bing tracking image
  1. Trailer Leaf Spring Suspension
  2. etrailer
  3. Hangers
  4. Suspension Kits
  5. Boat Trailer
  6. Camper
  7. Car Hauler
  8. Snowmobile Trailer
  9. Utility Trailer
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center

Item # AP233-H248
Retail:$77.05
Our Price: $72.24
You Save: 6%
Trailer Leaf Spring Suspension
Shipping Weight: 23 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Leaf-spring mounting kit includes 3-1/4" tall front hangers, 3-5/8" tall center hangers, 3-1/4" tall rear hangers and necessary hardware. Equalizers are 5-3/4" long. Components for mounting axle to springs sold separately. Great Prices for the best trailer leaf spring suspension from etrailer. Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center part number AP233-H248 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (82)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Spring Suspension - AP233-H248

  • Hangers
  • Suspension Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Double Eye Springs
  • Tandem Axle
  • etrailer

Leaf-spring mounting kit includes 3-1/4" tall front hangers, 3-5/8" tall center hangers, 3-1/4" tall rear hangers and necessary hardware. Equalizers are 5-3/4" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 4 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 4-1/2" or 5" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (4) 3-1/4" Tall front and rear hangers
    • (2) 3-5/8" Tall center hangers
    • (2) 5-3/4" Long curved equalizers
      • 9/16" Diameter center and side holes
    • (8) 2-1/4" Long shackle straps
    • (14) 3" Long x 9/16" diameter shackle bolts
    • (14) 9/16" Diameter locknuts
  • Designed for use on trailers with tandem, 2,000-lb to 7,000-lb axles
  • Does not include components for mounting axle to springs


Hanger Locations for Tandem Axle

Leaf SpringsA - Distance Between Front and Center HangersB - Distance Between Center and Rear HangersC - Distance Between U-BoltsD - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-169275 (1020)25"25"29"5"1-3/4"
(typical 2,000-lb trailer axle)
SP-219275 (PR722)
SP-220275 (PR3)
SP-218275 (PR4)
SP-212275 (PR4B)
SP-111275 (PR5)
SP-198275 (PR6)
29-1/2"29-1/2"34"4-1/2"2-3/8"
(typical 3,500-lb trailer axle)


TSW-20 Tandem Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs

Replaces AP233-H248





Customer Satisfaction Score:


Customer Reviews

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center - AP233-H248

Average Customer Rating:  4.4 out of 5 stars   (82 Customer Reviews)

Leaf-spring mounting kit includes 3-1/4" tall front hangers, 3-5/8" tall center hangers, 3-1/4" tall rear hangers and necessary hardware. Equalizers are 5-3/4" long. Components for mounting axle to springs sold separately.

by:

Brackets came not bent enough and bolt nuts are oval shapped and won't thread because of this. Pretty disappointing I will call customer support soon for replacement

Etrailer Expert

Jenny N.

2/6/2024

This is not what we want you to receive. Customer Service will be in touch with you so that we can have new ones sent out.

Tanner G.

2/8/2024

Hasnt been a year but they sent me brand new lock nuts that worked perfectly. Overall happy about the customer service and how fast they fixed the problem



by:

Kit is supposed to be for 1-3/4" springs but the center hangers were for 2", they said they would reship but after a week it still hasnt shipped out. Looks like fair quality stuff just packaged wrong in China!

Etrailer Expert

Jenny N.

1/11/2024

I am sorry to hear that the wrong hangers were sent in the kit. I will have our Customer Service team contact you about the status of the new hangers shipping out.



by:

I'm pretty disappointed with the kit. The box they come in is junk for shipping so if it's not part of a larger box, you'll be missing parts. My first kit came missing the bolts, nuts, shackles, and one hanger. The second kit was just about to split open but didn't lose anything. The center hangers are not bent anywhere near 90 degrees on each leg so you'll need a stout vise to bend them together enough to get the bolt through and a nut threaded on. The bolts are shipped loose so the threads on about half of them are boogered up. Customer service is great at etrailer and they sent a replacement kit right out but they'd save themselves a whole lot of hassle by upgrading their packaging.



