Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
(58 reviews)
Price: $48.03
In Stock
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
Item # APS5
Our Price: $48.03
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (58)
- Q & A (0)
- Photos
Dexter Trailer Leaf Spring Suspension - APS5
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Dexter
Kit includes 3-1/4" tall front hangers, 7/8" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.
Features:
- Attaches 2 leaf springs (sold separately) to your trailer frame
- Use table below to determine hanger location based on type of leaf springs
- Achieves 4-3/4" or 5-3/8" clearance between trailer frame and axle, depending on axle size
- Includes:
- (2) 3-1/4" Tall front hangers (28-5)
- (2) 7/8" Tall rear hangers with steel bushings (30-20)
- (4) 3-1/8" Long shackle straps (115208)
- (6) 3" Long x 9/16" diameter shackle bolts (9163B)
- (6) 9/16" Diameter locknuts (916DLN)
- Designed for use on trailers with single, 2,000-lb to 7,000-lb axles
- Does not include components for mounting axle to springs
| Leaf Springs | A - Distance Between Hangers | B - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|---|---|---|
| SP-169275 (1020) | 20" | 5-3/8" | 1-3/4" (typical 2,000-lb trailer axle) |
| SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) | 24-7/8" | 4-3/4" | 2-3/8" (typical 3,500-lb trailer axle) |
Note: The above table provides an indication of where the included hangers can be mounted on your trailer. The distance between the hangers may vary depending on your specific application. Be sure to verify proper positioning before welding.
APS5 Single Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear - APS5
Average Customer Rating: 4.8 out of 5 stars (58 Customer Reviews)
Kit includes 3-1/4" tall front hangers, 7/8" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.by: XYooper90606/26/2018
My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.)
I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes.
This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!
by: Bryan04/02/2024
I am sorry but I can not remember names but I talked with two very helpful ladies and could not have been happier with their assistance. Thanks again, the trailer build is going great.
by: my2cents03/08/2018
Used this kit to get rid of the annoying slip springs on my Harbor Freight trailer. Everything fit nicely and the trailer is makes much less noise. I re-made the base-plate these weld onto with some Angle iron I picked up at Home Depot. (See enclosed pictures) All-in-all I am happy with this suspension kit and would recommend if you are doing a similar project.
by: allen c.03/17/2015
Just starting the manufacture of an item I finally finished design/layout. Industrial Designer for 20 years before teaching. Anyway, starting to assemble parts to begin cutting/welding/etc and some of the things you just have to touch and feel before you really know how they will work.
Purchased some spring seats, hanger kits, and U-bolt kits. Parts look fine and should work just as well. Thanks etrailer.
by: StellarVista11/01/2023
Good quality generic hanger kit. No real complaints.
by: Henry from Vt09/12/2017
Produce great. Shipped same day as ordered. Received 5 days later 1/2 way across USA. But if it has been shipped just UPS I would have received it 2 days faster, instead of UPS SUREPOST that always takes 1 to 2 days extra to transfer?
Henry V.
10/25/2022
Still in service and performing great. Just ordered another shackle rebuild parts for a larger trailer. Good Co.
by: Mark02/27/2023
Person was very knowledgably about what I needed and listened very well. So it surprised me when I received two hanger kits when she should have known by the order that I only needed one.
by: Steven l02/17/2017
Springs and hanger kit worked really well on home made camper,also the 10ply 12" tires purchased were also a good choice.will try to send a picture latter,my son will have to that for me,we thank you,good quality products at a fair price
by: Leonard 06/03/2023
Very happy with my purchase
by: Tom08/08/2018
I purchased APS5 leaf spring mounts and spring shackle kit. The quality and finish appear to be very good. Use will be on a small home built trailer should workout great. Saves a lot of time for me to do other things . Glad I found this website. Thank You
by: Timothy08/08/2018
Purchased a used 12 foot enclosed trailer,springs,bushings,hangers were a mess.
