Trailer Suspension Hangers for Dexter Heavy Duty Suspension Kit # K71-360-00
Question:
I am purchasing the suspension kit #K71-360-00. Could you please tell me what hangers go with this kit? I have 7000# axels and 16 inch wheels.
asked by: Tim
Expert Reply:
There are different hangers that you could use with the Dexter heavy duty suspension kit # K71-360-00. To achieve 4-1/2 to 5 inches clearance between the trailer frame and axles you could use 6 of hanger # 28-5.
To achieve 3-1/2 to 3-1/4 inches clearance you could use 4 of front/rear hangers # 115917 and 2 of center hanger # 115918 but these are usually found on lower capacity axles.
These are going to be the most common set ups and should work well for you.
Products Referenced in This Question
Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Trailer Leaf Spring Suspension
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 1-1/2 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Trailer Leaf Spring Suspension
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/2 Inch Tall
- Tandem Axle
- Triple Axle
- etrailer
more information >
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Leaf Spring Suspension
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Trailer Leaf Spring Suspension
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Dexter
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Dexter Single-Axle Trailer Hanger Kit for 3" Slipper Springs - 6-1/4" Front
- Shop: Center Hanger for 2" Wide Slipper Springs - 4-1/2" Tall - 7/8" Bolt Hole
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall Front
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Recommended Hanger Kit for a Triple-Axle Trailer Hanger Kit for Double-Eye Springs
- Q&A: Recommended Double-Eye Springs and Hangers To Mount Lippert Center Point On Trailer W/ 5300lb Axles
- Q&A: How are the Leaves of the 6-Leaf Double-Eye Spring # PR6 Held Together
- Q&A: Where To Position Trailer Leaf Spring Hangers on Triple Axle Trailer Before Welding
- Q&A: Troubleshooting Front Equalizer On Triple Axle Trailer Hitting Trailer Frame
- Q&A: Leaf Spring Recommendation for 5k Axle that is 25-1/4 inches in Length
- Search Results: dexter axle d80
- Search Results: leaf spring pr6
- Search Results: pr6
- Search Results: equalizers
- Q&A: Replacement Brake Assemblies For Al-KO Or Hayes 4-Bolt Flange
- Search Results: al ko axle
- Search Results: e73sr
- Search Results: 8~201~5uc3
- Article: How to Accurately Measure Trailer Leaf Springs