by:

Quality stuff. Timely delivery. If you need suspension parts they’ve got it and will work with you to get it right.



by:

The AP233-H248 axle hanging kit came super fast. It was the correct size and excellent quality. I didn't think about ordering spring eye bushings, but that is nobody's fault but mine. I'm planning to order from etrailer.com again.



by:

the box with the hanger kit had been very wet at one point and the parts inside had started to rust. It didn't happen in the bigger box it was shipped in because the smaller box with the spring mount kit was fine. The parts are usable but whoever packed it new what they were shipping.



by:

As an old man installing them took me some time, but very doable. Very pleased with the quality. Would highly recommend.

Steve

10/28/2023

Still there. The only thing I would suggest is to paint the hangers as the equalizers rust very easily.



by:

Well, you guys did it again.Great price,really like the kit(s) both will work well with what I'm doing. Thanks Josh,you were very helpful and I appreciate you taking the time to listen to me explain what I wanted to do.



by:

Great improvement, every trailer should leave the factory with these installed!

Also cut and welded crossmembers between spring hangers.

No sway, no twisting from front to back of RV

Steve

1/18/2021

Trouble free



by:

I t fit perfectly to replace my old 40 year wore out trailer suspension.
Reason for only 4 stars is the shipping boxes are Chinese cheap and a bolt was missing from shipping Kaos

I was able to get one from a local trailer supply.

They need to step up to a better grade of shipping container nobody likes to get their stuff with Parts missing



by:

Perfectly replaced old rusty worn parts /bolts.



by:

Excellent pricing and support all the way around.
Thanks



by:

Everything shipped fast. The hanger kit package was tore up and missing 3 nuts though.

Etrailer Expert

Jenny N.

3/2/2023

Well missing nuts is no fun. I will have our Customer Service team reach out to you.



by:

Pretty junkie. most of the nuts are rusted along with some of the hangers. The hangers are not bent square or parallel. The bolt will not reach thru to start a nut.
If I wasn't really needing them I would send them back

Etrailer Expert

Jenny N.

12/26/2022

Honestly that does sound like a messed up kit. I will have Customer Service reach out to you to find a solution.



by:

I was very impressed with e trailer. Found the parts I wanted easy. Great price. I live in Texas and the parts got here in only 2days! Then I got a follow up email asking if I got everything I ordered. I love this place. I will definately will be ordering more parts.

Philip H.

5/5/2015

Patrick, well it went on a boat trailer which doesnt get used alot but i have had no problems what soever so far. all good.



by:

Some bolts were missing. Called customer service and they immediately sent out the replacments. Great service!



by:

Always go to etrailer.



by:

Good weld on kit. Good quality. It’s working great!



by:

Using the hangers to restore an old trailer. The only problem I ran into was that my six leaf springs have three quarter inch bores and the standard bushings are eleven sixteenths. I'll have to machine something for that. Shipping was excellent and here before I was ready. Thanks



by:

I received an email on the conformation of the order very quickly. The order was thenprocessed the very next day, and sent out. I received the parts well before the original due date. The parts were in good condition, and the heavy parts we stapled to the shipping box so they wouldn't move around and damage the other parts. Excellence care.
I won't be able to install the parts. By the looks of the parts, they look like they will fit properly and be exactly what the trailer needs. Thank you again for the prompt and caring service. I will highly recommend you.

Kriss K



by:

i built a 20 foot tandem axle flat-deck trailer wanted to put new hangers on it etrailer sent me exactly what i needed and had helpful info on installing my parts made it real simple il be buying all my trailer parts from etrailer from now on. thank you etrailer.




by:

This is my second order with Etrailer.com and like before the products are a good value. I will be ordering more in the future. I will send pictures once these parts are installed.



by:

After a year of use, still going strong. Have taken the trailer over many bumpy dirt roads every month.

Jeffm

7/23/2020

2 years later and no issues! Crazy bumpy dirt roads and heavy loads.



by:

The parts are great quality and showed up to my door very fast. Furthermore, the etrailer team was super helpful when the exact part I needed wasn't going to be stocked for another 2 months. The etrailer team caught this before I even noticed and suggested an alternate option that would work equally as well and it was in stock.