Everything I got from etrailer fit just right.
by: Thomas J.10/22/2013
Very happy with this product. I has great quality and everything you need to mount trailer leaf springs. Great kit!!!
etrailer makes it easy to "do it yourself" and the service is exceptional.
by: Jeff 10/02/2022
Worked great. Really nice hanger kit.
by: Donald Kempf01/24/2016
Good kit for the single axle trailer I built
Donald K.
1/25/2017
Great kit. I have bought multiple of these kits and happy with the quality and overall kit
by: James03/30/2018
Perfect. All the parts were in the box and exactly what I needed.. The measurements were right on. My only down was the back order. They let me make the order then a few days later told me they didn't have it so they had to wait for it. Then they said once they get it I could pay extra shipping to get it here faster.. That was wrong on there part. After I explained how wrong they did pay for the ground from ups then to ship it faster once they got the parts in. They were great in helping me when I did call.
by: Edward08/05/2020
Excellent product at a fair price. Well made. Welded them on my 30 year old trailer I am rebuilding. They were easy to put on and the suspension was nice and tight when I was done.
by: Bob S10/14/2016
Easy to order and the product is perfect. I would have given five stars but I never received any shipping notification or tracking number. I usually get an email with a tracking number anytime I order online.
by: Connie 12/06/2021
perfect for mounting the springs in the correct location as the used trailer I bought the springs were to far forward
by: Ken01/04/2017
Very easy to weld to the frame. After a year they are still holding the springs without a problem.
by: Jerald L. Stewart08/12/2013
Thank You, for processing my order so quickly. Your follow up on orders is a great help and it gives the person that is ordering a contact in case anything goes wrong.
by: Jonathan04/09/2019
Got the order super fast and just like described will buy another set for another trailer
by: Stephen08/31/2019
Fair prices, quality product and fast shipping with tracking!
by: buck05/08/2017
everything looks good ,have not put it together yet,but with previous experience with etrailer im sure it will go together fine.
by: Denise04/08/2022
Nice product. Looks heavy duty. Haven't welded them on yet but they should work fine. Everything I've purchased from etrailer has been top notch.
by: Mark10/13/2018
perfect fit made repairing my clients trailer a snap!
25
58
Show More Reviews
See what our Experts say about this Dexter Trailer Leaf Spring Suspension
- Comparing Different Hanger Kits ffor Single Axle Trailer with Double Eye Leaf SpringHi Barney! Any of the single axle kits you listed will work just fine for your single axle trailer. The main differences between the kits you listed is their height and how they install so I'll list out the differences below and you can decide from there which option is best for your trailer. - 1-1/2" Front, 7/8" Rear (4-1/4" or 4-1/2" clearance between trailer frame and axle) - Kit # APS1 - 1-1/2" Front, 1-1/4" Rear (4" or 4-1/2" clearance between trailer frame and axle) - Kit #...
view full answer... - What Leaf Springs Will My 2004 Shorelandr SLR20L For A 2004 Lund Alaska NeedI was able to do some research and your leaf springs measure 21" from center to center. The replacement springs you will need are the Dexter Axle Double Eye Leaf Spring for 2,000-lb Trailer Axles - 21" Long, part # 072-017-00 These springs are rated at 2,000 lbs. Even though you will only get three leaf springs, the weight capacity is more that enough for your boat trailer. Unfortunately, after taking a look at your photos, you may need to replace your trailers axle hangers. You will...
view full answer...
- Leaf Spring Hanger Options for 8x8 Tilt-Bed TrailerFor the springs, I'd recommend the # e84SR spring, which is designed for 2K axles and measures 20-3/8 inches from eye center to eye center. If you need a U-bolt kit for this axle, # APUBR-10 will work well. The hanger kit you use will depend on how much space you want between the axle and the trailer frame. Hanger kit # APS1 provides between 4-1/4 to 4-1/2 inches of clearance. # APS3 would give between 4 and 4-1/2 inches of clearance. # APS4 is 5 to 5-1/2 inches and # APS5 is between...
view full answer... - What are the Proper Components Needed to Install the Leaf springs On a TrailerBuilding a single axle trailer you will need the following items to install leaf springs. I have listed the part numbers for the PR626 Springs next to the items needed. 2 Springs - # e27SR 2 Front Hangers - # 115917, 1-1/2 inch tall or # 28-5, 3-1/4 inches tall 2 Rear Hangers - # 30-20, with 1-1/2 inch or # 93003-3x, with 3-1/4 inch 4 Shackle Straps - # TRSL313 6 Shackle Bolts and Nuts - # 166081 These components are available in the following Kits. Single Axle Trailer Hanger Kit 1-1/2...
view full answer...
