center, or rear hanger on tandem- or triple-axle applications. Can be used on single-axle trailers as a front hanger only. Designed to suspend your double-eye leaf spring.The bracket arrived earlier than i expected. It came carefully packaged and is of excellent quality. I am very pleased. Thanks!
As described and ship quickly.
I had some issues with the part missing from the box in transit. Looked like the poor package had been through the ringer. etrailer shipped another almost immediately. Incredible customer service. Will definitely be buying from them in the future!
Part works great. Seems to be really nice quality as well.
I always order trailer parts from trailer. Always fast shipping and you can't beat the prices.
Fast service and great products
This is undoubtedly an excellent company to do business with the fastest shipping I have ever seen
I got exactly what I ordered very quickly and the products are excellent. Thanks.
The trailer shackle brackets worked great and are very strong. I used them to hold my trailer tail gate in the upright traveling position. Today's trailer manufactures make the connections so cheap and they don't last long. The gate will rust off before these brackets brake. I welded one on horizontal to trailer. Cut one in half so it was flat and also welded horizontal to trailer gate raised after lining the holes up for a 1/2" hitch pin. Raise gate and drop in hitch pin, simple and works great. It is an 18' utility trailer with a 5' gate using a gorilla lift system on it because of my senior age and lifting ability.
And don't say this is my to go place when I'm buying parts for trailers. Very satisfied always with my product, and customer service is very helpful when I don't know what the parts that I need
I needed these hangers quickly as we had limited time to fabricate a frame to move a structure. They are well made ,1/2 the price of other vendors and were delivered in 3 days.
the bracket wasjust what I needed. Came very fast. hank you.
Looks great, thanks!
I was very satisfied with the replacement hangers I purchased. They fit perfectly, were reasonably priced, and arrived in a very reasonable amount of time. I will use etrailer again for any future trailer repair I need.
thanks!
Carelessly when shipped the products, didn’t protect the products with bubble wrap. Received as damages products inside the box during shipment. Called in to customer service had to wait 44 minutes.
Jenny N.
6/20/2022
I am very sorry to hear that the order arrived damaged and that it had taken longer then we like to reach us. It is our busy season and we are working to respond to all calls and emails as quickly as possible.
Nice heavy 3/16 steel. Has a little outward bow to it so when you tighten down your bolds it will compress a little but not bind up spring eyes or equalizer.
I welded these to my fifth wheel and they have worked flawlessly. Thanks etrailer. God bless.
Look like very good quality material haven't installed as of yet but they should work perfect.
Shipped almost immediately after I ordered them and received relatively quickly, and the cost to ship was not horrible for me it is probably cheaper than the gas as I am somewhat rural and have nothing close to go purchase in person and even if I did they would not be as knowledgeable as etrailer and you probably won't get what you actually need.
I liked that etrailer shipped rapidly and accurately and the product was perfectly as described.
Great product and customer service was outstanding. I wasn't sure if the hangers would work in the application I was using them for so Jean in customer service pulled the 2 items, measured them and confirmed I was good to go.
Thanks,
Thank you. Received as stated.
Excellent product, Excellent support, Excellent customer service - Good support all around!!
Exce!lent product, just what I was looking for. Great communication and fast shipping too!
Easy order, and it showed up quick.
the order met my expiation and was received when said.
Great product, heavy made hangers, fit well on the trailer.
Would have rated higher if the shipping would have be less expensive
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tom G.
5/8/2014
It is still in good shape and doing great. This trailer is used for hauling in heavy round bales of hay as well as green heavy stalks of tobacco. The hangers had to be replaced because of a tractor running in to the side of the trailer. Your replacement hangers did the trick to get the trailer in running shape again.tom g.