Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 38" Axle Spacing

Item # HAP-103-203-01

Our Price: $681.89

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

hangers suspension kits slipper springs - 3 inch hap-103-203-01

Show All (1) Product Images

Show Fewer Product Images

Need help with installation?

Locate installers near me

Leaf-spring mounting kit includes 6-1/4" tall front hangers, 6-1/2" tall center hangers, 7-11/16" tall rear hangers and hardware. Equalizers are 14-1/4" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles. Great Prices for the best trailer leaf spring suspension from Dexter. Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 38" Axle Spacing part number HAP-103-203-01 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Q & A (0)
Related Parts
Photos

Dexter Trailer Leaf Spring Suspension - HAP-103-203-01

Features:

Attaches 4 leaf springs (sold separately) to your trailer frame
- Use table below to determine hanger location
Includes:
- (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4)
- (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2)
- (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1)
- (1) 14-1/4" Long, left-hand equalizer (13-107-7LH)
  - Allows for 38" between axles
- (1) 14-1/4" Long, right-hand equalizer (13-107-8RH)
  - Allows for 38" between axles
- (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95)
- (4) 1/2" Diameter locknuts (6-46)
- (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169)
- (4) 1" Diameter locknuts (6-112)
- (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170)
- (2) 1-1/8" Diameter locknuts (6-72)
Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles
Does not include components for mounting axle to springs

Axle Capacity	A - Distance Between Front and Center Hangers	B - Distance Between U-Bolts	C - Distance Between Center and Rear Hangers	D - Distance Between Center of Axle and Trailer Frame
10,000 lbs - 15,000 lbs	33"	38"	32-2/5"	5-1/2"

HAP-103-00 and HAP-203-01 Dexter Hanger Kit - 3" Slipper Springs - 10,000 lbs to 15,000 lbs Heavy Duty

See what our Experts say about this Dexter Trailer Leaf Spring Suspension

Do you have a question about this Trailer Leaf Spring Suspension?

How to Determine if Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2 Slipper Springs Will Work
I can tell you how to determine that, but there isn't a specific fit for any trailer, including your Big Tex, for the Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs # HAP-158-258-03. Since you have 10,000 lb Dexter axles, you're set there, and you likely have 2-1/2 inch slipper springs (though you may want to measure their width just to be sure), so all you have to do is measure you axle spacing. To do this, simply measure from the center of one axle to the center of...
view full answer...
Can 10K Leaf Springs be Upgraded to 3 Inch Wide 12K Springs for Gooseneck Trailer
You can definitely upgrade the leaf springs from a 5-leaf 2-1/2" wide system to a 6-leaf 3" wide system but you'll basically need to swap out your whole suspension system. It's also good to note that even if your leaf springs are rated for a higher capacity it won't increase the weight rating of your axles. We don't recommend overloading the trailer but that's obviously up to the end user so I'll let you know what parts you need so you can install the larger springs. On your axle you need...
view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?

Info for this part was:

Updated by:

Wilson B

Updated by:

Eric H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.