- How to Determine the Correct Weight Distribution SystemI'll start with your last question concerning the trailer brakes - they will not stop your truck. As for a weight distribution system it is important that you have the correctly rated system; I don't what you have but I can tell you how to figure out what you SHOULD have. In order to choose the right weight distribution system you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo...
view full answer... - Orientation of Rear Hanger Installation on a Trailer with Double Eye Leaf Spring SuspensionThe portion of the rear hanger with TOP labeled on it will get welded to the trailer frame. I am including a picture of the hangar that shows the top marking and how it is positioned on the trailer. I attached an FAQ on trailer suspension for you to check out also.
view full answer...
- Are Bushings for Trailer Suspension Spring Hangers RequiredBushings do not always have to be used. Springs typically have bushings or they will use wet bolts depending on which part of the suspension system it is but not always. The bushings limit the wear on the suspension components. There are just different designs. Kits # APS2 and # APS5 use the same 7/8 inch hangers and it is those hangers that come with the bushings. I have included a link to our help article on double-eye trailer suspension for you.
view full answer... - Axle And Suspension Recommendation For Utility TrailerI think the easiest way to get the parts you need for your trailer is to buy an axle kit that comes with the idler hubs, bearings, races, seals, grease caps, wheel studs, and lug nuts. For the weight you are saying you will be carrying I recommend starting with the Dexter Trailer Axle w/ Idler Hubs, part # 20545I-EZ-72-15. This system has a 5 on 4-1/2 bolt pattern so the tire/wheel combo I recommend is the Karrier ST205/75R14 Radial Trailer Tire with 14 inch White Wheel, part # AM32153....
view full answer...
- How to Prevent Trailer Sway on a 26 ft 2011 Starcraft Autumn Ridge Towed by a 2011 F-150 EcoboostMany times adjusting the way that the trailer is loaded can help minimize trailer sway. Try loading the trailer so that more weight is toward the front of the trailer, and see if this helps. Too much weight in the back of the trailer and a light tongue weight will cause the trailer to sway. You will also want to make sure that your trailer is as close to level as possible. If your trailer is loaded properly and you are towing it level, then I would recommend is adding a weight distribution...
view full answer... - Distance Between Hangers for the # APS5 kit When Used with Leaf Spring # SP-212275Your logic about the shackle leaning the correct direction is spot-on, but the thing about leaf springs is that they flatten out when weight is put on them. So although the # e54SR you referenced is 25-1/4 inches long when uncompressed it should flatten out once installed and the weight of the trailer is on it so that the angle of the shackle strap will be correct. The best way to use the dimensions recommended for spring hanger kits is to use them as a guide. When everything is assembled...
view full answer... - How Far Apart Should Hangers Be on My Custom Built Trailer With 27" Leaf Springs?Generally speaking you want the distance between your hangers to be about 1/2" shorter than your leaf springs, since your shackle straps will allow for some movement on the springs. The hanger kit you want to use depends on how much clearance you need for your axle. A good kit that will give you about 4-1/2" of clearance from the center of your axle to the bottom of the trailer frame is the # APS5 . This kit contains the front and rear hangers as well as shackle straps and bolts needed...
view full answer... - Trailer Axle, Springs, U-Bolt Kit, and Hanger Kit Recommendation for a 3,500 lb Utility TrailerFirst let's start with the axle. For a 3,500 lb axle we offer the part # 35545I-EZ-89. This comes with idler hubs with a 5 on 4-1/2 inch bolt pattern. From hub face to face this axle measures 89 inches and between the two spring seats measures 74 inches. Your trailer will have to be compatible with both dimensions. For a U-bolt kit to mount the axles to leaf springs you would want the part # APUBR-1. For leaf springs you would want the # e54SR. For a hanger kit you would want part # APS5. For...