You Guys ROCK!


25
82
Show More Reviews

See what our Experts say about this etrailer Trailer Leaf Spring Suspension

  • Hanger Kit for Tandem Axle Trailer that Needs More Wheel Clearance
    Since you said your tires were rubbing I would go with a hanger setup that is a little taller like the part # AP233-H248 which has 3-1/4 inch front/rear hangers and 3-5/8 inch center. Also, while the 60/40 rule for axle placement is a great starting point it's no the end-all-be-all for placement. The best location for the axles will be where the weight of the trailer will have it's tongue weight as 10-15 percent of the total trailer weight.
    view full answer...
  • Height of Equalizers Included in Tandem-Axle Trailer Hanger Kit # AP233-H248
    Yes, the equalizers included in the Tandem-Axle Trailer Hanger Kit # AP233-H248 measure 2 inches tall (from eye hole to eye hole on center). I have attached a diagram to assist.
    view full answer...
    Image 1 for
  • Replacement Suspension Parts Needed for Atlas Trailer with Tandem 3,500 lb Axles
    It sounds like you have this hanger kit # AP233-H248 installed on your trailer, which has the hangers spaced out by 29-1/2" on center. We don't have the exact specs from trailers that have been made over the years so you'll want to confirm this on your end of things. If this is true then it means you need the following parts to replace your suspension: - Suspension Kit for Tandem-Axle Trailers # AP233 - 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles # e54SR This gives you replacement...
    view full answer...
  • Tandem Axle Hanger Kit Recommendation that has 5-3/4 inch Center Hangers
    For a trailer suspension kit that comes with 5-3/4 inch equalizers you would want the part # AP233-H248 instead of the # APT5. Aside from that and the center hangers being slightly different to accommodate the different equalizers the kits are the same.
    view full answer...
  • Are Longer Shackle Straps Available to Replace the Ones In Trailer Suspension Hanger Kit AP233-H248
    The shackles including with trailer suspension hanger kit # AP233-H248 are 2-1/4 inches long measured from the center of one hole to the center of the other. The overall length is 3-1/2 inches. The longest shackles we have are 3-1/2 inches long (measuring between the holes on center) at 4-3/4 inches long overall, # TRSL350. I have included a link to the shackle straps we carry. There are several lengths available. If you just need the shackle straps and equalizers you could get them separately...
    view full answer...
  • Hanger Kit With Leaf Springs For Mounting Tandem Axle Trailer Suspension for 2" Square 3500LB Axles
    On our page for the Tandem-Axle Trailer Hanger Kit # AP233-H248 we will have a diagram for the hanger measurements when using four of the Springs # e54SR. You will need the CE Smith U-Bolt Kit # CE23103 to attach your 2" square axles.
    view full answer...
  • Replacement Suspension Parts for Tandem Axle Travel Trailer
    The 3,500 lb axle is the most common size 2-3/8 diameter axle, but it isn't the only one. If you have the odd-ball 2,800 lb axle, then you will have the different bearings, seal, and hubs you referenced because of the spindle dimensions. Each axle is rated individually by the manufacturer and the spindles are in the case the reason for the lower rating. The springs you currently have are not available from our manufacturers in the size. You will need to replace the hangers as well...
    view full answer...
  • Trailer Suspension Kit and 6 Inch Long Equalizers for Tandem Axles and Double Eye Springs
    Suspension kit # APT4 for tandem axles with double eye springs has 6-1/4 inch long equalizers so it is a possible option for you. Kit # AP233-H248 uses 5-3/4 inch long equalizers. But if you have to have equalizer # TREQ310 then the individual parts will have to be pieced together since there isn't a kit with that equalizer. If you go that route then you would also need: 8 of # 18-11GALV 14 of # 166081 1 of # H248 (or other hangers, see link)
    view full answer...
  • Availability of Equalizer Kit for 5-3/4 Inch Curved Equalizers
