New Hangers for my Trailer
Question:
This is the bracket I think I need and I am now looking for the bracket mounting hardware. Can you suggest a square u bolt that will fit this bracket? The trailer frame is square and is 1 9/16 wide x 4 tall.
asked by: Alex F
Expert Reply:
I've got a solution for you. Unfortunately the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - part # CE14026G you looked at aren't going to work. I measured the mounting hole on it and they are on 1 9/16" centers which means half of each hole will be covered by your trailer frame. I then checked out CE Smith Front/Center/Rear Hanger part # CE14035G40 and those hoes are on 1 5/8" canters still no good for your application.
After some brainstorming I came up with two options both of which need to be welded on. The etrailer.com Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole part # 115918 will give you a connection point for your springs 1 1/4" from your frame and etrailer.com Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole part # 115917 will give you a connection point 1 1/2" from your frame. These will both be 1 7/8" wide outside to outside so they will be a little wider than your frame but that won't negatively effect anything. Sorry the solution isn't easier.
Products Referenced in This Question
Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Trailer Leaf Spring Suspension
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 1-1/2 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Trailer Leaf Spring Suspension
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/2 Inch Tall
- Tandem Axle
- Triple Axle
- etrailer
more information >
CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Accessories and Parts
- Trailer Leaf Spring Suspension
- Brackets
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Accessories and Parts
- Trailer Leaf Spring Suspension
- Brackets
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Shop: Replacement Shackle Strap - 2-5/8" Long - Galvanized
- Shop: CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Shop: CE Smith Shackle Strap - Galvanized Steel - 2-3/4" Hole-to-Hole Length
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Shop: Fulton Economy Spare Tire Mount - Lockable
- Q&A: What Size Bolt-On Leaf Spring Hangers Are Available
- Shop: Trailer Wiring
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: fender
- Search Results: leaf spring hanger
- Search Results: hanger bracket
- Shop: 7-Way Molded Trailer Wire Connector - 3' Long
- Search Results: trailer wire extension
- Search Results: wiring
- Search Results: shackle with shank
- Search Results: equalizer galvanized
- Video: Fulton Economy Spare Tire Carrier with Lock Review
- Shop: Gooseneck Hitch
- Q&A: Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Q&A: Availability Of Suspension Hanger Bracket With Mounting Holes Near 3 On Center
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Best Fifth Wheel Hitch
- Shop: Suspension Enhancement
on Accessories and Parts
