CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
(37 reviews)
Price: $13.90
In Stock
CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
Item # CE14016G
Retail:$26.24
Our Price: $13.90
You Save: 47%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (37)
- Q & A (0)
- Photos
CE Smith Trailer Leaf Spring Suspension - CE14016G
- Hangers
- Boat Trailer
- Snowmobile Trailer
- Slipper Springs - 1-3/4 Inch
- 2-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- 9/16 Inch Diameter
- CE Smith
This hanger bracket secures the eye end of a slipper spring on your aluminum or steel trailer's suspension. It is constructed of corrosion-resistant galvanized steel and accepts a 9/16" shackle bolt.
Features:
- Heavy-duty bracket connects the eye of a slipper spring to your trailer
- Bolt-on installation
- Attaches to the underside of trailer frame
- Does not include mounting hardware
- 7-Gauge, galvanized steel construction is sturdy and resists corrosion
- Made in USA
Specs:
- Application: front of slipper spring
- Overall dimensions: 4-1/4" long x 2-1/4" wide x 2-1/4" tall
- Inside width: 1-7/8"
- Diameter of shackle bolt holes (each): 9/16"
- Quantity: 1 bracket
Install a new suspension without the hassle of welding a hanger to the bottom of your trailer. Bolt-on design attaches to the bottom of your trailer frame and provides a mounting hole for the 3" long shackle bolt that goes through the eye of your slipper spring.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
14016G 7-Gauge, Galvanized Steel Replacement Front Slipper Spring Hanger Bracket by CE Smith
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1 - CE14016G
Average Customer Rating: 4.8 out of 5 stars (37 Customer Reviews)
This hanger bracket secures the eye end of a slipper spring on your aluminum or steel trailer's suspension. It is constructed of corrosion-resistant galvanized steel and accepts a 9/16" shackle bolt.by: Dennis A06/03/2014
I used these 'front' brackets for both front and rear ends of my leaf springs, because I couldn't find a bolt-on rear bracket. I had to bend 1/4" offsets into each of my rear shackles to make the rear brackets work. I added a spacer between my shackles to keep them perpendicular. The original rear clip was 1-3/4" wide on the outside and the shackles were outside the clips. I used 3/8" bolts to attach the brackets to my 3"x1-1/2" steel tube trailer frame. The bracket mounting tabs are drilled for 7/16" bolts, and I would have preferred to use 7/16" bolts, but I couldn't find that size at my local hardware stores. I moved my axle forward to rebalance my boat trailer, because I put a smaller engine on which made tongue weight way too heavy. I went with bolt-on brackets because I could do it myself (I don't have welding equipment). Overall, I'm satsified.
by: Doug 02/07/2024
Good quick service and reasonable prici ng
by: Excellent09/14/2016
Awesome product. great delivery service... Product will be used to hang thr leafsprings on my boat trailer.
by: Kevin 01/19/2023
I rebuilt a small utility trailer. The axle was a little too far forward for me. I used these in case I didn’t like the position. I left the original hangers in place in case I wanted to change the axle back. I haven’t moved it back because the new position balances the trailer just right.
by: Felton03/27/2023
I love your quick shipping and follow-up. You have always shipped my purchases on the same day I ordered and promptly gave me tracking info.
Thanks!
by: Ron J12/12/2017
I' M VERY HAPPY WITH ALL THE PARTS I RECIEVED , AND THE PROMPT SHIPPING AND FOLLOW UP IS APPRECIATED.
THIS LITTLE PROJECT IS FOR A SMALL TRAILER I HAD PRETTY MUCH LET RUN DOWN AND AFRAID TO GET OUT ON THE INTERSTATE WITH.
THE NEED FOR ME TO BECOME SANTA AND TAKE A LOAD OF GRANDKID PRESENTS TO NASH TN PUT ME IN A BIND TO GET THE TRL FIXED ASAP.
YOU GOT ME FIXED UP AND I WILL ORDERING FROM YOU.
I HAVE TWO CAR HAULERS AND A FLAT BED SO I NEED STUFF REGULARLY.