    We have a kit for 5-3/4 inch long equalizers that will work for you, but it will include replacement hangers. The # K71-449-00 kit does not include hangers. The kit you will want to use is the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # AP233-H248. This kit includes 2 of the 5-3/4 inch curved equalizers like you referenced. Also included are shackle straps, shackle bolts, and lock nuts. The included hangers measure 3-1/4 inches tall for the front and rear, and 3-5/8 inches...
    view full answer...
  • Will Trailer Suspension Hanger Kit # APT5 Fit a Trailer with 2-3/8 Inch Diameter Axle
    You can use the Tandem-Axle Trailer Hanger Kit # APT5 for your trailer with the 2-3/8 inch axle. A 2-3/8 inch diameter axle is typically found on 3,500 pound axles which is within the range of this kit (2,000 to 7,000 pound axles). The measurements in the chart on the page can be used as a guide. A better option for a 2-3/8 inch axle is kit # APT3, # AP233-H248, or # APT1. It all depends on the axle spacing, spring measurements, and equalizer length.
    view full answer...
  • Solution for Needing Replacement Leaf Spring for 5,000 lb Axle
    I wish we could help with the axle but we don't have any straight axles in the dimensions you need nor do we have any leaf springs that are 58 inches long. Most of the current leaf spring dimensions are about half that so what you'll most likely have to do is install new hangers to use a modern size leaf spring like the # e44SR which is for a 5,000 lb rated axle and is 25-1/4 inches long from eye to eye. For a tandem axle hanger kit you could use the part # AP233-H248 which comes with...
    view full answer...
  • Tandem Axle Trailer Suspension Hanger Kit To Provide More Axle Clearance
    It sounds as if your trailer suspension was built with the common Tandem-Axle Trailer Hanger Kit, # APT3, and that the springs and attachment hardware are wearing out enough that with the weight you are carrying there is no longer enough room for the suspension to work without contacting the trailer frame. I would recommend stepping up to the Heavy Duty Tandem-Axle Trailer Hanger Kit, # APT3HD, or the Tandem-Axle Trailer Hanger Kit, # AP233-H248. The # APT3HD kit comes with 2-1/2 inch...
    view full answer...
  • How Much Space Should be Between the Top of the Axles and the Bottom of a Boat Trailer
    Normally when using hanger kit # AP233-H248 with spring # e66SR the distance from the bottom of the frame to the center of the axles is going to be approximately 4-1/2 inches. Subtract half the width of the frame then to the top of the axles that would be 3-5/16 inches. Two inches might work out fine depending on how far the suspension travels but more height would likely be needed considering the heavier load. Hanger kit # APT4 would provide more height since it has taller hangers than...
    view full answer...
  • Parts Needed To Mount 5,200LB Tandem Axles To a Homemade Car Hauler Trailer
    To attach your axles to the the frame of the car hauler you will need the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # AP233-H248. This kit includes all the hangers, equalizers, shackle straps, shackle bolts and nuts to fit your axles. I have linked an article below that will help you with positioning the axles on your trailer to ensure that you have the correct percentage of tongue weight when towing to be safe. If you would prefer to have an upgraded suspension the Dexter...
    view full answer...
    Image 1 for
  • Tandem-Axle Trailer Hanger Kits For Double-Eye Leaf Springs With Different Height Hangers
    Spring hangers are only to be mounted with the base of the U facing the frame. We do offer an array of different kits for a tandem axle trailer listed below or you can also find the hangers individually. If you can offer me some measurements of your current hangers and what amount of rise or drop you are looking to achieve I can give you my recommendations. Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear # APT5 Tandem-Axle Trailer Hanger Kit for Double-Eye...
    view full answer...
  • Hanger Kit, Leaf Springs, and U-Bolt Kit for Dexter 3,500 lb Trailer Axle
    The Dexter axle part # 35545I-ST-89 is a 3,500 lb trailer axle so for a leaf spring that would work well with that you'd want the # e45SR which is the same rating and is 25-1/8 inches long. Then for a tandem hanger kit you'd want the # AP233-H248 and the U-bolt kit part # CE23002.
    view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.