view full answer... - Are There Torque Specs for Trailer Suspension Hanger Shackle BoltsThere isn't a specific torque spec for shackle bolts like what come with the hanger kit part # APS5 you referenced. They need to be secure enough but if they are too tight then the leaf springs will bind and cause problems in your trailer's suspension. The lock nuts included with the kit will ensure the bolts do not fall out. I recommend tightening the nuts until they makes contact with the shackle strap and then add another 1/4 turn. This should give you the right amount of torque needed...
view full answer... - Trailer Sways Above 40-50 Miles Per HourIf a trailer is swaying exclusively at certain speeds, rather than in response to passing traffic or gusts of wind, three possible culprits come immediately to mind. First would be the loading of the trailer. If the trailer has insufficient tongue weight (not enough weight at the front of the trailer) sway can be caused. Try loading the trailer so that more of the weight is forward of the trailer axle. Secondly, a bent axle can cause the sway you are experiencing. This might not be very...
view full answer... - Should Suspension Shackle Straps Angle Towards the Front or Rear of a TrailerThe distance between the spring eyes on center for # e54SR is 25-1/8 inches. When using hanger kit # APS5 the distance on center between the hangers with this spring is 25-3/4 inches, a 1/2 inch longer. This is correct. The hanger spacing should be longer and the bottom of the shackle strap should angle towards the front. Once there is weight on the suspension the angle of the shackle will change.
view full answer... - Troubleshooting Bouncy Ride and Loss of Clearance After Hanger and Leaf Spring InstallationAlthough they are not rated significantly higher, installing the # e57SR could result in a noticeable difference in the ride. Springs rated for your 3,500 lb axle (1,750 lb spring capacity) would be the better option. I'm not sure what you had before, but the replacement leaf springs should be approximately the same length as the old leaf springs on your travel trailer. That is, the spring eye to spring eye measurement. Since the old leaf springs were flat the replacement should be a bit...
view full answer... - Determining the Leaf Spring Drop From an Empty Trailer to a Fully Loaded TrailerThe drop that you will experience with the 3-Leaf Double-Eye Spring for 2,500-lb Axles, # e66SR, from a trailer at zero load to full load is going to be 1-1/2 inches. A few things to note with a fully loaded trailer is that you will want at least 3 inches of clearance above your tires and 2 to 2-1/2 inches of clearance from the top of your axle to the bottom of the frame where the leaf spring hangers are welded. You will also want to get the correct hanger kit for the leaf springs you...
view full answer... - Mounting Hardware Needed To Install 3,500LB Axle & Double Eye Leaf Springs on a Torsion Axle TrailerHere is a list of suspension kits we have that contain the hangers, shackle straps and mounting bolts for the leaf springs. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS2 Single-Axle Trailer Hanger Kit 3-1/4" Front, 7/8" Rear # APS5 Single-Axle Trailer Hanger Kit 1-1/2" Front, 7/8" Rear # APS1 Here are kits for just the spring hangers. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS3 Single-Axle Trailer Hanger Kit 3-1/4" Front, 1-1/4" Rear # APS4 We...
view full answer... - Recommended Suspension Parts Needed To Build A Smoker TrailerLooks like you have quite a project going here. After consulting with other Experts, the first thing I would recommend is a new axle for your trailer frame. It appears the axle you have was originally used on a car and welded to the trailer. I could not recommend any suspension that could safely be used with the axle in your photos. I have attached a help article that explains how to determine the correct axle position. The next thing to consider is that you will have to build your trailer...
view full answer...
- Selecting Replacement Front Spring Hanger for 2000-lb AxleIf you are replacing an existing front hanger on your trailer you can measure the original hanger to help you select a replacement. The linked article will be helpful. If the trailer is a single axle type then the front and rear hangers do not have to be the same height. You can choose a hanger of the height that provides the appropriate clearance between the axle and frame.
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Xyooper906
6/26/2019
I recently carried over a ton of rip-rap with my trailer. The trailer still had plenty of of axle and fender clearance. This kit has proved to be just the remedy for my landscape trailer.