THANKS AGAIN , MERRY CHRISTMAS
DO YOU GUYS SELL TRAILERS ? I'M GOING TO WANT A 12FT X6FT TANDEM CARGO, ODD SIZE, BUT IT WILL BE A PARTS TRAILER . NO WHEEL WELLS INSIDE . WE MOVE OLD CAR PARTS AS WELL AS MESS WITH VINTAGE CARS.
by: Kenneth11/30/2022
We have not tried to install yet, will let you know after installation. Thanks
by: Adnama06/04/2016
I have a messed up system for lead springs and have been looking for a cheap, bolt on system to replace the current welded setup I have. I need to move the axle back 6 inches to redistribute the weight for a tiny house project and these seem like they will do the job.
I have a slipper spring system, but the slipper portion is more like a hook, so I can use these for that. As for the front, I need to order 2 more because I wasn't sure if the depth of the hanger would work for the width of the eye, but it will.
These hangers will make it so much easier than having to weld on new brackets.
by: Lionel D12/29/2015
bracket worked well although it seems like the 9/16 hole is slightly larger on one side than the other making a tight fit with the bolt I purchased causing it to only go in the bracket from one side... not a problem but if you want to have both sides of the trailer with bolt and nut on same side of the bracket you might want to dry install before securing the bracket onto the frame to know which way to install the bracket
by: Jimmy H.05/16/2015
Bolt-On spring hangers can't be bought for love or money in any "Brick & Mortar" store in Atlanta. I tried. Etrailer had just the thing with the CE14016G and it's slip-spring sister the CE14017G. I appreciated the feature that I had choice of bolting through the single 1/2 in bolt hole in the center, or the smaller two on the the tabs. It sure beat looking for a welder or bumming an industrial drill press to put holes in the regular hangers. Etrailer did a timely job of shipping on time. The new springs are hung, and I'm looking forward to pulling my boat out of the water.
by: Theodore05/03/2021
Still hanging there after a year! No problem.
Seriously, these brackets worked perfectly.
by: Dan G.02/02/2017
The brackets I ordered from etrailer are high quality and will work perfectly for my application. I received my order quickly and am very pleased.
Thanks etrailer!!!
by: Keel Roller03/02/2017
Easy to find product, order and get it delivered.
Replaced the entire suspension system for my small boat trailer.
Great price AND fast customer service!
I will shop here again!!!
by: Dave S05/18/2017
All Parts for trailer suspension fit perfectly. Shipping was lightening fast. Excellent products and service.
by: John08/09/2019
really great fitting to accommodate and repair older trailer
by: Steven 04/17/2021
Exactly what I needed to make my trailer right. “Details” were very helpful.
by: Anthony04/09/2015
This is my 3rd order from etrailer - Excellent service
Thank you,
by: Robert05/09/2018
Very happy with item and pricing will do business here again
Robert
5/9/2019
We put that suspension on our boat trailer and it serves the purpose and it works good and it was easy to install. So all-in-all we are very satisfied thank you
by: Mario02/28/2021
Delivery was excellent, No missing parts. Axles are holding up excellent. Your site was very helpful full of info to help select the correct part. Have no complaints and will order from you in future .
by: Arthur J.10/07/2014
This is my second order, perfect! Rebecca was a tremendous help with the details and the order was shipped the same day even after placing the order late in the day. All the item ordered were excellent quality wise as well! Thanks
by: Manny Garcia 07/24/2017
it is one of the best websites excellent explanation and description of your product with the videos i love the large luler thank you
by: R.ROBINSON08/04/2017
EAYS ORDERING WEB SITE, SHIPPED ON TIME AT A GOOD RATE. ALSO HAD EXCELLENT PACKAGING.
by: James08/22/2019
Great company, and Great products, just what I was looking for. Heavy duty, and zinc coated.
by: Thomas P.06/03/2016
The hangers are well made and fit perfectly. Excellent price.
by: WTG06/08/2016
Exactly what I needed. Initial problem with online order qty - called in and service was great!
25
37
Show More Reviews
See what our Experts say about this CE Smith Trailer Leaf Spring Suspension
- Switching From Slipper Spring Single Axle Trailer to Double Eye SuspensionI recommend the Single-Axle Trailer Hanger Kit for Double-Eye Springs # APS2. With the double eye leaf spring you will need to add shackle straps to allow the leaf spring front to back movement when compressing. While the CE Smith Front Hanger Bracket # CE14016G will bolt in place where your rear mount is it will not be the correct width to be used with the double eye springs shackle straps. We have a great article "DOUBLE-EYE TRAILER SUSPENSION SYSTEM" linked below. This will help you...
view full answer... - Hanger Compatibility For Bolt-On Application On 2016 Tracker TrailerThe Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole # E4139 is a weld on application. It hasn't been tested for bolt on installations, so I can't confirm it will hold up if you drilled it and bolted it in place. We have only 2 bolt-on hangers and they are for slipper springs, # CE14016G and # CE14017G.
view full answer... - Are there Bolt-On Hangers for Trailer Leaf Spring SuspensionWe do have a couple of bolt-on spring hangers # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR. Its not likely that professional welder would charge that much. You might be able to find one locally via an iron workers union near you. For u-bolts for your 1-1/2 inch square axle you can use # SP01-120 for 2 u-bolts and 4 nuts. For a u-bolt plate you can use # 115983. For a hanger kit you could use # APS1. Now what you could do is...
view full answer... - Replacing Hangers with 3 Mounting Holes on a 1990 Escort Boat TrailerWe do have a few hangers with 3 holes in the top, like parts # CE14016G and # CE14017G, but they are for 1-3/4" wide slipper springs. The former is 2-1/4" tall while the latter is 1-3/4" tall. If these match your current hangers then look no further! These are for bolt-on installations but all of our other hanger options are weld-on applications. Otherwise you may be better off to choosing a different hanger from the linked selection and have it welded by a professional to your trailer....
view full answer... - Bolt On Slipper Springs for 1-3/4" Wide Slipper Springs on a Small Single Axle TrailerThe only bolt-on hangers we have for 1-3/4" slipper springs come from CE Smith: - Front # CE14016G - Rear # CE14017G Attached are some review videos for you to check out!
view full answer... - Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No SuspensionYou will need 2 of the Front # CE14016G and Rear # CE14017G hanger brackets to attach 2 of the 2-Leaf Slipper Springs # SP-177275 to your cart. You will need 2 of the Zinc Shackle Bolts # TRFA73Z916DLNZ to attach the leaf springs to the front hanger. If you can tell what shape and size axle you have I can help you find the U-Bolt Kit you need. We have some like the 1-1/2" Square # CE23102 or 1-3/4" Round # CE23000 depending on the size of your axle.
view full answer... - Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016GThe 3 inch shackle bolt part # 166081 would be a great option to use with the CE Smith suspension hanger part # CE14016G. This would be a better fitting size than going with the longer 3.5 inch bolt you mentioned.
view full answer... - What Is the Mounting Hole Diameter on the CE Smith Front Hanger Bracket # CE14016GThe top mounting holes on the CE Smith Front Hanger Bracket # CE14016G are as follows: The 2 top holes on the ends are 7/16 inches in diameter The center top hole is 1/2 inch in diameter The lower spring eye holes are 9/16 inch diameter I have included a picture showing these measurements for you.
view full answer...
- Recommended Bolt On Hangers For Aluminum Frame TrailerSince you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR you were looking at. If you went this route you would want to use something like the # SP-040275 as your springs, which have a 3700-lbs capacity. This would be the best solution available for your new aluminum trailer,...
view full answer... - How to Get Clearance for Slipper Spring Compressing on Top of Wheel WellTo answer your first question a double-eye spring would not compress less than your current 4-Leaf Slipper Spring w/ Open Eye End # e33SR and I do not recommend going with a higher-rated spring than what your trailer is rated for as that will make your ride very stiff and unpleasant. The only real options you have to get more clearance are to raise the fender if you can or add one that has more height (I have linked our selection of fenders for you to check out) or to cut off your current...
view full answer... - Availability Of Suspension Hanger Bracket With Mounting Holes Near 3 On CenterThe CE Smith Front Hanger Bracket # CE14016G is the closest we have the Bracket # CE14026G. This hanger places the mounting holes at 3-3/8" on center.
view full answer...
- Are Galvanized Leaf Spring Hangers AvailableIf your trailer uses slipper springs, we do offer galvanized hangers. They are part # CE14016G front hangers, and # CE14017G for rear hangers. We also carry some galvanized shackle links. You can check them out at the attached link.
view full answer... - Replacement Front Hanger Slipper SpringsFrom your picture it looks like you have a slipper spring hanger. We have a similar part, part # CE14016G, but it only measures 4-1/4 inches and yours is 5 inches. Ours is also 2-1/4 inches tall. It fits 1-3/4 inch wide springs and it sounds like yours is for wider springs. If your springs are actually 1-3/4 inches wide and is 2-1/4 inches tall then this will work for you. Unfortunately this is the only hanger we have in this style.
view full answer...
- Hanger for 2-Inch Leaf SpringsThe CE Smith front hanger bracket for trailer slipper springs # CE14016G you referenced cannot be altered. Once steel bends it will continue bending over time and could cause a serious problem. Hangers for 2-inch wide springs should be welded to the frame, hence the reason bolt-on hangers are not made. The closest match hanger for your 2-inch wide slipper springs is the Redline center hanger # 29-1. It is designed for trailers with 3,500 pounds to 9,000 pound axles and is 3-1/2 inches...
view full answer... - CE Smith Front Hanger Bracket # CE14016G Mounting Hole DimensionsThe CE Smith Front Hanger Bracket # CE14016G 7/16" mounting holes are 3-3/8" on center.
view full answer... - Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?Thanks for the picture! The spring shouldn't hit the frame like yours does in the picture, so the correct solution would be to either add a longer front hanger or using a shorter spring. The correct replacement hanger will be dependent on the width of your spring. If you have a 1-3/4" wide spring the longest hanger we offer is the CE Smith Front Hanger Bracket for Trailer Slipper Springs # CE14016G which is 2-1/4" tall. If you can tell me the width of your current spring and the height...
view full answer...
- Can Trailer Suspension Hangers be Bolted OnThe top holes you see in trailer suspension hangers such as Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear Item # APS3 are for button welds and not bolts so these hangers should not be bolts on. The problem is that with a weld the hanger is fixed and cannot move. With bolts no matter how tight you make them the bolt will always be smaller than the holes in the hangers and given the forces applied could cause the hangers to shift and throw off the alignment...
view full answer... - Options for Installing CE Smith Front Hanger Bracket on a Trailer with a Boxed FrameThe best way that I could thing of would be to drill access holes and then fishwire carriage bolts through the access hole and the opening of the frame. Check out the FAQ article I attached doing this to install hitches. Its a different application, but its the concept I am talking about. It would be up to you to determine if this method would be possible for your trailer.
view full answer... - Shackle Bolt Recommendation for the CE Smith Front Hanger Bracket # CE14016GThe diameter of the holes that are used for installing leaf springs is 9/16 of an inch. A bolt like the part # 166081 would work as it is 3 inches long and the bracket is 2-1/4 inches wide.
view full answer... - Size of Mounting Bolts for CE Smith Front Hanger Bracket # CE14016GThe size of bolts for the CE Smith Front Hanger Bracket, part # CE14016G, are as follows: The 2 top holes on the ends take 7/16" diameter bolts. The center top hole takes 1/2" in diameter bolts. The lower spring eye holes take 9/16" diameter bolts. I have included a picture showing these measurements for you. I recommend using grade 5 galvanized bolts.
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Installed by:
Joe V
Installed by:
Jeff D
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
David L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
12/12/2017
Ron, The largest utility trailer we sell at this time is the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. The bed dimensions are 88 inches long x 52 inches wide x 24 inches tall and has a 1.640 lb payload capacity. I hope this helps. I have attached a link for your reference. Thank you.
Helpful Links
Trailers/Detail-K2/K2MMT5X7.html